V5 12V A2 130 mm Heavy-Duty A/C Compressor for LiuGong construction equipment

Wholesale V5 A/C Compressor for LiuGong construction equipment

Downtime on LiuGong construction equipment is expensive, so the compressor must arrive ready for the exact belt, hose and mounting layout. For LiuGong construction equipment jobsite maintenance where wrong-fit freight, hose routing and machine downtime must be controlled, Elecdura supplies this complete V5 compressor with V5 12V, A2 and 130 mm configuration. The stated 12V, A2 and 130 mm configuration remains the reference for quotation, packing and repeat stock.

The commercial value is clarity at handover: purchasing sees LiuGong construction equipment, the warehouse sees 12V, A2 and 130 mm, and the workshop sees the visible mounting layout. Those details allow the service-parts buyer to assess the whole assembly before it enters stock.

Importer Specification Sheet for This V5 A/C Compressor

For stock control, retain 12V, A2 and 130 mm with the LiuGong construction equipment application and the complete-assembly description. Shortening the line to V5 alone removes the details most likely to separate two look-alike units for LiuGong construction equipment. Vehicle-system values not shown in the table are confirmed from the specific service documentation for LiuGong construction equipment with 12V, A2 and 130 mm.

Importer Photo Review for This V5 A/C Compressor

When the plate is incomplete, the removed compressor becomes the strongest physical reference for LiuGong construction equipment. Clear views of the clutch, head, connector and feet preserve the details needed to distinguish this V5 build after it leaves the workshop during the LiuGong construction equipment 12V, A2 and 130 mm review.

For this assembly, the buyer needs to compare the pulley, clutch voltage, connector, suction and discharge ports and complete mounting geometry during the LiuGong construction equipment 12V, A2 and 130 mm review. That visual result carries more weight than a general model-family match when a nearby build uses a different clutch or hose layout during the LiuGong construction equipment 12V, A2 and 130 mm review.

Distributor Stock Separation for This V5 A/C Compressor

Keep other V5 versions with a different voltage, pulley, diameter, head, connector, port direction or mounting arrangement on separate stock lines for LiuGong fitment. Keep that distinction in the order line instead of depending on memory. A nearby V5 assembly for V5 12V, A2 and 130 mm assembly can share the housing outline while changing the belt, voltage or hose position, with 12V, A2 and 130 mm retained on the stock record.

Repeat this LiuGong V5 application orders should carry the same product image and configuration used for the original approval. That record is more dependable than choosing from a shelf of compressors by housing shape alone for LiuGong replacement line with 12V, A2 and 130 mm.

Wholesale A/C Compressor Handling for LiuGong construction equipment

At receiving, leave the ports capped while the warehouse checks the carton line against LiuGong fitment, V5 and 12V, A2 and 130 mm. Inspect the clutch, connector, head and mounting ears for transit damage, then retain a few receiving images with the order line.

The old-unit failure provides useful service evidence. Before fitting the 12V, A2 and 130 mm replacement to V5 12V, A2 and 130 mm assembly, inspect the belt path, hoses, airflow and circuit condition and correct the fault that could damage the new compressor.

Distributor RFQ Details for This V5 A/C Compressor

Fleet and aftermarket buyers can discuss volume pricing for this LiuGong V5 application compressor after the old-unit comparison is complete. That sequence lets commercial customization proceed without weakening the product identity for LiuGong replacement line with 12V, A2 and 130 mm.

If purchasing is comparing suppliers, give each one the same LiuGong fitment application, 12V, A2 and 130 mm and photo evidence. Consistent input produces quotations that are easier to compare on scope, packing and delivery in the V5 12V, A2 and 130 mm assembly 12V, A2 and 130 mm order.

Fleet Buyer FAQ for the LiuGong construction equipment A/C Compressor

The questions below address the fitment and purchasing details most likely to affect a this LiuGong V5 application wholesale order.

How should a buyer confirm the 12V clutch?

Confirm the stated clutch voltage for LiuGong replacement line and that the connector agrees with the product image. Record the result with the complete 12V, A2 and 130 mm description.

What wrong-stock risk applies to this A2 V5 compressor?

Keep other V5 versions with a different voltage, pulley, diameter, head, connector, port direction or mounting arrangement on separate stock lines for LiuGong fitment. The alternative should retain its own image and item code until a separate V5 12V, A2 and 130 mm assembly approval is complete.

Which photos help confirm this LiuGong construction equipment compressor?

The most useful set combines an in-vehicle or in-machine view with clear bench photographs of every connection side for this LiuGong V5 application with 12V, A2 and 130 mm. Include the label, but do not rely on it as the only evidence for LiuGong replacement line.

Why does port direction matter on this V5 compressor?

Port direction is one of the quickest ways to separate nearby V5 variants. The service-parts buyer should keep that angle visible in both the approval file and receiving check.

How should a buyer describe this V5 compressor?

The working identity combines the LiuGong fitment application with V5, 12V, A2 and 130 mm and the confirmed compressor view. On the V5 12V, A2 and 130 mm assembly 12V, A2 and 130 mm order, none of those elements should be dropped from the first-order review.

What should a wholesale RFQ include for this V5 compressor?

A useful RFQ combines the part identity with the commercial program: this LiuGong V5 application, 12V, A2 and 130 mm, quantity, destination, schedule and packaging.

What receiving checks apply to this A2 V5 compressor?

Use the product reference image to identify this V5 build, then check for shipping damage. The short inspection protects later picking and fleet warranty records.

Can this LiuGong construction equipment compressor use private-label packing?

Qualified programs may use buyer-brand labels or agreed cartons for LiuGong replacement line with 12V, A2 and 130 mm. The LiuGong fitment product record remains fixed so packaging cannot blur a variant difference.

Send an RFQ for This LiuGong construction equipment A/C Compressor

Send Elecdura the required quantity, destination and packing plan with the old-unit label and separate installation views. We will compare V5 12V, A2 and 130 mm assembly, 12V, A2 and 130 mm, the connector, head and mounting layout before preparing the quotation. Once the physical match is accepted, the same order line can support purchasing, receiving and future distributor replenishment.