5811001280 Isuzu 4BC2 9T Starter Motor Wholesale

5811001280 Starter Motor Wholesale for Isuzu 4BC2 Applications

Isuzu truck-parts distributors and Hitachi equipment suppliers can use 5811001280 to identify the 24V, 4.5kW, 9T CW starter required for a defined 4BC2 application. The nine-tooth drive is an important distinction from visually similar units sold for the same engine family.

For a useful quotation, send the machine or truck model, complete removed-unit number, clear mounting-face and terminal-side photographs, order quantity and destination. These details let Elecdura price the specified unit, packing and delivery plan without broadening the offer to an unverified substitute.

5811001280 9T Starter Motor Specifications and Mounting Dimensions

5811001280 Isuzu 4BC2 24V 4.5kW 9T starter mounting dimensions.

Compare the removed starter with the two Ø13 mounting holes, Ø120 mounting circle and Ø95 locating reference shown in the drawing. The 18 mm and 16 mm axial references help confirm how the drive end sits relative to the mounting face.

Also count the 9T pinion and confirm module 3, CW rotation and terminal orientation. A similar housing is not enough: a different pinion, mounting face or cable position should be quoted as a separate starter motor.

5811001280 Starter Motor OE Cross-References for Distributor Enquiries

1. Reference family: 5811001280, 5811001281, 5811001282, 8942549221, 8943205310, S24-03A, S24-13, S25-120, 18280, 18284, 19903 and 119131-77010 can help buyers locate the relevant product family.

2. Ordering boundary: Use the complete reference together with the 24V, 4.5kW, 9T CW specification, mounting geometry and terminal photographs. A cross-reference should begin the comparison, not replace confirmation of the physical unit.

5811001280 Starter Motor Wholesale Supply and Export Support

Elecdura supports distributor orders from 20 pieces, normally with a 7–15 day lead time after order confirmation and an 18-month warranty under agreed sales terms. Availability, packaging and delivery timing are confirmed against the requested quantity and destination.

Buyers can separate urgent service demand from routine replenishment in the same enquiry. This allows stock units, production quantities, carton markings and freight options to be planned around the actual branch or jobsite requirement.

The video introduces Elecdura starter-motor assembly and electrical testing. Product selection for 5811001280 remains based on the OE reference, 4BC2 application, 9T drive, mounting face and terminals described on this page.

5811001280 Starter Motor Questions from B2B Buyers

How can a buyer confirm 5811001280 fitment for an Isuzu 4BC2 application?

Start with the complete removed-unit number and the exact truck or equipment model. Compare the 9T pinion, two-hole mounting face, locating diameter and terminal position with the old starter. Clear front, side and terminal photographs are useful when the machine uses a related 4BC2 starter that looks similar but has a different drive end.

Can every listed cross-reference be ordered as the same 5811001280 starter motor?

The references identify a related product family, but the number alone should not decide the order. Confirm 24V, 4.5kW, 9T and CW rotation, then compare the mounting face and terminals. If any of those points differ, ask for a separate quotation rather than combining the units under one cross-reference list.

What electrical checks are useful before replacing the 5811001280 starter?

Load-test the batteries and measure voltage drop on the positive and ground circuits while cranking. Inspect cable lugs, grounding points and the start-control circuit before removing the starter. These checks help distinguish an actual motor fault from weak batteries, excessive cable resistance, poor grounding or another electrical problem.

Which mounting details should be compared with the 5811001280 drawing?

Compare the two Ø13 holes, Ø120 mounting circle, Ø95 locating reference and the 18 mm and 16 mm axial positions. Count the nine pinion teeth and check the terminal side at the same time. A straight mounting-face photograph makes these differences easier to review than an angled overall photo.

How should distributors plan stock for 5811001280 starter motors?

Separate scheduled truck-workshop replenishment from urgent equipment-service demand. Share recent usage, supported machine population, branch transfer time and desired reserve quantity for each service location. Elecdura can then distinguish stock requirements from production requirements and propose packing or staged delivery that fits the buyer’s actual supply schedule.

What should receiving teams inspect when a 5811001280 shipment arrives?

Check the carton and product labels against the purchase order, then sample the 9T pinion, two-hole face, locating diameter and terminal protection. Isolate any unit with shipping damage or a different physical configuration before it enters stock. Record the lot number and arrival photographs for traceability.

What information is needed for a 5811001280 wholesale quotation?

Send the complete OE number, truck or equipment model, 4BC2 engine details, removed-unit photographs, quantity and destination. Add the required arrival date, carton marking, payment preference and any staged-delivery request. This lets the quotation cover the correct starter, MOQ, availability, export packing, warranty and freight terms.

What information supports an after-sales review for this starter motor?

Provide the delivery lot, installation date, operating hours, fault description and clear photographs of the label, pinion, mounting face and terminals. Include battery and cable test results taken under cranking load. This information helps distinguish product condition from installation, vehicle electrical, application or transport-related causes.

Request 5811001280 Starter Motor Wholesale Pricing

Send the Isuzu or Hitachi equipment model, 4BC2 engine details, complete removed-unit number, mounting and terminal photographs, quantity, destination and required arrival date. Elecdura will respond with pricing for the specified 24V, 4.5kW, 9T CW starter motor together with MOQ, packing, lead time, warranty and freight options.