300516-00054B Daewoo Starter Motor 24V 6.0kW 11T

300516-00054B Construction Equipment Starter Motor for DAEWOO DL08 (DX340LC-9C)

For aftermarket wholesalers opening a first bulk order, 300516-00054B is an aftermarket construction equipment starter motor for DAEWOO DL08 (DX340LC-9C). Its 24V system, 6.0kW output and 11T pinion give construction-equipment parts distributors, importers and fleet suppliers a clear product definition for OE-reference replacement and repeat-order sourcing.

For sourcing managers requesting production pricing, this page is designed to support a distributor decision: identify the correct replacement, confirm the key specification, define packaging and inspection needs, and request one consistent quotation for the required quantity.

300516-00054B Starter Motor Specifications and Technical Drawing

For maintenance suppliers confirming electrical ratings, the key version difference is the mounting and housing clocking. Compare 105°, 52.5° and 3×Ø13 with the existing starter so the pinion alignment and cable access remain correct.

For equipment-parts dealers checking repeat-order specifications, the source-faithful technical drawing records the available mounting information for 300516-00054B, including 3×Ø13, Ø105, Ø140, 105°, 52.5°; use the printed values together with the product views because the drawing supports comparison and should not be scaled from the screen.

300516-00054B Aftermarket Replacement and Application

For application specialists evaluating a direct replacement, match 300516-00054B to DAEWOO DL08 (DX340LC-9C) and keep the related numbers 300516-00054B on the same enquiry. If the old unit carries another suffix, flange, drive or terminal arrangement, quote it separately until the physical version is confirmed.

For replacement-parts sellers comparing the flange and terminals, product photos and the stated specifications should be reviewed together. If the old starter uses another pinion, mounting face or rear connection, keep that configuration on a separate RFQ until it is identified.

300516-00054B Wholesale Supply for Distributors and Importers

For warehouse planners planning mixed-model inventory, Elecdura supplies 300516-00054B for wholesale and distributor orders with a standard MOQ of 20 pcs, an indicative 7–15 day lead time after order confirmation and an 18-month warranty under agreed terms. Neutral packaging and private-label review are available for qualified programs.

For importers updating a customer item master, define the reference group, accepted product version, inspection request and packaging standard before production. Those records help both sides manage replenishment and resolve any receiving question efficiently.

300516-00054B Starter Motor Buyer FAQ

What evidence best identifies 300516-00054B carton identification for repeatable sourcing?

For engine-parts specialists confirming commercial terms, ask that unit and carton labels repeat the agreed reference, 24V, 6.0kW and 11T where the packaging format permits. Add the customer's barcode and destination marks before production. Clear identification allows distributors to receive, bin and pick this version without opening packaging or relying on a generic starter description.

Which comparison prevents a mismatch for 11T and module 4.233 when preparing a product enquiry?

For fleet-parts buyers reviewing a replacement proposal, the supplied drive uses 11 teeth with module 4.233. Count the old pinion teeth and compare outside diameter, rest position and engagement depth before stock is committed. The 4.233 module is part of the gear definition, so another pitch must not be combined on the shared order line. This check protects the ring gear from an incorrect mesh.

Which comparison prevents a mismatch for 300516-00054B ring-gear engagement before an installation slot is booked?

For technical sales teams confirming the stated application, review the 11T pinion, module 4.233, rest position and available axial dimensions as one engagement set. Inspect the ring gear for wear before fitting. A correct bolt pattern cannot protect the gear if pitch or projection differs, so drive geometry should be resolved before the starter is energized.

How should a distributor confirm 300516-00054B solenoid and cable routing before an installation slot is booked?

For fitment reviewers checking version-defining data, use the side and rear photographs of 300516-00054B to check solenoid position, battery-stud direction and start-terminal access in DAEWOO DL08 (DX340LC-9C). Cables should reach without stretching, sharp bends or contact with hot and moving parts. If the customer's old unit is clocked differently, request an installed photo before the order is assigned.

Which comparison prevents a mismatch for DAEWOO DL08 (DX340LC-9C) cranking condition when several versions look alike?

For application specialists confirming electrical ratings, before replacing the starter on DAEWOO DL08 (DX340LC-9C), test battery state, voltage drop across positive and ground paths, the start signal and ring-gear condition. Note cranking voltage and any abnormal noise. Those observations help distinguish a supply-circuit or engine-load problem from a fault in the 24V, 6.0kW starter and make a fitment request easier to resolve.

Which comparison prevents a mismatch for 3×Ø13, Ø105, Ø140, 105° and 52.5° for a documented fitment decision?

For replacement-parts sellers checking repeat-order specifications, use the supplied technical drawing to compare 3×Ø13, Ø105, Ø140, 105° and 52.5°. Take each measurement from the same face shown or described, then compare the locating shoulder, bolt pattern and drive-end projection as one set. A single matching diameter is not enough if the hole pattern or axial reach places the pinion differently.

What should purchasing verify first for 300516-00054B locating face when confirming the quoted item?

For service-parts networks matching the original unit in hand, the 300516-00054B flange should sit flat against the DAEWOO DL08 (DX340LC-9C) mounting surface without being pulled into place by the bolts. Clean both faces and compare the locating shoulder, hole pattern and any stated diameters. Rocking, a visible gap or bolt misalignment indicates that the version check is incomplete and installation should stop.

How can a buyer screen 300516-00054B terminal access when confirming the quote position?

For importers reviewing drive-end geometry, compare the rear housing and terminal direction in the approved product views for 300516-00054B. The battery cable and start-signal lead must reach without sharp bends, rubbing or contact with hot and moving parts. If the body can be clocked differently within the same reference family, confirm the actual terminal position before stock is committed to the order.

Request a Wholesale Quote for 300516-00054B Construction Equipment Starter Motor

For inventory buyers preparing a volume quote, to source 300516-00054B for a distributor or importer program, send the OE group, DAEWOO DL08 (DX340LC-9C), planned volume and destination. Elecdura will confirm the quoted starter configuration, commercial terms and available inspection support.