8944497250 Isuzu 4BD1M Starter Motor Wholesale

8944497250 Isuzu 4BD1M Starter Motor Value for Distributors

Isuzu 4BD1 and 4BD1M engines continue to serve industrial machines and workshop rebuild programs. Combining 8944497250 with the engine plate and old starter gives distributors a specific item for quotations, stock replenishment and long-term service support.

A compact two-ear face can resemble other Isuzu and Nikko starters, particularly when only a side photograph is available. Verify the 11T pinion, two Ø13 holes, Ø95 locating face, Ø120 reference circle and terminal orientation before selecting a replacement.

8944497250 Starter Motor Two-Ear Drawing for B2B Matching

This unit is specified as 24V, 4.5kW, 11T, module 3 and clockwise rotation. Listing the complete combination helps workshop buyers avoid treating every 4BD1 starter as identical when an engine has previous repair or replacement history.

8944497250 Starter Motor Dimensions for Isuzu 4BD1M Supply — compare the drawing with the removed starter before placing a volume order.

The technical drawing provides an Ø120 mounting-circle reference, Ø95 locating diameter and 21 mm and 18 mm axial positions around the two-hole flange. A square drive-end view and measured side view are the most useful images for comparison.

8944497250 Starter Motor OE Checks for Isuzu Engine Buyers

Isuzu 8944497250 and 8944545590 connect with Nikko 023000-1700 and S9170. Use the complete group to search stock, then retain the 4BD1M or 4BD1 engine identity so the quotation stays tied to the intended installation.

A rebuild distributor can distinguish exchange demand, new replacement demand and branch reserve while using one confirmed product definition. Keeping the engine variant and customer equipment on each line improves later picking and after-sales discussion.

8944497250 Starter Motor Workshop Supply and Factory Video

Sample each first lot for the 11T drive, two-ear mounting face, locating surface, terminal protection and reference labels. Photographs taken at receiving can help workshops identify later shipments when the customer's old starter is no longer available.

The production video presents Elecdura starter assembly and electrical testing for B2B programs. Isuzu engine specialists can review that capability while defining order quantities, export cartons, replacement labels, receiving checks and delivery timing.

8944497250 Starter Motor FAQs for B2B Buyers

How should an Isuzu 4BD1M enquiry identify 8944497250?

Send the 4BD1M or 4BD1 engine plate, host equipment details and every readable number from the removed starter. Include straight views of the two-ear mounting face and terminals. Elecdura will compare these inputs with the 24V 4.5kW 11T CW product definition, giving the buyer a clear basis for pricing and later repeat orders.

Which numbers should be included with 8944497250?

Add 8944545590, 023000-1700 and S9170 when they appear on the customer unit or purchasing data. Write the numbers completely and keep the 4BD1M application on the same RFQ line. Elecdura will use the group together with the two-hole flange and 11T pinion, avoiding a match based only on one shortened reference.

What mounting checks distinguish the 4BD1M two-ear version?

Measure both Ø13 holes, the Ø120 mounting-circle reference and the Ø95 locating diameter. Compare the 21 mm and 18 mm axial positions from a square side view. These checks separate 8944497250 from three-hole Isuzu starters and help confirm that the pinion and flange will sit in the intended engine installation.

Why must 11T and module 3 be confirmed together?

The tooth count describes how many teeth are present, while module 3 describes the gear form. For 8944497250, both values must agree with clockwise rotation and the measured drive position. A starter with eleven teeth but another module can engage incorrectly, so the pinion should be photographed clearly and compared before a volume order.

What should a workshop test before replacing the 4BD1M starter?

Load-test the 24V battery system, measure voltage drop through positive and ground cables, and confirm the solenoid receives a reliable start signal. Inspect terminals for corrosion or heat damage. Keeping these readings with the 8944497250 service request helps distinguish a wiring problem from a starter fault and supports clearer after-sales communication.

What should appear on the warehouse label for 8944497250?

Use 8944497250, Isuzu 4BD1M/4BD1, 24V 4.5kW 11T CW and a clear image of the two-ear mounting face. Add the main cross references if label space allows. This makes the stock line useful to counter staff and reduces the chance that a nearby three-hole or different-pinion starter is issued by appearance.

How should the two-ear Isuzu starter be protected in transit?

Support the starter by its main housing so neither mounting ear carries an impact load. Cover the pinion and terminal studs, prevent movement inside the carton and keep the product label visible. When the shipment arrives, inspect both ears and the locating face before shelving the unit, because small flange damage can affect installation.

What does Elecdura return after reviewing an 8944497250 RFQ?

Elecdura will confirm the compared 4BD1M product configuration and provide quantity-based pricing, supply timing, packing choices and destination terms. If the old-unit photographs do not show the pinion or flange clearly, the response will request the missing view. This lets the buyer resolve technical questions before committing the purchase order.

Request 8944497250 Isuzu Starter Motor Distributor Terms

Email the Isuzu 4BD1M or 4BD1 engine details, equipment model, every readable starter number, square photographs, quantity and destination to info@elecdurauto.com. Elecdura will compare 8944497250 and provide distributor terms for the requested supply.