10461431 CAT 3126 Starter Motor Wholesale

10461431 Starter Motor Distributor Application Guide for Caterpillar 3126 engine

For a fleet parts team, 10461431 identifies one Caterpillar 3126 engine requirement. The 12-tooth module-3.175 drive for the 10461431 and 10R1718 Caterpillar 3126 group provides a clear fitment boundary for sample, stock and replacement reviews.

A useful enquiry pairs 10461431 with the equipment record, old-starter label and clear front, side and terminal images. Add the order quantity, destination and required date so technical selection, sample planning, carton marking and freight options can be addressed in one response.

10461431 Starter Motor Mounting Dimensions for Distributor Approval

Use the 10461431 technical drawing to check Ø89 locating diameter, 47 mm distance to drive gear and Ø127 mounting-hole circle. Add the 3 × Ø11 mounting holes to the receiving sheet. These are practical controls for an approved sample because they can be measured before the starter is installed or released to branch stock.

Complete the 10461431 comparison with 12V, 4.0kW, the 12T drive, module 3.175 and CW rotation. Review pinion condition, terminal location and available cable clearance together. These controls prevent a valid OE search result from being treated as automatic physical interchangeability.

10461431 Starter Motor Reference Group for Wholesale Sourcing

• Use the full number: Start with 10R1718, 1757332, 2071513, 10461431, 10461434, 10461496, retaining prefixes, suffixes and separators in the RFQ.
• Confirm the hardware: The final match requires the stated electrical rating, drive, mounting interface and terminal side; unmatched versions should remain separate.

10461431 Starter Motor Distributor Stock and Delivery Support

MOQ begins at 20 pieces, with normal lead time of 7–15 days after order confirmation and an 18-month warranty under agreed terms. For 10461431, the offer can distinguish samples, available stock and production quantities while confirming carton protection and the shipment plan for the destination.

Use the exact 3126 equipment or truck record to distinguish this cross-reference family from other Caterpillar starters with a similar flange. Once that boundary is fixed, purchasing can separate urgent units from routine replenishment and define branch quantities, stock labels and freight timing without encouraging an unverified substitute.

Elecdura’s video shows starter-motor production and electrical testing used to support wholesale orders. It provides supplier-capability context for 10461431; the product decision itself still depends on the complete reference, 12V 4.0kW rating, drive end, mounting face and terminal layout.

10461431 Starter Motor Questions from Commercial Buyers

Which checks should follow an OE-number match for 10461431 in a CAT 3126 branch sourcing program?

A number match narrows the search but does not finish it. For 10461431, compare the stated application, electrical output, 12T drive, mounting geometry and terminal side. Buyers handling several references should list each complete number separately, allowing any genuinely different unit to receive its own offer and sample check.

What should a distributor match before ordering 10461431 for Caterpillar 3126 engine during branch sourcing?

Use the complete removed-unit number and exact Caterpillar 3126 engine record. Compare the 12T pinion, 3 × Ø11 mounting holes, Ø89 locating diameter and terminal side with the old starter. A housing resemblance is insufficient when the drive position, mounting face or cable connection differs.

How can a service team rule out cable or battery faults before fitting 10461431 in a CAT 3126 branch workshop?

Record battery voltage at rest and during the start attempt, then test both main cables under load. Check grounds, terminal tightness and the control feed to the solenoid. Supplying those readings with an enquiry for 10461431 helps the workshop avoid replacing a sound starter when the actual fault is elsewhere.

Which 10461431 dimensions are practical for a warehouse inspection during a CAT 3126 branch inspection?

The first-lot check should cover 3 × Ø11 mounting holes, Ø89 locating diameter and 47 mm distance to drive gear. Add the 12T pinion, rotation and terminal position to the inspection sheet. Recording those details helps a warehouse identify a mixed or incorrectly labelled unit before it reaches a workshop or customer.

What demand information helps set a sensible reorder level for 10461431 in a CAT 3126 branch program?

Build the forecast around actual equipment counts, failure history and the time needed to replenish each service location. For 10461431, keep the specified pinion and mounting interface visible in the stock record. This reduces emergency substitutions and gives purchasing a clearer basis for MOQ, packing and delivery discussions.

Which physical points should be checked before 10461431 enters branch stock during a CAT 3126 branch receiving check?

For 10461431, match carton and product labels to the purchase order, then sample 12V, 12T, 3 × Ø11 mounting holes and terminal protection. Check the flange and pinion for shipping damage. Record lot numbers and arrival photographs, and isolate any different configuration before it is placed in saleable stock.

Which order conditions should be stated when asking about 10461431 in a CAT 3126 branch sourcing program?

A useful RFQ states 10461431, the machine or engine model, old-unit label, mounting and terminal photographs, requested quantity and delivery country. Include whether the demand is a sample, urgent service order or scheduled stock. Those details allow pricing to cover the correct unit and realistic shipping plan.

Which test results help investigate a returned 10461431 starter in a CAT 3126 branch review?

For a service review of 10461431, identify the shipment and unit, describe the starting condition and record installation details. Add photographs of the drive, flange and terminals plus battery, ground and positive-cable test results. If the unit was removed, protect it from additional damage and retain it until the review is complete.

10461431 Send a Starter Motor Distributor Enquiry

For a focused 10461431 quotation, share the machine or engine record, old-starter number, mounting and terminal images, order volume, delivery country and timing. You can email the RFQ directly to info@elecdurauto.com; Elecdura will reply with the matching specification, availability, packing and commercial terms.