90032414 Cummins ISB6.7 24V 4.8kW 11T Starter Motor Wholesale

90032414 Cummins ISB6.7 11T Starter Motor for Distributors

Medium-duty fleet suppliers may search by 90032414, 428000-5120 or 19120. A useful request states the full 24V 4.8kW 11T requirement and includes the ISB6.7 engine and removed unit, keeping the product definition clear from the first reply.

The 428000-5120 reference family is widely circulated, so a number-only order is risky. Confirm the stated 24V system, 4.8kW output, 11T module-3 pinion, two Ø11 holes and terminal arrangement as one complete comparison.

90032414 24V 4.8kW Starter Motor Ratings and Dimensions

This product uses 24V, 4.8kW, 11T, module 3 and clockwise rotation. Buyers should repeat the entire set on the RFQ and purchase order; separating the reference from the electrical rating can connect it to a different market version.

90032414 Cummins ISB6.7 11T Starter Motor Dimensions — compare the drawing with the removed starter before placing a volume order.

The drawing identifies two Ø11 holes, an Ø127 face, an Ø89 locating diameter and 47 mm and 18 mm side references. Photograph the flange parallel to the camera and keep the cable side visible so receiving can repeat the comparison.

90032414 and 428000-5120 Reference Matching for Buyers

90032414, 19120, 115564 and Denso 428000-5120, -5121 and -5122 form the main search group, with several KRAUF and Prestolite numbers as additional cross references. Keep the selected number beside 24V 4.8kW 11T on every order.

For buses, trucks or terminal equipment using an ISB6.7 engine, capture the vehicle or equipment identity and old-starter rating before assigning this line. Only units matching the complete 11T two-ear product should be combined for fleet stock.

90032414 Starter Supply Support for Medium-Duty Fleets

Incoming inspection should verify the 11T pinion, two-ear face, locating surface and protected terminals. A carton description showing 90032414 and the full 24V 4.8kW 11T rating gives branches a clearer issue point than the cross reference alone.

The Elecdura video below introduces starter assembly and electrical testing for export orders. Medium-duty fleet suppliers can review production capability while agreeing on first-lot sampling, carton wording, shipment frequency and destination planning.

90032414 Starter Motor FAQs for B2B Buyers

Why must the full 90032414 electrical rating stay on the enquiry?

This product is defined as 24V, 4.8kW, 11T, module 3 and clockwise rotation. Send that complete set with 90032414 rather than the reference alone. Keeping the rating, pinion and two-ear photographs together gives purchasing and Elecdura one clear product definition and reduces the risk of selecting another version from the widely used reference family.

How are 90032414 and 428000-5120 used together?

90032414 can be the primary Cummins number, while 428000-5120, -5121 and -5122, 19120 and 115564 provide supporting search references. Write the complete Denso suffix where available and keep 24V 4.8kW 11T beside it. The number relationship helps identification but does not replace the physical and electrical comparison.

What should buyers verify on the 90032414 pinion?

Count eleven teeth, confirm module 3 and clockwise rotation, and compare the pinion diameter and wear pattern with the removed starter. Keep these drive details beside the 24V 4.8kW rating. A similar housing or an ISB6.7 description alone cannot show whether the tooth form suits the buyer's ring gear.

Which flange dimensions matter for the 90032414 starter?

Check the two Ø11 mounting holes, the Ø127 face, Ø89 locating diameter and the 47 mm and 18 mm side references. Take a centered front photograph and a side view showing all terminals. These dimensions help confirm the compact two-ear product and give destination receiving a repeatable inspection reference.

What host-equipment information helps with this ISB6.7 starter?

Provide the bus, truck or terminal-equipment maker and model, engine details, system voltage and every old-starter marking. Add clear mounting and terminal photographs. This information keeps 90032414 tied to the buyer's medium-duty installation and helps branch demand remain visible when several ISB6.7 vehicles share one purchasing program.

What should receiving record for the first 90032414 lot?

Record the full 24V 4.8kW 11T identity, then inspect samples for pinion count, two-ear geometry, locating-surface condition and terminal protection. Compare more than one carton with the confirmed images and save the findings by shipment lot. This gives later deliveries and after-sales reviews a consistent 90032414 reference.

Which checks should precede replacement of a 90032414 starter?

Test the 24V battery bank under load, measure positive and ground voltage drop during cranking and verify the start-signal circuit. Inspect the ring gear where access allows. Relate those readings to the ISB6.7 host and the full 90032414 product rating so cables, batteries and mechanical damage are not mistaken for a starter fault.

What belongs in a 90032414 wholesale quotation request?

Email the Cummins ISB6.7 engine and host equipment, full 90032414 or 428000-5120 marking, rating label, pinion, mounting and terminal photographs, quantity, destination and packing needs. Elecdura can compare the stated 24V 4.8kW 11T product and reply with matching feedback, wholesale pricing, lead time and shipment options.

Request 90032414 Cummins Wholesale Pricing by Email

Send the Cummins ISB6.7 engine and host equipment details, complete 90032414 or 428000-5120 marking, clear rating label, pinion, mounting and terminal photographs, quantity and destination to info@elecdurauto.com. Elecdura will review the stated 24V 4.8kW 11T product and provide wholesale terms.