128000-7600 Volvo TD60 11T Starter Motor Wholesale

128000-7600 Volvo TD60 11T Starter Motor Value for Wholesalers

Volvo TD60 and related engine fleets can contain starters with shared reference numbers but different pinion versions. This product line makes the 11T drive explicit so a fleet supplier can discuss demand, warehouse labeling and replacement history without merging it with the 9T option.

The 11T and 9T variants share the same two-ear mounting dimensions in the supplied range, so flange geometry cannot separate them. Count the pinion teeth directly, confirm module 3 and compare the old-unit terminal position before picking 128000-7600 stock.

128000-7600 11T Starter Motor Dimensions for B2B Verification

This variant is specified at 24V, 4.5kW, 11T, module 3 and clockwise rotation. The 11T identifier should appear on the enquiry, carton label and receiving note because the reference number and voltage are also used for the separate 9T product.

128000-7600 11T Starter Motor Dimensions for Volvo TD60 Supply — compare the drawing with the removed starter before placing a volume order.

The common housing drawing shows two Ø11 mounting holes on an Ø127 reference circle, an Ø89 locating diameter and 48 mm and 18 mm axial references. Use these dimensions to confirm the housing, then use a clear pinion photograph to confirm 11T.

128000-7600 Starter Motor OE Matching for Volvo Fleet Buyers

128000-7600 through 128000-7604, LRS02153, LRS2153, 420760, 8113860 and 8192262 form the sourcing group. Because the same group can lead to another tooth version, every quotation should state 11T beside the complete reference.

Volvo truck and industrial-engine distributors should keep separate item names and bin locations for the 11T and 9T versions. Engine model, old-unit image and counted teeth provide the information needed to assign each customer order to the correct stock.

128000-7600 11T Starter Motor Stock Support and Test Video

Receiving staff should count the pinion teeth on several units before branch allocation, then inspect the two-ear face, locating surface, terminals and shipment labels. An 11T-marked photo set gives later replenishment teams a clear visual separator.

Elecdura's factory video introduces starter assembly and electrical testing for wholesale supply. Volvo parts buyers can review that capability while defining tooth-count labels, batch inspection, export packing, quantities and delivery timing for the 11T program.

128000-7600 Starter Motor FAQs for B2B Buyers

How should buyers identify the 11T 128000-7600 version?

State 11T explicitly on the RFQ and provide a clear end photograph of the removed pinion so the count is visible. Add the Volvo engine code and complete old-unit number. Elecdura will compare the 11T module-3 drive, mounting face and axial dimensions, preventing the shared 128000-7600 reference from hiding the version required by the customer.

Which Volvo engine details help confirm the 11T starter?

Provide the full engine designation—TD60B, TD60C, TD61G or TD63E—plus the truck or equipment model and serial information. Keep those details with the starter photographs and references. This lets Elecdura compare the product within the actual installation and gives fleet or distributor purchasing teams a clearer description for repeat supply.

Can 420760 or 8192262 be used to source this 11T product?

Yes, include 420760, 8113860 or 8192262 with the Denso 128000-7600 through 128000-7604 group when available. The enquiry must also state 11T, module 3 and the Volvo engine. Elecdura will not use the number group alone; the pinion and mounting checks remain part of the product confirmation.

What dimensions accompany the 11T Volvo mounting face?

The two-ear flange uses two Ø11 holes on an Ø127 reference circle, with an Ø89 locating diameter and 48 mm and 18 mm axial references. Compare these measurements with the old unit and count the pinion separately. Matching the flange does not prove the 11T version when another listed option shares the same housing geometry.

How should warehouses separate 11T and 9T Volvo units?

Create separate stock lines and bin locations, with 11T or 9T displayed prominently beside the full OE and engine application. Use different warehouse barcodes or color accents if the system allows, while retaining the accepted pinion photograph. Never combine the variants under one quantity simply because both carry 128000-7600 in the reference group.

What should a fleet retain for repeat 11T orders?

Keep the Volvo engine and vehicle details, accepted 11T pinion photograph, complete reference group and the confirmed mounting-face image with the purchase history. Repeat orders should quote the same version rather than only 128000-7600. If the fleet adds another TD engine or receives a different old unit, compare it separately before combining quantities.

What receiving check is essential for the 11T Volvo batch?

Verify the version label and count the pinion teeth on every opened sample before units enter the 11T bin. Compare the two-ear flange and terminal side with accepted images, then record the lot and inspected quantity. If 9T and 11T products arrive together, keep the cartons physically separated throughout receiving and put-away.

How will the Elecdura quotation identify the 11T version?

The offer will state 128000-7600, Volvo TD60/TD61/TD63 application and 11T module 3 clearly, followed by unit price, quantity basis, lead time, packing and delivery terms. Matching feedback will refer to the submitted old-unit information. This lets the buyer compare the quotation without confusing it with the separate 9T product.

Request 128000-7600 Volvo 11T Starter Motor Wholesale Pricing

Email the Volvo engine or vehicle model, complete old-unit number, clear pinion and terminal photographs, required quantity, packing preference and destination to info@elecdurauto.com. Elecdura will confirm the 128000-7600 11T definition and prepare wholesale pricing.