M0T60782 Nissan X-Trail 12V 1.2kW Starter Motor Bulk Supply

M0T60782 Nissan X-Trail Starter Motor Distributor Sourcing

The M0T60782 starter for Nissan X-Trail is intended for replacement demand. It combines 12V, 1.2kW output with the 13T drive, allowing B2B buyers to keep the quotation tied to one application and physical configuration rather than a broad visual description.

Machine-repair contractor teams handling consolidated shipment should send M0T60782, the Nissan X-Trail record, required quantity, destination and delivery timing together. Add straight drive-end and terminal-side photographs of the removed starter. Elecdura can then address cleaner branch replenishment, mixed-SKU export packing and the correct physical configuration in one useful commercial offer.

M0T60782 Starter Motor B2B Specification

Compare 13T pinion and 40mm reference, mounting face, drive reach, solenoid position and terminal orientation first, then inspect the housing clearance around the drive end. The purpose is to confirm how the unit mounts and engages, not merely whether it resembles another starter in the warehouse.

Electrical identity and mechanical fit must agree. Verify 12V, the 1.2kW rating and terminal layout, then count the 13 pinion teeth. A correct flange with the wrong system voltage, output or cable position is not an acceptable substitute.

M0T60782 Nissan X-Trail Starter Motor Reference Control for Distributors

Keep the reference group M0T60782 attached to the Nissan X-Trail details and confirmed photographs. This gives branch staff a practical reorder record and prevents a number from being separated from the exact configuration previously received.

For consolidated shipment, keep M0T60782, Nissan X-Trail, 12V, 1.2kW and 13T on one purchasing record. At goods-in, review drive-end geometry before releasing the lot. This gives the machine-repair contractor a documented basis for cleaner branch replenishment when the next order is raised.

M0T60782 Starter Motor B2B Supply for Nissan X-Trail

For qualified B2B orders, the normal MOQ is 20 pieces and preparation is usually 7–15 days after the order is confirmed. Elecdura can discuss neutral cartons, private-label review, export documents and an 18-month warranty according to the agreed quotation.

Demand from an engine-overhaul workshop should keep M0T60782 tied to Nissan X-Trail. For consolidated shipment, the machine-repair contractor can use a central-to-branch transfer plan, archive the carton and lot label and review drive-end geometry at goods-in. This supports cleaner branch replenishment while keeping mixed-SKU export packing visible.

This video shows Elecdura production and electrical-testing capability for starter-motor supply. It supports supplier evaluation; the M0T60782 order should still be based on the listed application, electrical data and physical unit checks.

M0T60782 Nissan X-Trail Starter Motor FAQs

How can a machine-repair contractor source M0T60782 for consolidated shipment?

Machine-repair contractor teams should tie M0T60782 to Nissan X-Trail, 12V, 1.2kW, 13T and the removed-unit photographs before requesting price. For consolidated shipment, state quantity, destination and delivery timing, then review drive-end geometry. Ask Elecdura to address mixed-SKU export packing and cleaner branch replenishment in the same quotation.

For consolidated shipment handled by a machine-repair contractor, how should 12V be confirmed for M0T60782?

Check the machine electrical system, old-starter label and service record before ordering. Keep 1.2kW, 13T and the terminal arrangement in the same comparison. A starter can have a similar flange but the wrong voltage, output or cable layout, so these facts should be confirmed together. This supports cleaner branch replenishment for M0T60782.

Machine-repair contractor receiving review: What should receiving staff inspect on the M0T60782 shipment?

Confirm carton count, labels and visible condition before sampling. On selected units, compare the pinion, mounting face, solenoid and terminals with the confirmed record. Isolate any damaged or different unit with carton and lot photographs before the remainder is released to normal Nissan X-Trail inventory. Keep M0T60782 traceable through consolidated shipment.

What should a buyer include in the M0T60782 quotation request?

Send the complete M0T60782 reference, Nissan X-Trail details, quantity, destination and required date. Add clear front, side and terminal photographs of the removed starter. This gives Elecdura enough information to discuss the intended 12V 1.2kW 13T unit, packing, lead time and freight in one focused offer. Link M0T60782 photographs to the drive-end geometry record.

To support cleaner branch replenishment, is a matching 13T pinion enough to approve M0T60782?

No. Tooth count is only one control. The locating face, mounting pattern, pinion reach, 40mm reference, solenoid position, terminals and 12V system must also agree with the removed starter. Review the full set before a sample or bulk order is accepted. Carry the M0T60782 result into mixed-SKU export packing.

For mixed-SKU export packing, how should alternate references for M0T60782 be handled?

List every complete alternate on a separate RFQ line and state whether it came from a label, invoice or parts record. Compare voltage, output, pinion, mounting and terminals before treating it as interchangeable. If one point remains uncertain, request a separate offer instead of combining the numbers. Retain M0T60782 for cleaner branch replenishment and receiving review.

What should be checked before installing the M0T60782 starter?

Load-test the battery, measure voltage drop on positive and ground circuits, inspect cable lugs and confirm the engine turns freely. Check the ring gear and mounting-ground contact as well. These steps help separate a starter concern from weak batteries, high resistance or mechanical drag that can produce similar symptoms. Retain the M0T60782 result for consolidated shipment.

During consolidated shipment, how can a distributor plan stock for M0T60782?

Use active Nissan X-Trail customers or machines, recent usage, replenishment time and the cost of an emergency shortage. Separate trial pieces from normal branch stock and project demand. A defined reorder point is more reliable than buying a mixed group only when one urgent workshop request appears. File M0T60782 with the drive-end geometry check.

Ask for M0T60782 B2B Starter Motor Supply Terms

Email info@elecdurauto.com with M0T60782, Nissan X-Trail details, old-unit photographs, quantity, delivery country and required date. Elecdura will reply with the matching 12V 1.2kW 13T offer, availability, packing, lead time and freight options.