10PA15C 12V PV4 130 mm Heavy-Duty A/C Compressor for Doosan 90-9C excavator

Fleet Replacement 10PA15C A/C Compressor for Doosan 90-9C excavator

A stopped Doosan 90-9C excavator machine is expensive, so the compressor must arrive ready for the exact belt, hose and mounting layout. This complete aftermarket 10PA15C A/C compressor is supplied for compact-equipment fleet stock and workshop replacement. The page keeps PV4 130 mm 12V clutch together with the 12V, PV4 and 130 mm drive on the receiving note, giving the fleet parts team one coherent product identity.

This page supports buyers planning seasonal service demand for Doosan 90-9C excavator. Keeping 12V, PV4 and 130 mm beside the application makes the offer easier to approve, gives receiving a usable reference and limits the chance of installation delays.

Doosan 90-9C excavator A/C Compressor Data for Fleet Buyers

This 10PA15C compressor is quoted as a complete assembly, keeping the drive, electrical and mounting description on one receiving note. If the workshop requires an unlisted oil or refrigerant quantity, the correct source is the approved Doosan 90-9C excavator service procedure rather than a neighboring product page.

Importer Photo Review for This 10PA15C A/C Compressor

A good approval set answers four physical questions: how the belt meets the clutch, where the connector sits, which way the ports face and how the compressor bolts to Doosan 90-9C excavator. The fitment photographs should make each answer visible without a collage.

The decisive step is to verify four ribs, 12V coil, pulley diameter and hose-block orientation. Keep the PV4 drive and 12V clutch consistent with this entry even when another 10PA15C unit has a familiar casting.

Distributor Stock Separation for This 10PA15C A/C Compressor

Keep it separate from the single-A 90-9C line. Keep that distinction in the receiving note instead of depending on memory. A nearby 10PA15C assembly can share the housing outline while changing the belt, voltage or hose position.

Alternative references can be useful for search, but they should lead back to the approved physical build; the fleet parts team still needs the clutch, head and mounting evidence before merging any stock lines.

Distributor Receiving and Service Notes for This A/C Compressor

Before this compressor is binned, compare its clutch and connection side with the approved Doosan 90-9C excavator view; record any carton damage, bent connector, pulley contact or disturbed port cap and isolate the unit if the finding affects saleable condition.

After fitment is confirmed, the technician still needs the approved Doosan 90-9C excavator service method; that includes correcting the original cause of failure and applying the specified oil balance, evacuation and refrigerant procedure for the vehicle or machine.

Distributor RFQ Details for This 10PA15C A/C Compressor

Elecdura supports wholesale enquiries for this 12V, PV4 and 130 mm compressor, from initial evaluation to planned seasonal service demand. Neutral or private-label presentation is available for suitable programs once the Doosan 90-9C excavator fitment has been approved.

The shortest route to an accurate quote is a complete line: Doosan 90-9C excavator, 10PA15C, 12V, PV4 and 130 mm, quantity and destination; attach clutch, head, connector and mounting views for the supplier's comparison.

Distributor FAQ for the Doosan 90-9C excavator A/C Compressor

The following points are intended for wholesale buyers comparing the old unit, the offered compressor and the commercial supply plan.

Why must the PV4 130 mm clutch stay on the RFQ?

A compressor body may accept several clutch builds, but the vehicle or machine belt path does not; that buyer should retain this pulley description through quotation and packing.

Can this Doosan 90-9C excavator compressor use private-label packing?

Neutral cartons and buyer-brand labels can be discussed for qualified Doosan 90-9C excavator bulk programs. The physical product is approved before artwork or marking details.

What should a wholesale RFQ include for this 10PA15C compressor?

For the 12V, PV4 and 130 mm 10PA15C build used on Doosan 90-9C excavator, send the approved receiving note, expected order quantity and receiving country; first-time enquiries should also include clear clutch, port and mounting photographs.

Is the 10PA15C family number enough to confirm fitment?

No. A 10PA15C name narrows the search but does not settle the Doosan 90-9C excavator fitment; the clutch, voltage, ports, electrical connection and feet remain part of the decision.

What wrong-stock risk applies to this PV4 10PA15C compressor?

Keep it separate from the single-A 90-9C line. Recording that boundary helps the fleet parts team avoid installation delays during repeat supply.

Which photos help confirm this Doosan 90-9C excavator compressor?

Photograph the old 10PA15C unit before and after removal. Those images should reveal belt alignment, port direction, connector position and the way it mounts to Doosan 90-9C excavator.

What receiving checks apply to this PV4 10PA15C compressor?

Match the delivered 10PA15C compressor with the approved image and receiving note; check the clutch and exposed mounting points for transit contact before binning.

What identifies this Doosan 90-9C excavator A/C compressor?

Start with Doosan 90-9C excavator and 10PA15C; finish the identification with 12V, PV4 and 130 mm and the visible head and mounting layout; this keeps a similar compressor from inheriting the order by name alone.

Request a Wholesale 10PA15C A/C Compressor Quote

Send Elecdura the required quantity, destination and packing plan with the old-unit label and separate installation views; we will compare Doosan 90-9C excavator, 12V, PV4 and 130 mm, the connector, head and mounting layout before preparing the quotation. Once the physical match is accepted, the same receiving note can support purchasing, receiving and future distributor replenishment.