128000-2450 Isuzu 6SA1 24V 4.5kW Starter Motor Bulk Supply

128000-2450 Isuzu 6SA1 Starter Motor Distributor Sourcing

Elecdura supplies 128000-2450 for Isuzu 6SA1 to parts distributors, rebuilders and fleet-service buyers. This ND-type replacement is specified as 24V, 4.5kW and 11T; keeping those facts beside the application makes sample comparison and repeat purchasing more consistent.

Fleet workshop teams handling first-order sourcing should send 128000-2450, the Isuzu 6SA1 record, required quantity, destination and delivery timing together. Add straight drive-end and terminal-side photographs of the removed starter. Elecdura can then address fewer fitment returns, single-reference cartons and the correct physical configuration in one useful commercial offer.

128000-2450 Starter Motor B2B Specification

Receiving and technical teams should concentrate on 11T pinion and 40mm reference, mounting face, drive reach, solenoid position and terminal orientation. A square drive-end image plus a side image gives a much clearer comparison of mounting, locating and pinion relationships than a general product shot, reducing the chance of releasing a visually similar but unsuitable unit.

Confirm the machine system as 24V and retain the 4.5kW, 11T specification on the RFQ. Check that the main cable and control lead can reach their studs without tight bends or interference, especially where the starter sits close to engine or frame components.

128000-2450 Starter Motor Cross-References for Wholesale Supply

For repeat supply, store 128000-2450, Isuzu 6SA1, the received lot and the confirmed old-unit photographs together. That record allows a distributor to reorder the same configuration without rebuilding the decision from a loose list of aftermarket numbers.

For first-order sourcing, keep 128000-2450, Isuzu 6SA1, 24V, 4.5kW and 11T on one purchasing record. At goods-in, review terminal clocking and cable clearance before releasing the lot. This gives the fleet workshop a documented basis for fewer fitment returns when the next order is raised.

128000-2450 Starter Motor Wholesale Packaging and Replenishment

Wholesale buyers may combine an initial verification order with a forward replenishment plan, provided each reference remains clearly separated. Normal terms are MOQ 20 pieces, 7–15 days after confirmation and an 18-month warranty; packing and freight are quoted for the stated destination.

Demand from an industrial-engine distributor should keep 128000-2450 tied to Isuzu 6SA1. For first-order sourcing, the fleet workshop can use a repeat-lot release rule, store the pinion-side receiving image and review terminal clocking and cable clearance at goods-in. This supports fewer fitment returns while keeping single-reference cartons visible.

The video below introduces Elecdura starter-motor production and electrical testing for B2B supply. Buyers can review factory capability while using the 128000-2450 application and specification shown above for their own product comparison.

128000-2450 Isuzu 6SA1 Starter Motor FAQs

How can a fleet workshop source 128000-2450 for first-order sourcing?

Fleet workshop teams should tie 128000-2450 to Isuzu 6SA1, 24V, 4.5kW, 11T and the removed-unit photographs before requesting price. For first-order sourcing, state quantity, destination and delivery timing, then review terminal clocking and cable clearance. Ask Elecdura to address single-reference cartons and fewer fitment returns in the same quotation.

Terminal clocking and cable clearance check: When is a sample order useful for 128000-2450?

A sample is useful when the old label is incomplete, the application record is uncertain or several similar housings are in local stock. Confirm the sample against mounting, drive and electrical details before scaling the order. Keep the accepted photographs and measurements for later purchasing and receiving checks. Keep 128000-2450 traceable through first-order sourcing.

Terminal clocking and cable clearance check: Why should Isuzu 6SA1 stay on the 128000-2450 order line?

The application gives purchasing and receiving teams context that a reference alone may not provide. Keeping Isuzu 6SA1, the electrical rating, pinion and confirmed photographs together makes repeat ordering clearer and reduces the chance that a visually related starter from another machine or engine family is substituted. File 128000-2450 with the terminal clocking and cable clearance check.

During first-order sourcing, what should be checked before installing the 128000-2450 starter?

Load-test the battery, measure voltage drop on positive and ground circuits, inspect cable lugs and confirm the engine turns freely. Check the ring gear and mounting-ground contact as well. These steps help separate a starter concern from weak batteries, high resistance or mechanical drag that can produce similar symptoms. File 128000-2450 with the terminal clocking and cable clearance check.

During first-order sourcing, how should alternate references for 128000-2450 be handled?

List every complete alternate on a separate RFQ line and state whether it came from a label, invoice or parts record. Compare voltage, output, pinion, mounting and terminals before treating it as interchangeable. If one point remains uncertain, request a separate offer instead of combining the numbers. Carry the 128000-2450 result into single-reference cartons.

For first-order sourcing handled by a fleet workshop, can 128000-2450 be supplied with private-label packaging?

Neutral packaging is available, and private-label requirements can be reviewed for qualified orders. Send the expected quantity, artwork, label fields, carton preference and destination early. Elecdura will confirm what can be supported, any additional preparation and the effect on lead time before the order is finalized. Retain 128000-2450 for fewer fitment returns and receiving review.

For first-order sourcing handled by a fleet workshop, what should receiving staff inspect on the 128000-2450 shipment?

Confirm carton count, labels and visible condition before sampling. On selected units, compare the pinion, mounting face, solenoid and terminals with the confirmed record. Isolate any damaged or different unit with carton and lot photographs before the remainder is released to normal Isuzu 6SA1 inventory. Keep 128000-2450 traceable through first-order sourcing.

For first-order sourcing handled by a fleet workshop, how should branches keep 128000-2450 separate from similar starters?

Use the full reference, Isuzu 6SA1 application and core specification on the internal item label. Store the confirmed product photographs with the ERP record and avoid abbreviating the number. Receiving staff can then compare each new lot with the same documented configuration before distributing it to branches. File 128000-2450 with the terminal clocking and cable clearance check.

Request 128000-2450 Starter Motor Wholesale Pricing

Email info@elecdurauto.com with 128000-2450, Isuzu 6SA1 details, old-unit photographs, quantity, delivery country and required date. Elecdura will reply with the matching 24V 4.5kW 11T offer, availability, packing, lead time and freight options.