128000-1780 Teledyne Continental Starter Motor Wholesale Supply

128000-1780 Continental Starter Motor Support for Engine Rebuilders

Industrial engines are frequently repowered or installed in equipment whose machine badge no longer reflects the original starter specification. For 128000-1780, the engine plate, complete Denso number and two-hole drive end provide a stronger buying identity than the equipment name alone.

Send the Teledyne-Continental engine model and serial, photographs of the removed label, mounting face, pinion and terminals, and any previous rebuild number. Elecdura compares those details with the 10T clockwise configuration and returns dimensions that the rebuilder can verify before assembly.

128000-1780 Starter Motor Specifications and B2B Fitment Drawing

128000-1780 10T starter motor mounting and drive-end dimensions for buyer-side comparison.

Teledyne-Continental rebuilders can identify this unit through 2 × Ø11 mounting holes, 89 mm engagement reference, 20 mm distance-to-drive-gear reference and Ø127 mounting-circle reference. The two-hole geometry is valuable when a repowered machine no longer provides a reliable original equipment description.

Measure the starter removed from the engine and photograph both the drive end and installed cable clearance. Linking those checks to the engine serial gives rebuilders a dependable 128000-1780 comparison without assuming every host machine has the same installation space.

128000-1780 Starter Motor Reference Mapping for Industrial Buyers

The Denso sequence includes 128000-1781, 128000-1782, 128000-3030, 128000-3031 and 128000-3032, while service records may show S6401S, 246-25110, S-8277, STR70205 or 17385N. Retain the exact number found on the engine rather than selecting only the shortest reference.

1. Confirm 12V, 2.5kW, 10 teeth and CW rotation.

2. Compare two Ø11 holes on the Ø127 circle.

3. Measure the 89 mm engagement and 20 mm drive-gear distance.

128000-1780 Starter Motor Supply for Legacy Industrial Equipment

A rebuilder can reduce repeat identification work by attaching the successful starter number, face photograph and terminal orientation to the engine serial record. The retained information is valuable when the same distributor later receives an inquiry from another machine brand using a Teledyne-Continental engine.

• Use neutral cartons for mixed, low-volume rebuild demand.

• Keep the complete reference and lot visible on the label.

• Review customer branding only after annual usage is defined.

Elecdura can plan a trial or scheduled supply around the quantity, destination and repair timetable provided by the buyer.

The video presents Elecdura starter-motor assembly and electrical testing. Share the Continental engine plate, complete 128000-1780 family number, old-unit photographs, order quantity and destination so the commercial response can cover the correct two-hole starter and supply terms.

128000-1780 Starter Motor Wholesale FAQ

Which engine information is needed for 128000-1780?

Provide the Teledyne-Continental engine model, serial number and any machine or generator information available. Add the complete old starter label and clear face, pinion and terminal photographs. If the engine was repowered, show installation clearance and cable routing. These details let Elecdura match the starter to the actual engine rather than relying on an outdated equipment badge.

How should the 128000-3030 reference family be used?

128000-3030, 128000-3031 and 128000-3032 are useful cross-reference leads alongside 128000-1781 and 128000-1782. Preserve the suffix found on the removed unit and check the two-hole nose and terminals. Reference-family membership supports the search, but the specified 12V, 2.5kW, 10T clockwise configuration and geometry must still be confirmed.

Can 17385N support a 128000-1780 wholesale inquiry?

Yes, 17385N can help connect aftermarket purchasing records to the product family. Keep both numbers in the inquiry when possible and provide the engine and physical starter evidence. The 17385N reference alone is insufficient when the old unit has a different face, pinion or terminal layout, because industrial rebuild records may contain superseded or reused numbers.

What mounting geometry should an engine rebuilder measure?

Check two Ø11 mounting holes on the Ø127 circle, the 89 mm engagement reference and the 20 mm distance to the drive gear. Photograph the face squarely and measure the removed starter with appropriate tools. Together with the ten-tooth drive, these points create a repeatable inspection method for rebuilders handling engines installed in different equipment.

Why does a repowered machine need extra fitment photographs?

A repower can change cable length, terminal access and nearby frame clearance even when the engine itself is known. Photograph the installed starter area, cable routes and mounting face before removing the old unit. Elecdura can then consider both the engine reference and the real installation, helping the buyer avoid a correct engine-family starter that is impractical in the converted machine.

What should be verified after installing this Continental starter?

Confirm full mounting-face seating, free cable clearance, correct terminal connection and smooth pinion engagement. Record cranking voltage and listen for prompt release after the engine starts. Save the engine serial, photographs and shipment lot. If performance is poor, inspect batteries, grounds, cables and ring gear before treating the new starter as the only possible cause.

How should industrial distributors inspect incoming cartons?

Compare complete labels, ten-tooth pinions, two-hole castings, terminal protection and packing condition against the retained engine record. For a pallet order, sample more than one location; for a small rebuild order, open every carton. Quarantine any unit with another voltage, nose or drive before it is assigned to a time-sensitive engine rebuild.

What details allow Elecdura to price 128000-1780 efficiently?

Send the complete reference, engine identity, quantity, destination and required date, plus old-unit and installation photographs. State whether the order needs neutral cartons, account labels or phased delivery. This gives Elecdura enough technical and commercial context to quote one defined starter and realistic logistics without repeated questions about the application.

Request a 128000-1780 Starter Motor Wholesale Quote

Send 128000-1780 or the complete related number, Teledyne-Continental engine model and serial, old-unit label, mounting, pinion and terminal photographs, quantity and delivery country. Elecdura will quote the 12V 2.5kW 10T CW unit with dimensional checkpoints and wholesale terms.

If the engine has been repowered into another machine, include photographs of the installed clearance and cable routing. This helps the response address the actual engine installation rather than assuming the machine badge still defines the starter.