ELECDURA NETWORK
Your Whole New Supply Chain For Heavy-Duty Parts
Whatsapp：
+86 18915027366
Phone：
+86 18915027366
//
//
5S14
Daewoo / Doosan
IATF 16949, ISO 9001, and other major OEM certification systems
OEM label and ODM customization accepted
50 - 100 pcs
7–15 Days
18 months
5S14 12V A1 142 mm configuration
Daewoo / Doosan construction equipment 12V version
Daewoo / Doosan construction equipment 12V version; confirm 5S14, 12V, A1 142 mm, connector, ports and mounting; compare the pulley, clutch voltage, connector, hose ports and complete mounting geometry
| Quantity: | |
|---|---|
Downtime on Daewoo / Doosan construction equipment 12V version is expensive, so the compressor must arrive ready for the exact belt, hose and mounting layout. The complete aftermarket 5S14 assembly is built around A1 142 mm 12V 5S14 configuration. Its 12V, A1 and 142 mm drive and visible mounting layout stay together as one orderable configuration for Daewoo / Doosan construction equipment 12V version maintenance where jobsite downtime and wrong-fit freight must be controlled.
For a practical RFQ, pair the Daewoo / Doosan construction equipment 12V version application with views of the clutch, connector, head and mounting layout. The resulting fitment record can be checked by purchasing, receiving and the technician without reducing the product to a generic 5S14 name.
| Application | Daewoo / Doosan construction equipment 12V version |
|---|---|
| Compressor model | 5S14 |
| Pulley / clutch | A1 and 142 mm |
| Clutch voltage | 12V |
| Supply form | Complete aftermarket A/C compressor assembly |
| Supplied configuration | A1 142 mm 12V 5S14 configuration |
A distributor can copy the table directly into its fitment record, but the old unit still provides the final visual comparison. That matters because 5S14 compressors may share a body family while carrying a different clutch, voltage, connector or hose head for Daewoo / Doosan construction equipment 12V version.
If several 5S14 versions are present in the same fleet, mark the old compressor before it reaches the bench. Photograph its installed position on Daewoo / Doosan construction equipment 12V version and keep the resulting angle shots with the specific fitment record.
Compare the pulley, clutch voltage, connector, hose ports and complete mounting geometry for Daewoo / Doosan construction equipment 12V version. The same review needs to agree with 12V, A1 and 142 mm. A conflict at either point calls for clarification before the A/C parts distributor approves a substitute.
Keep adjacent 5S14 versions with a different voltage, pulley, port direction or mounting layout on separate stock lines for Daewoo / Doosan construction equipment 12V version. Treat the alternative as a separate physical product, even if both units are commonly described by the same 5S14 family.
For a mixed-model shipment, state the quantity of this 5S14 configuration independently. That gives the packer a specific image and description and reduces the chance of wrong-stock returns.
The warehouse can inspect this Daewoo / Doosan construction equipment 12V version assembly without opening the sealed ports. Confirm 12V, A1 and 142 mm, then compare the visible head and feet with the reference image. A damaged or conflicting compressor remains outside available stock until reviewed for Daewoo / Doosan construction equipment 12V version with 12V, A1 and 142 mm.
The compressor is one part of the cooling circuit, so a clean installation matters for Daewoo / Doosan construction equipment 12V version with 12V, A1 and 142 mm. Resolve leaks, restriction, debris or belt misalignment on Daewoo / Doosan construction equipment 12V version, then commission the assembly with the service values for that exact application.
Importers can request bulk pricing, neutral packing or private-label presentation for this Daewoo / Doosan construction equipment 12V version compressor. Product identity is settled through 12V, A1 and 142 mm and the fitment evidence before packaging and marking become commercial choices.
For container planning, state how many units of this exact 5S14 configuration are required and whether cartons need buyer marks for Daewoo / Doosan construction equipment 12V version with 12V, A1 and 142 mm. The A/C parts distributor should keep any neighboring variant on a separate line.
These buyer questions connect the 5S14 product identity with quotation, receiving and workshop use for Daewoo / Doosan construction equipment 12V version.
List this 5S14 build separately from any neighboring variant and specify how many units are required for Daewoo / Doosan construction equipment 12V version. Add destination, timing and carton or label expectations.
Port direction is one of the quickest ways to separate nearby 5S14 variants. That buyer should keep that angle visible in both the approval file and receiving check.
Compare the Daewoo / Doosan construction equipment 12V version electrical circuit with the connector or label evidence on the removed unit. Keep 12V tied to the rest of the confirmed compressor configuration.
Keep adjacent 5S14 versions with a different voltage, pulley, port direction or mounting layout on separate stock lines for Daewoo / Doosan construction equipment 12V version. The alternative should retain its own image and item code until a separate Daewoo / Doosan construction equipment 12V version approval is complete.
Use the product reference image to identify this 5S14 build, then check for shipping damage. The short inspection protects later picking and fleet warranty records for Daewoo / Doosan construction equipment 12V version with 12V, A1 and 142 mm.
Purchasing can request neutral or branded packing after fitment approval. Artwork, label content and quantity are handled as commercial requirements for Daewoo / Doosan construction equipment 12V version with 12V, A1 and 142 mm.
The working identity combines the Daewoo / Doosan construction equipment 12V version application with 5S14, 12V, A1 and 142 mm and the confirmed compressor view. On the Daewoo / Doosan construction equipment 12V version 12V, A1 and 142 mm order, none of those elements should be dropped from the first-order review.
The most useful set combines an in-vehicle or in-machine view with clear bench photographs of every connection side for Daewoo / Doosan construction equipment 12V version with 12V, A1 and 142 mm. Include the label, but do not rely on it as the only evidence for Daewoo / Doosan construction equipment 12V version.
Send Elecdura the required quantity, destination and packing plan with the old-unit label and separate installation views in the Daewoo / Doosan construction equipment 12V version 12V, A1 and 142 mm order. We will compare Daewoo / Doosan construction equipment 12V version, 12V, A1 and 142 mm, the connector, head and mounting layout before preparing the quotation. The result is a quotation built around the confirmed 12V, A1 and 142 mm compressor rather than a broad family description.
