S1097S Doosan DX150 DH220-5 Starter Motor Wholesale

S1097S Starter Motor B2B Fitment Guide for Doosan DX150 and DH220-5 excavator

Doosan excavator-parts distributors and crawler service workshops can use S1097S as the commercial identity for the starter required in Doosan DX150 and DH220-5 excavator. The order should preserve the 11T pinion and the compact three-hole drive end used with the stated DX150 crawler and DH220-5 excavator records, avoiding a broad substitution based only on engine family or overall housing appearance.

Send the full S1097S application and old-unit identification rather than only a truck or engine brand. With mounting and terminal photos, quantity, destination and arrival target, Elecdura can discuss the correct starter, MOQ, packing, warranty and shipping route without unnecessary follow-up.

S1097S Starter Motor Drive-End Drawing for Aftermarket Distributors

For S1097S first-lot sampling, place the old and new starters in the same front-facing position. Check 3 × Ø10 mounting holes, Ø105 locating diameter, Ø135 mounting-hole circle and 40 mm distance to drive gear. Keeping those values with arrival photographs gives purchasing a reusable physical record for later replenishment.

After the S1097S mounting check, verify 24V, 4.5kW, 11T and CW with module 3. The final visual review covers the terminal studs, control connector and pinion. This prevents a physically related starter from being approved only because its reference appears in the same family.

S1097S Starter Motor OE Number Guide for Aftermarket Supply

1. Search group: S1097S, STR80199, 65262017063, 65262017076, 65262017076A, 65262017077B, 19080032 can help distributor teams locate the relevant starter family.
2. Order boundary: Confirm the complete reference with 24V, 4.5kW, 11T, CW, the drawing and terminal photographs before accepting one physical unit.

S1097S Starter Motor Bulk Order Packing and Lead-Time Support

For a bulk order of S1097S, Elecdura confirms availability, packing, lead time and freight against the required quantity and destination. Standard terms begin at 20 pieces, normally require 7–15 days after confirmation and include an 18-month warranty under the final sales agreement.

For multi-branch supply, show which quantity is needed immediately and which can follow as planned replenishment. The accepted S1097S sample, dimensional record and terminal photographs can then support carton marking, receiving checks and repeat orders across the customer’s network.

B2B buyers can use the video to review Elecdura’s starter-motor assembly and test process. The approved S1097S configuration remains defined by 24V, 4.5kW, 11T, CW, mounting geometry and terminals, which should be retained in the purchase record.

S1097S Starter Motor Questions from Commercial Buyers

Which checks should follow an OE-number match for S1097S in a Doosan DX150 DH220-5 dealer sourcing program?

A number match narrows the search but does not finish it. For S1097S, compare the stated application, electrical output, 11T drive, mounting geometry and terminal side. Buyers handling several references should list each complete number separately, allowing any genuinely different unit to receive its own offer and sample check.

Which cranking-circuit tests should precede replacement of S1097S in a Doosan DX150 DH220-5 dealer workshop?

Load-test the battery set and measure voltage drop on the positive and ground circuits while cranking. Inspect cable lugs, chassis grounds, the start-control signal and ring-gear condition before replacing S1097S. These checks distinguish a starter fault from low battery capacity, resistance or a control-circuit problem.

How should a fleet workshop verify S1097S against the removed starter during dealer sourcing?

For S1097S, begin with the machine, truck or engine identification, then read the full old-unit label. The physical check should cover 11T, Ø135 mounting-hole circle, Ø105 locating diameter and terminal orientation. Treat a different drive end or connector position as a separate item, even when an application description overlaps.

Which S1097S dimensions are practical for a warehouse inspection during a Doosan DX150 DH220-5 dealer inspection?

The first-lot check should cover 3 × Ø10 mounting holes, Ø105 locating diameter and 40 mm distance to drive gear. Add the 11T pinion, rotation and terminal position to the inspection sheet. Recording those details helps a warehouse identify a mixed or incorrectly labelled unit before it reaches a workshop or customer.

What demand information helps set a sensible reorder level for S1097S in a Doosan DX150 DH220-5 dealer program?

Build the forecast around actual equipment counts, failure history and the time needed to replenish each service location. For S1097S, keep the specified pinion and mounting interface visible in the stock record. This reduces emergency substitutions and gives purchasing a clearer basis for MOQ, packing and delivery discussions.

Which physical points should be checked before S1097S enters branch stock during a Doosan DX150 DH220-5 dealer receiving check?

For S1097S, match carton and product labels to the purchase order, then sample 24V, 11T, 3 × Ø10 mounting holes and terminal protection. Check the flange and pinion for shipping damage. Record lot numbers and arrival photographs, and isolate any different configuration before it is placed in saleable stock.

Which order conditions should be stated when asking about S1097S in a Doosan DX150 DH220-5 dealer sourcing program?

A useful RFQ states S1097S, the machine or engine model, old-unit label, mounting and terminal photographs, requested quantity and delivery country. Include whether the demand is a sample, urgent service order or scheduled stock. Those details allow pricing to cover the correct unit and realistic shipping plan.

Which test results help investigate a returned S1097S starter in a Doosan DX150 DH220-5 dealer review?

For a service review of S1097S, identify the shipment and unit, describe the starting condition and record installation details. Add photographs of the drive, flange and terminals plus battery, ground and positive-cable test results. If the unit was removed, protect it from additional damage and retain it until the review is complete.

S1097S Request a Starter Motor Fleet Supply Quote

Email info@elecdurauto.com with S1097S, the supported Doosan DX150 and DH220-5 excavator record, old-unit photographs, quantity, destination and required arrival date. Elecdura will use those details to confirm the 24V, 4.5kW, 11T CW starter and prepare wholesale pricing with MOQ, lead time, packing and freight.