STH2959MH Isuzu 4JB1 24V 3.5kW Starter Motor Wholesale

STH2959MH Isuzu 4JB1 Starter Motor Supply for Industrial Buyers

Industrial-engine distributors may receive an STH2959MH enquiry from equipment that lacks a complete machine description. The Isuzu 4JB1 engine plate, 24V system and straight mounting photographs create a stronger product definition for quotation and repeat stock.

A general 4JB1 search returns several starter families. For STH2959MH, verify the 9T drive, two Ø13 holes, 35-degree upper orientation, Ø95 locating diameter and terminal side instead of borrowing dimensions from a better-known S24-07 product.

STH2959MH 3.5kW Ratings and 35-Degree Mounting Drawing

This starter is defined as 24V, 3.5kW, 9T, module 3 and clockwise rotation. Keeping the complete set on the order gives technical staff a consistent product definition when the short reference alone is not enough for physical matching.

STH2959MH Isuzu 4JB1 Starter Dimensions for Industrial Supply — compare the drawing with the removed starter before placing a volume order.

Use the drawing to compare the Ø120 face, Ø95 locating diameter, 22 mm axial position and 9.5 mm drive reference. Measurements from the removed starter or a trusted sample should be taken squarely, with the mounting surface visible.

STH2959MH Physical Matching for Isuzu Engine Distributors

STH2959MH is the lead number for this product. Keep it with the 4JB1 engine, stated electrical rating, 9T drive and 35-degree mounting face rather than expanding the OE group with unrelated numbers.

Distributors can attach the accepted STH2959MH image set to the customer's equipment account and 4JB1 engine plate. That turns a weak initial request into a reusable stock identity without making a broad fitment statement.

STH2959MH Industrial Stock Support and Production Video

Incoming checks should include the rating label, 9T pinion, 35-degree face, locating surface, terminals and packing condition. A retained comparison sheet is useful for industrial units that may remain in slow-moving inventory until a breakdown occurs.

The Elecdura video below introduces starter production and electrical testing for wholesale programs. Industrial buyers can review manufacturing capability while STH2959MH remains tied to the confirmed 4JB1 engine and physical comparison.

STH2959MH Starter Motor FAQs for Isuzu 4JB1 Industrial Buyers

What evidence is useful when STH2959MH is the only readable number?

When STH2959MH is the only readable number, send clear label, drive-end, side and terminal photographs along with the Isuzu 4JB1 engine plate. Measure the two-hole face and show the 35-degree upper-ear orientation. Combining the short reference with physical evidence gives purchasing a stronger basis than the number alone.

Which 4JB1 engine details should be included with the request?

Include the 4JB1 engine model and plate, equipment type, electrical system voltage and any vehicle or machine serial details available. Add every old-starter marking and square photographs of the mounting face and terminals. These points help connect STH2959MH to the stated 24V 3.5kW 9T clockwise configuration.

How does the 35-degree upper ear help identify this drive end?

The 35-degree upper ear gives the drive end a measurable orientation that can separate it from another two-hole housing. Compare the angle with the drawing, then confirm both holes, Ø95 locating reference, 9T pinion and terminal position. A front photograph should be square enough to preserve the apparent angle.

Why should unrelated S24-07 OE numbers not be added automatically?

Unrelated S24-07 numbers may point to another starter family with different fitment or drive details. Adding them without supporting evidence would broaden the search group and make purchasing less precise. Keep STH2959MH tied to the 4JB1 engine, 24V 3.5kW 9T specification and 35-degree two-hole mounting face.

What measurements should be taken from a trusted old-unit sample?

Measure both mounting holes, their angular relationship, the locating diameter and the pinion position from a trusted old unit. Count the nine teeth and photograph the label, full body and terminals. Use the same orientation as the drawing so another buyer or receiving inspector can repeat the STH2959MH comparison.

How can slow-moving industrial stock remain identifiable over time?

Use a durable bin label showing STH2959MH, Isuzu 4JB1, 24V 3.5kW, 9T and the 35-degree two-hole face. Keep a printed or digital reference image with the location. Periodic shelf checks should confirm the label remains readable and the carton still protects the mounting ears and terminals.

Which incoming checks help confirm a low-volume STH2959MH shipment?

Sample several cartons and compare the STH2959MH label, 9T pinion, 35-degree mounting face, Ø95 location, body and terminals with the accepted product images. Check the 24V 3.5kW marking and packaging condition as well. Hold any mixed label, damaged unit or different housing before the shipment enters industrial stock.

What should a distributor send for STH2959MH wholesale pricing?

Send the 4JB1 engine plate, equipment model, clear images of the complete old starter, available measurements, required quantity, packing preference, destination and delivery timing. Identify any unreadable areas on the label. Elecdura can then quote STH2959MH while keeping the 24V 3.5kW 9T and 35-degree configuration explicit.

Request STH2959MH Isuzu 4JB1 Starter Motor Wholesale Pricing

Email the Isuzu 4JB1 engine plate, equipment type, complete STH2959MH marking, straight front, side and terminal photographs, measured mounting details, quantity and destination to info@elecdurauto.com. Elecdura will compare the product details and provide wholesale pricing.