ELECDURA NETWORK
Your Whole New Supply Chain For Heavy-Duty Parts
Whatsapp：
+86 18915027366
Phone：
+86 18915027366
10461416
10461416
Elecdura
Available for qualified orders
20 pcs
7 - 15 Days
Neutral packaging / private-label review
18 Months
10461416
Caterpillar 910; 12V, 4.6kW, 10T, 40 mm pinion reference
Confirm mounting type, 10T drive, 40 mm reference and solenoid position, 12V, 4.6kW, solenoid position and terminal layout against the removed starter before volume supply.
| Quantity: | |
|---|---|
10461416 Caterpillar 910 Starter Motor Wholesale Supply gives B2B teams a defined Caterpillar 910 line for sample, wholesale and replenishment enquiries. The listed 12V, 4.6kW, 10T configuration covers Caterpillar 910 loader service with a 12V specification that should not be mixed with 24V construction starters. Buyers can keep the complete reference and application together when requesting price, packing and delivery terms.
When asking for price, identify the Caterpillar 910 model or engine as precisely as possible and keep 10461416 unshortened. State order quantity, destination and timing, then attach front, side and terminal views of the removed unit so commercial terms can be connected to the correct physical starter.
| Primary order identity | 10461416 |
| Target application | Caterpillar 910 |
| Starter design | Delco-type heavy-duty replacement |
| System voltage | 12V |
| Rated output | 4.6kW |
| Pinion identification | 10T / 40 mm reference |
| OE / reference group | 10461416 |
| Wholesale terms | MOQ 20 pcs / normally 7–15 days after order confirmation |
| Warranty | 18 months under agreed sales terms |
Ask the workshop to photograph mounting type, 10T drive, 40 mm reference and solenoid position without perspective distortion. The same photo set should show the mounting register and the pinion position relative to the flange; these points determine whether a starter that looks similar can actually seat and engage correctly.
The 4.6kW output and 10T drive belong together with 12V. Record all three rather than quoting power alone, and include a terminal-side photograph so the B+ cable, control wire and nearby clearances can be reviewed before shipment.
10461416 should remain the lead reference for this Caterpillar 910 line. Cross-references are useful for discovery, but the buyer should accept them only after the 12V, 4.6kW, 10T, mounting and terminal details agree with the removed starter.
For this wheel-loader requirement, purchasing teams should help loader-parts distributors quote branch stock and workshop demand on one clear line. Keep the confirmed Caterpillar 910 details, product photographs and received lot beside the item record so a later order can be compared with the same physical and commercial reference.
The wholesale offer is built around confirmed product identity, quantity and destination. Standard orders begin at 20 pieces, preparation is normally 7–15 days, and the 18-month warranty follows the agreed sales terms; export packing and label needs are stated before production or allocation.
Branch coverage, supported machine count and normal lead time are more useful than a broad annual estimate. Share those figures for Caterpillar 910 so inventory can reflect both routine consumption and the consequences of an unexpected no-start event.
The video below introduces Elecdura starter-motor production and electrical testing for B2B supply. Buyers can review factory capability while using the 10461416 application and specification shown above for their own product comparison.
No. Tooth count is only one control. The locating face, mounting pattern, pinion reach, 40 mm reference, solenoid position, terminals and 12V system must also agree with the removed starter. Review the full set before a sample or bulk order is accepted. Apply the result to the 10461416 Caterpillar 910 line rather than an unrelated starter family.
Tell Elecdura the quantity, destination, required arrival date and whether the demand supports an urgent repair, normal replenishment or a planned project. Normal preparation is 7–15 days after confirmation, but freight and packing choices depend on the actual schedule and shipment size. This keeps the check specific to 10461416, not the general housing family.
Send the complete 10461416 reference, Caterpillar 910 details, quantity, destination and required date. Add clear front, side and terminal photographs of the removed starter. This gives Elecdura enough information to discuss the intended 12V 4.6kW 10T unit, packing, lead time and freight in one focused offer. Apply the result to the 10461416 Caterpillar 910 line rather than an unrelated starter family.
Clean the old unit enough to expose the label, mounting face and terminals, then photograph it square to the flange, from the side and from the terminal end. Include a ruler for key dimensions where practical. Avoid wide-angle close-ups that distort ear spacing or pinion position. Use the same 10461416 record when the next Caterpillar 910 order is raised.
Confirm carton count, labels and visible condition before sampling. On selected units, compare the pinion, mounting face, solenoid and terminals with the confirmed record. Isolate any damaged or different unit with carton and lot photographs before the remainder is released to normal Caterpillar 910 inventory. Apply the result to the 10461416 Caterpillar 910 line rather than an unrelated starter family.
Use the full reference, Caterpillar 910 application and core specification on the internal item label. Store the confirmed product photographs with the ERP record and avoid abbreviating the number. Receiving staff can then compare each new lot with the same documented configuration before distributing it to branches. Apply the result to the 10461416 Caterpillar 910 line rather than an unrelated starter family.
Check the machine electrical system, old-starter label and service record before ordering. Keep 4.6kW, 10T and the terminal arrangement in the same comparison. A starter can have a similar flange but the wrong voltage, output or cable layout, so these facts should be confirmed together. Record the 10461416 outcome beside the Caterpillar 910 application and received lot.
Provide the invoice or lot reference, installation date, Caterpillar 910 details, service time and a clear description of the symptom. Include photographs of the flange, drive and terminals plus battery and voltage-drop results. Keep the unit assembled until Elecdura confirms the next step under the agreed terms. Record the 10461416 outcome beside the Caterpillar 910 application and received lot.
Email info@elecdurauto.com with 10461416, Caterpillar 910 details, old-unit photographs, quantity, delivery country and required date. Elecdura will reply with the matching 12V 4.6kW 10T offer, availability, packing, lead time and freight options.
