12769577010 Yanmar 4CX Starter Motor Marine Wholesale

12769577010 Yanmar 4CX Starter Motor Value for Marine Distributors

Marine starter selection must be completed before a vessel service visit whenever access and travel are costly. Linking 12769577010 with the 4CX engine plate, vessel details and removed starter gives a distributor a practical basis for planned overhaul or breakdown supply.

The 15T module-2.54 drive and four-point flange distinguish this starter from common three-hole industrial units. Confirm the four mounting holes, Ø95 locating face, bolt angles, pinion form and cable orientation before shipping to the vessel or service port.

12769577010 Starter Motor Four-Hole Drawing for Wholesale Matching

The specified configuration is 24V, 4.5kW, 15T, module 2.54 and clockwise rotation. Those values should remain together on the order line because pinion form and voltage are both essential when marine equipment documentation is incomplete.

12769577010 Starter Motor Dimensions for Yanmar 4CX Marine Supply — compare the drawing with the removed starter before placing a volume order.

The drawing identifies four Ø13 holes on an Ø120 reference circle, an Ø95 locating diameter, a 19 mm axial reference and 76.5°, 57.5° and 13.5° angles. Square photographs help the buyer compare this uneven four-hole orientation accurately.

12769577010 Starter Motor Reference Checks for Marine Parts Buyers

12769577010 and 127695-77010 connect with 03504020271, 0350-402-0271 and STW2851ML. Keep the 4CX engine and 15T drive on the same request so the cross-reference group does not become a general Yanmar marine starter description.

Marine distributors can separate scheduled overhaul quantities from emergency vessel-service reserve. Retaining the engine, vessel and confirmed flange view on each order helps prevent one unit from being redirected to another Yanmar installation without a new comparison.

12769577010 Starter Motor Vessel Supply and Test Video

Export packing should protect the 15T pinion, four-hole flange, solenoid studs and finish against handling and moisture exposure. Receiving teams can inspect these areas against the confirmed photographs before the starter enters vessel-service inventory.

For a Yanmar 4CX supply program, the following factory video shows Elecdura's starter assembly and electrical-test capability. Marine distributors can consider that process together with moisture-conscious packing, shipment labels, order quantities, delivery schedule and consistent incoming checks.

12769577010 Starter Motor FAQs for B2B Buyers

What should a Yanmar 4CX buyer send with 12769577010?

Provide the Yanmar 4CX engine designation, engine serial information and vessel or equipment details. Add the complete old-starter number and clear photographs of the four-hole flange, 15T pinion and terminals. Elecdura will use this information to compare the marine installation before preparing quantity pricing, packing and delivery options for 12769577010.

How does the four-hole drawing help confirm the 4CX starter?

Compare all four Ø13 holes on the Ø120 reference circle, paying attention to the 76.5°, 57.5° and 13.5° angle callouts. The pattern is not symmetrical enough to judge casually from one photograph. A square front view of the removed unit lets Elecdura check the real mounting orientation before marine quantities are committed.

Which drive details define 12769577010 for Yanmar 4CX?

The required drive is 15T, module 2.54 and clockwise, with the drawing showing a 19 mm axial reference. Count the pinion teeth from a clear end view and compare the side position with the old starter. These checks prevent a same-voltage marine starter with another gear form from reaching the engine room.

What packaging is appropriate for a marine 12769577010 starter?

Use a sealed moisture barrier around the protected unit, desiccant where the buyer's route requires it, and a rigid carton that shields the pinion and terminal studs. Mark the carton for dry storage and keep it off wet deck surfaces. For long-term onboard spares, the buyer should also define storage interval and inspection expectations.

When does it make sense to carry a spare 4CX starter onboard?

Consider the vessel's route, access to shore parts, number of 4CX engines, operating schedule and replenishment time. A critical auxiliary or propulsion-support application may justify an onboard spare even with low annual usage. Keep the spare dry, labeled with 12769577010 and periodically inspected so it remains useful when required.

Which references support sourcing the Yanmar 15T starter?

Use 12769577010 or 127695-77010 as the main Yanmar number, with 03504020271, 0350-402-0271 and STW2851ML as supporting references. Keep the 4CX engine and 15T module-2.54 drive on the same request. Elecdura will compare the reference group with the four-hole mounting face before confirming supply for a production order.

How should a marine distributor receive and store this starter?

Inspect the outer carton for water exposure, then check the pinion, four-hole flange and terminals for corrosion or impact. Confirm the label and photograph any damage before removing protective materials. If the unit will remain a spare, restore the moisture barrier after inspection and store it in a dry warehouse area with the delivery date recorded.

What does Elecdura need to quote 12769577010 for marine supply?

Send the confirmed 4CX details, old-unit images, required quantity, preferred moisture-protection standard, destination and target delivery date. Elecdura will return product-matching feedback, unit pricing, supply timing, packing options and shipping terms. This gives the buyer one response covering both the 15T starter definition and the practical marine delivery requirements.

Request 12769577010 Yanmar Marine Starter Motor Pricing

Send the Yanmar 4CX engine plate, vessel or equipment details, all starter markings, square mounting and terminal photographs, quantity, packing needs and destination to info@elecdurauto.com. Elecdura will review 12769577010 and provide marine distributor pricing.