8-98070-321-1 Isuzu Starter Motor 24V 5.0kW 13T

8-98070-321-1 Heavy-Duty Truck Starter Motor for ISUZU 4HK1

For importers preparing distributor pricing, built for ISUZU 4HK1, this heavy-duty truck starter motor combines 24V operation, 5.0kW rated power and a 13T drive. Elecdura supplies 8-98070-321-1 for truck, bus and fleet replacement programs, including distributor stock and planned replenishment.

For inventory buyers building a new starter range, this page is designed to support a distributor decision: identify the correct replacement, confirm the key specification, define packaging and inspection needs, and request one consistent quotation for the required quantity.

8-98070-321-1 Starter Motor Specifications and Technical Drawing

For engine-parts specialists checking version-defining data, the 13T pinion is a fast visual identifier, but the purchase decision should also retain 24V, 5.0kW, the mounting geometry and terminal position.

For fleet-parts buyers confirming electrical ratings, the source-faithful technical drawing records the available mounting information for 8-98070-321-1, including Ø115, 1.5 mm; use the printed values together with the product views because the drawing supports comparison and should not be scaled from the screen.

8-98070-321-1 Aftermarket Replacement and Application

For maintenance suppliers separating similar housings, ISUZU 4HK1 is the stated application for 8-98070-321-1. Buyers comparing 8-98070-321-1 should confirm that the old starter shares the same 24V system, 5.0kW output and 13T drive before adding the item to a distributor order.

For equipment-parts dealers evaluating a direct replacement, product photos and the stated specifications should be reviewed together. If the old starter uses another pinion, mounting face or rear connection, keep that configuration on a separate RFQ until it is identified.

8-98070-321-1 Wholesale Supply for Distributors and Importers

For purchasing teams confirming commercial terms, wholesale enquiries for 8-98070-321-1 can combine product matching with packaging and inspection planning. Elecdura offers neutral packaging and private-label review for qualified orders, with 20 pcs MOQ, 7–15 days subject to confirmation and an 18-month warranty under agreed terms.

For distributors planning mixed-model inventory, the order specification may include armature, solenoid, no-load or load testing together with label and packaging requirements. This gives receiving teams practical points for sampling a batch without treating appearance alone as proof of fitment.

8-98070-321-1 Starter Motor Buyer FAQ

How can a buyer screen 13-tooth pinion identification for warehouse identification?

For replacement-parts sellers evaluating a direct replacement, count all 13 teeth on the 8-98070-321-1 pinion and compare the gear diameter with the removed starter. Tooth count is a fast screening point, but engagement depth, pitch and rest position still need agreement. If the old unit carries another count, treat it as a different drive version and review the ring gear before fitting.

How can an importer validate 5.0kW output on ISUZU 4HK1 before accepting a substitute?

For service-parts networks comparing the flange and terminals, the 5.0kW rating belongs to the 8-98070-321-1 configuration used for ISUZU 4HK1. Verify the old-unit rating and investigate battery voltage, cable drop and engine turning resistance before choosing another output. A higher or lower kW figure is not an automatic upgrade; it can indicate a separate starter design with different electrical and mechanical requirements.

Which detail separates 8-98070-321-1 ring-gear engagement for a first wholesale order?

For importers reviewing a replacement proposal, review the 13T pinion, module 3, rest position and available axial dimensions as one engagement set. Inspect the ring gear for wear before fitting. A correct bolt pattern cannot protect the gear if pitch or projection differs, so drive geometry should be resolved before the starter is energized.

What must be matched before quoting 8-98070-321-1 before comparing delivery options?

For product managers preparing a technical RFQ, 8-98070-321-1 should be treated as one inquiry group only after the actual starter is compared. Ask the customer for the complete label and clear views of the drive end, flange and terminals. If a suffix, housing shape or terminal clocking differs, keep it as a separate offer line instead of assuming that the shared number guarantees interchangeability.

Which detail separates Ø115 and 1.5 mm before accepting a substitute?

For maintenance suppliers checking version-defining data, use the supplied technical drawing to compare Ø115 and 1.5 mm. Take each measurement from the same face shown or described, then compare the locating shoulder, bolt pattern and drive-end projection as one set. A single matching diameter is not enough if the hole pattern or axial reach places the pinion differently.

What must be matched before quoting 8-98070-321-1 drive-end photograph for a first commercial order?

For equipment-parts dealers confirming electrical ratings, the drive-end image for 8-98070-321-1 should be used to count 13 teeth and compare the flange, locating shoulder and pinion rest position. Photograph the removed starter from the same straight-on angle under even lighting. A side view alone may hide the deciding tooth and mounting information, so keep the direct drive-end view with the RFQ.

How should a distributor confirm 8-98070-321-1 terminal access when the starter being replaced is available?

For purchasing teams checking repeat-order specifications, compare the rear housing and terminal direction in the approved product views for 8-98070-321-1. The battery cable and start-signal lead must reach without sharp bends, rubbing or contact with hot and moving parts. If the body can be clocked differently within the same reference family, confirm the actual terminal position before stock is committed to the order.

How should a distributor confirm 8-98070-321-1 cartons and units for repeatable sourcing?

For distributors planning replenishment, sample cartons from different positions in the shipment and compare the 8-98070-321-1 labels, 24V marking, 13-tooth pinion, flange shape and terminal protection with the procurement specification. Photograph any mixed marking, damaged terminal or different drive end ahead of installation, and isolate those pieces so the rest of the lot can be assessed consistently.

Request a Wholesale Quote for 8-98070-321-1 Heavy-Duty Truck Starter Motor

For aftermarket product managers confirming an incoming batch, ask for a quote on 8-98070-321-1 with the full ISUZU 4HK1 record, quantity and packaging plan. We will verify the requested 24V, 5.0kW and 13T configuration and return the relevant wholesale terms.