128000-7600 Volvo F610 11T Starter Motor B2B 47mm

128000-7600 Volvo F610 47mm Starter Motor B2B Value

Electrical rebuilders and commercial-vehicle distributors need more than an OE match when two products serve the same F610 TD60C application. The three-hole drive end and 47 mm position give workshops a measurable basis for selecting this product before a purchase order is issued.

An 11T count and Volvo reference alone do not distinguish this version from MDN534. Compare all three mounting holes, the drive-end outline, side length and terminal arrangement; otherwise a valid cross reference can still lead to a unit that does not seat like the removed starter.

128000-7600 Volvo 11T Three-Hole Starter Motor Dimensions

The specified combination remains 24V, 4.5kW, 11T, module 3 and clockwise rotation. Purchasing should add the three-hole Ø11.5 face and 47 mm axial reference so the technical and commercial descriptions identify one physical product.

128000-7600 47mm Drive Starter Dimensions for Volvo F610 B2B Orders — compare the drawing with the removed starter before placing a volume order.

Measure three Ø11.5 holes on the Ø127 reference circle, the Ø89 locating diameter and the 47 mm drive position. A square flange photograph is important because the third hole and slight axial difference are easy to miss in angled marketplace images.

128000-7600 Volvo F610 Starter Motor Version Identification

The number group contains 128000-7600, 128000-7601, 128000-7602, 1676822, 420760, STB1443MN and 19789N. These references support searchability, but the quotation should display 47 mm and three-hole geometry beside the Volvo F610 TD60C application.

Rebuilders can use the removed nose housing or a trusted old unit as the comparison baseline. Once the three-hole pattern and terminal side agree, save those photographs against the item so later branch orders do not fall back to OE-only selection.

128000-7600 Volvo Starter Motor Rebuilder and Supply Support

On arrival, inspect the three mounting holes, 11T pinion, locating face and solenoid connections before accepting the lot into stock. Keep this version in a separate bin from the two-hole 11T and 9T products, with 47 mm visible on the warehouse label.

The Elecdura video shows starter-motor production and electrical testing for international orders. Buyers can use it when reviewing factory capability, quality sampling and packaging while keeping the three-hole 47 mm Volvo configuration visible in technical communication.

128000-7600 Starter Motor FAQs for B2B Buyers

What makes this 128000-7600 F610 product a separate 11T version?

The technical drawing shows three Ø11.5 mounting holes and a 47 mm drive reference, while the adjacent MDN534 unit uses two Ø11 holes and 48 mm. Those physical differences justify a separate product even though the OE, TD60C application and 11T count overlap. Buyers should send a square flange view before using this product line.

How should the 47 mm drive position be checked?

Place a straightedge across the mounting face and measure to the stated drive reference, then compare the Ø89 locating diameter and Ø127 hole circle. Include a side photograph with the measuring points visible. A one-millimetre difference should not be ignored when another product in the same OE family uses a different housing and axial dimension.

Which photograph is most useful for the three-hole Volvo starter?

Take a front photograph with the camera centred and parallel to the mounting face so all three holes are visible at the same scale. Add a side and terminal view. Angled marketplace images can hide the third hole or change apparent spacing, while a square image gives Elecdura a better basis for comparing the MDN554 geometry.

How can a starter rebuilder compare the MDN554 housing?

Set the removed starter beside the quoted unit and compare the nose housing, three mounting points, 11T pinion, solenoid clocking and cable side from matching angles. Record the 47 mm drive position. This side-by-side method gives rebuilders more useful information than matching armature size or housing colour alone.

What should appear in the distributor product record for this version?

Use a distinct item name that includes Volvo F610 TD60C, 11T and 47 mm, then attach the accepted three-hole flange and terminal images. Keep the complete OE group for search. This makes the record searchable without allowing the shared 128000-7600 reference to merge the product with the two-hole or 9T alternatives.

What should receiving verify before shelving the 47 mm product?

Open the agreed sample quantity and compare all three holes, the 11T pinion, Ø89 locating face and terminal arrangement with the accepted images. Confirm 47 mm on the item label and record the delivery lot. Keep cartons away from the two-hole 11T product until receiving has completed the physical comparison.

How should several 128000-7600 Volvo versions share one shipment?

Pack the two-hole 11T, three-hole 47 mm 11T, 9T and 13T versions in separately marked cartons and group them by item on the pallet. The packing list should show individual quantities and carton ranges. Shared outer labels are unsuitable because destination staff would otherwise need to open boxes to identify each configuration.

What does Elecdura need to quote the three-hole 47 mm unit?

Send square front, side and terminal photographs of the removed F610 TD60C starter, the complete reference group, measured hole and axial details, required quantity, annual forecast and destination. Elecdura will compare the three-hole 47 mm product and return matching feedback, B2B pricing, lead time, packing options and delivery terms.

Request 128000-7600 Volvo F610 47mm Starter Motor Pricing

Email clear front, side and terminal views of the Volvo F610 TD60C starter, the complete OE group, measured hole and drive references, quantity, annual demand and destination to info@elecdurauto.com. Elecdura will compare the 47 mm three-hole product and return a B2B quotation.