7H15 24V 8PK 133 mm Heavy-Duty A/C Compressor for Daewoo DX200-9CN excavator

Importer Guide to This 7H15 A/C Compressor

Downtime on Daewoo DX200-9CN excavator is expensive, so the compressor must arrive ready for the exact belt, hose and mounting layout. Supplied as a complete aftermarket compressor, this 7H15 unit combines 8PK 133 mm 24V 7H15 configuration. The receiving note retains 24V, 8PK and 133 mm with the application so purchasing and receiving are working from the same build.

The intended customer is a distributor or fleet buyer who needs the same configuration again, not a one-off generic reference for Daewoo DX200-9CN excavator with 24V, 8PK and 133 mm. Linking the Daewoo DX200-9CN excavator application to 24V, 8PK and 133 mm gives that buyer a record suitable for purchasing and later replenishment.

Distributor Specification Check for the 7H15 A/C Compressor

A distributor can copy the table directly into its receiving note, but the old unit still provides the final visual comparison. That matters because 7H15 compressors may share a body family while carrying a different clutch, voltage, connector or hose head for Daewoo DX200-9CN excavator.

Wholesale Mounting Review for This 7H15 A/C Compressor

If several 7H15 versions are present in the same fleet, mark the old compressor before it reaches the bench for Daewoo DX200-9CN excavator with 24V, 8PK and 133 mm. Photograph its installed position on Daewoo DX200-9CN excavator and keep the resulting angle shots with the specific receiving note.

Compare the pulley, clutch voltage, connector, suction and discharge ports and complete mounting geometry for Daewoo DX200-9CN excavator. This product-specific detail, together with 24V, 8PK and 133 mm, is what separates a useful fitment review from a generic 7H15 lookup.

Wholesale Variant Control for the Daewoo DX200-9CN excavator A/C Compressor

Keep nearby 7H15 versions with another voltage, pulley, port direction or mounting layout on separate stock lines for Daewoo DX200-9CN excavator. A buyer who records that boundary can discuss alternatives without allowing a similar housing to replace the agreed Daewoo DX200-9CN excavator configuration.

For mixed inventory, store the confirmed Daewoo DX200-9CN excavator image beside the full application and drive description. Receiving then has a quick visual reference and is less likely to combine two physical variants under a shortened stock name for Daewoo DX200-9CN excavator with 24V, 8PK and 133 mm.

Distributor Receiving and Service Notes for This A/C Compressor

A practical goods-in check starts with the receiving note and ends with the physical assembly. Match Daewoo DX200-9CN excavator and 24V, 8PK and 133 mm, inspect the mounting points, and photograph any discrepancy before stock is released.

Workshop preparation affects the life of this 7H15 assembly as much as the part choice for Daewoo DX200-9CN excavator with 24V, 8PK and 133 mm. The Daewoo DX200-9CN excavator system should be checked for contamination, leakage, belt alignment and airflow before charging and commissioning.

Bulk Daewoo DX200-9CN excavator A/C Compressor Supply for Distributors

Elecdura supports wholesale enquiries for this 24V, 8PK and 133 mm compressor, from initial evaluation to planned workshop replacement demand. Neutral or private-label presentation is available for suitable programs once the Daewoo DX200-9CN excavator fitment has been approved.

When requesting a sample, identify the target Daewoo DX200-9CN excavator or truck and the expected annual demand. The same Daewoo DX200-9CN excavator enquiry can state whether the buyer needs neutral packing, branded labels or consolidation with other compressor models, with 24V, 8PK and 133 mm retained on the stock record.

Wholesale 7H15 A/C Compressor Questions from Buyers

The questions below address the fitment and purchasing details most likely to affect a Daewoo DX200-9CN excavator wholesale order.

Can this Daewoo DX200-9CN excavator compressor use private-label packing?

Qualified programs may use buyer-brand labels or agreed cartons for Daewoo DX200-9CN excavator with 24V, 8PK and 133 mm. The Daewoo DX200-9CN excavator product record remains fixed so packaging cannot blur a variant difference.

Is the 7H15 family number enough to confirm fitment?

A matching 7H15 casting can still carry the wrong clutch or hose direction during the Daewoo DX200-9CN excavator 24V, 8PK and 133 mm review. Fitment is confirmed only when those physical details also match Daewoo DX200-9CN excavator.

What wrong-stock risk applies to this 8PK 7H15 compressor?

Keep nearby 7H15 versions with another voltage, pulley, port direction or mounting layout on separate stock lines for Daewoo DX200-9CN excavator. The distinction should remain visible from RFQ through receiving, even when both compressors share familiar castings in the Daewoo DX200-9CN excavator 24V, 8PK and 133 mm order.

What should a wholesale RFQ include for this 7H15 compressor?

Provide Daewoo DX200-9CN excavator, 24V, 8PK and 133 mm, quantity, destination and packing requirements. Include old-unit views that show the clutch, head, connector and mounts for Daewoo DX200-9CN excavator.

How should a buyer describe this 7H15 compressor?

The receiving note should carry Daewoo DX200-9CN excavator, 7H15, 24V, 8PK and 133 mm and a reference image. Together they give purchasing and receiving the same product definition for Daewoo DX200-9CN excavator with 24V, 8PK and 133 mm.

Why must the 8PK 133 mm clutch stay on the RFQ?

The 8PK 133 mm clutch defines how this compressor meets the Daewoo DX200-9CN excavator belt path. Changing it can turn a plausible unit into a non-fitting assembly for Daewoo DX200-9CN excavator with 24V, 8PK and 133 mm.

Why does port direction matter on this 7H15 compressor?

Hose routing has limited space around the Daewoo DX200-9CN excavator installation. The confirmed Daewoo DX200-9CN excavator product needs the connection side shown in the reference photographs, not merely a compatible body family, with 24V, 8PK and 133 mm retained on the stock record.

Which photos help confirm this Daewoo DX200-9CN excavator compressor?

Send the clutch face, port block, connector, both mounting sides and one Daewoo DX200-9CN excavator installed overview. Separate angles are easier to compare than a single collage during the Daewoo DX200-9CN excavator 24V, 8PK and 133 mm review.

Send an RFQ for This Daewoo DX200-9CN excavator A/C Compressor

For a wholesale quote, provide the Daewoo DX200-9CN excavator application, 7H15, 24V, 8PK and 133 mm, quantity and shipping country. Add the fitment photographs so Elecdura can review the visible fitment points before discussing delivery and packing. The reply can then keep the confirmed Daewoo DX200-9CN excavator configuration visible in pricing, sample review and any later repeat-order reference.