26201-7070D Daewoo Starter Motor 24V 6.0kW 11T

26201-7070D Construction Equipment Starter Motor for DAEWOO 215-9 excavator (small-pinion version)

For sourcing managers building a new starter range, Elecdura offers 26201-7070D as an aftermarket construction equipment starter motor for DAEWOO 215-9 excavator (small-pinion version). The 24V, 6.0kW and 11T configuration is intended for professional replacement sourcing by construction-equipment parts distributors, importers and fleet suppliers.

For wholesale program managers requesting production pricing, distributors can quote the exact application and starter configuration without turning the page into a generic component guide. Elecdura can also review customer labels, carton requirements and inspection documents for planned orders.

26201-7070D Starter Motor Specifications and Technical Drawing

For equipment-parts dealers confirming electrical ratings, the product identity combines 26201-7070D, DAEWOO 215-9 excavator (small-pinion version), 24V, 6.0kW and 11T. Keeping those facts together helps buyers separate this starter from adjacent versions.

For purchasing teams checking repeat-order specifications, the source-faithful technical drawing records the available mounting information for 26201-7070D, including 3×Ø11, 50±1 mm; use the printed values together with the product views because the drawing supports comparison and should not be scaled from the screen.

26201-7070D Aftermarket Replacement and Application

For replacement-parts sellers evaluating a direct replacement, DAEWOO 215-9 excavator (small-pinion version) is the stated application for 26201-7070D. Buyers comparing 26201-7070D should confirm that the existing starter shares the same 24V system, 6.0kW output and 11T drive before adding the item to a distributor order.

For service-parts networks comparing the flange and terminals, the existing starter should agree with the approved drive-end, side and rear views. Confirm the 11T pinion and module 3, then keep any different flange or terminal layout outside the current priced item.

26201-7070D Wholesale Supply for Distributors and Importers

For importers planning mixed-model inventory, Elecdura supports repeat-order and new-line sourcing for 26201-7070D. Commercial planning can cover a 20 pcs MOQ, 7–15 day lead time subject to confirmation, neutral packaging or private-label review, and an 18-month agreed warranty.

For inventory buyers confirming an incoming batch, batch consistency should be controlled through the agreed reference, electrical rating, pinion, packaging and inspection points. Elecdura can discuss test documentation and pre-shipment photos that match the needs of the distributor or importer.

26201-7070D Starter Motor Buyer FAQ

Which specification deserves priority for DAEWOO 215-9 excavator (small-pinion version) cranking condition when several versions look alike?

For fleet-parts buyers comparing the flange and terminals, before replacing the starter on DAEWOO 215-9 excavator (small-pinion version), test battery state, voltage drop across positive and ground paths, the start signal and ring-gear condition. Note cranking voltage and any abnormal noise. Those observations help distinguish a supply-circuit or engine-load problem from a fault in the 24V, 6.0kW starter and make a technical RFQ easier to resolve.

How can an importer validate module 3 for repeatable sourcing?

For technical sales teams reviewing a replacement proposal, module 3 is part of the gear geometry for 26201-7070D. Confirm it together with the 11-tooth count and pinion diameter; another module changes tooth pitch even when the number of teeth is unchanged. The old starter or ring-gear specification should therefore support the module match before a substitute is accepted.

Which specification deserves priority for 26201-7070D order testing when several versions look alike?

For sourcing managers confirming an incoming batch, Elecdura can discuss armature, solenoid, no-load and load testing for 26201-7070D. State the required report format, sampling expectation and acceptance points in the RFQ. Testing should use the stated 24V and 6.0kW configuration, while identity and mounting checks remain separate because electrical results do not prove physical interchangeability.

What should purchasing verify first for 26201-7070D drive-end photograph before an installation slot is booked?

For application specialists checking version-defining data, the drive-end image for 26201-7070D should be used to count 11 teeth and compare the flange, locating shoulder and pinion rest position. Use the same viewing angle when recording the unit taken from service. A side view alone may hide the deciding tooth and mounting information, so keep the direct drive-end view with the RFQ.

Which detail separates 26201-7070D replenishment during an application review?

For sales teams planning a repeat order, keep 26201-7070D, 24V, 6.0kW, 11T, the application description and the agreed packaging on the same replenishment line. Add dated photos when the equipment fleet changes or a different original unit in hand appears. This gives purchasing and warehouse teams enough detail to avoid silently merging a new version into established stock.

Which specification deserves priority for 11T and module 3 when preparing a fitment check?

For service-parts networks checking repeat-order specifications, the supplied drive uses 11 teeth with module 3. Count the old pinion teeth and compare outside diameter, rest position and engagement depth prior to purchase. The 3 module is part of the gear definition, so another pitch must not be combined on the one stock line. This check protects the ring gear from an incorrect mesh.

What should purchasing verify first for DAEWOO 215-9 excavator (small-pinion version) production changes before an installation slot is booked?

For importers matching the existing starter, DAEWOO 215-9 excavator (small-pinion version) may appear across equipment years or engine revisions, so the application name is an entry point rather than the sole proof of fitment. Match 26201-7070D, 24V, 6.0kW and 11T to the starter removed from the machine. A changed suffix, flange or terminal layout should open a separate review for that machine.

Which specification deserves priority for 26201-7070D ring-gear engagement before an installation slot is booked?

For product managers checking application evidence, review the 11T pinion, module 3, rest position and available axial dimensions as one engagement set. Inspect the ring gear for wear before fitting. A correct bolt pattern cannot protect the gear if pitch or projection differs, so drive geometry should be resolved before the starter is energized.

Request a Wholesale Quote for 26201-7070D Construction Equipment Starter Motor

For fleet-parts buyers preparing a volume quote, ask for a quote on 26201-7070D with the full DAEWOO 215-9 excavator (small-pinion version) record, quantity and packaging plan. We will verify the requested 24V, 6.0kW and 11T configuration and return the relevant wholesale terms.