ELECDURA NETWORK
Your Whole New Supply Chain For Heavy-Duty Parts
Whatsapp：
+86 18915027366
Phone：
+86 18915027366
10PA15C
Doosan
IATF 16949, ISO 9001, and other major OEM certification systems
OEM label and ODM customization accepted
50 - 100 pcs
7–15 Days
18 months
10PA15C 12V A 130 mm configuration
Doosan 90-9C excavator
Doosan 90-9C excavator; confirm 10PA15C, 12V, A 130 mm, connector, ports and mounting; check the A-section belt, 12V connector and compact excavator mounting
| Quantity: | |
|---|---|
A stopped Doosan 90-9C excavator machine is expensive, so the compressor must arrive ready for the exact belt, hose and mounting layout. This complete aftermarket 10PA15C A/C compressor is supplied for compact excavator service with tight belt and bracket clearances. The page keeps single-A 130 mm 12V clutch together with the 12V, A and 130 mm drive on the receiving note, giving the A/C parts distributor one coherent product identity.
The commercial value is clarity at handover: purchasing sees Doosan 90-9C excavator, the warehouse sees 12V, A and 130 mm, and the workshop sees the visible mounting layout. Those details allow the A/C parts distributor to assess the whole assembly before it enters stock.
| Application | Doosan 90-9C excavator |
|---|---|
| Compressor model | 10PA15C |
| Pulley / clutch | A and 130 mm |
| Clutch voltage | 12V |
| OE / cross reference | Not stated in the catalog |
| Supply form | Complete aftermarket A/C compressor assembly |
| Catalog configuration | single-A 130 mm 12V clutch |
The listed fields give the A/C parts distributor the product-level facts needed for a quote. They do not replace the machine or truck service specification. In particular, any oil balance, refrigerant charge or commissioning value omitted from the product data must be confirmed for Doosan 90-9C excavator.
A good approval set answers four physical questions: how the belt meets the clutch, where the connector sits, which way the ports face and how the compressor bolts to Doosan 90-9C excavator. The compressor angle shots should make each answer visible without a collage.
Check the A-section belt, 12V connector and compact excavator mounting. Record the result beside 12V, A and 130 mm and the Doosan 90-9C excavator application so receiving can use the same evidence as purchasing.
The PV4 130 mm 12V catalog product is physically distinct despite sharing model and voltage; that is the practical boundary between this product and the nearest look-alike. Purchasing can preserve it by retaining the configuration on the receiving note.
The warehouse should be able to identify this Doosan 90-9C excavator compressor without opening a service manual or relying on the casting alone. A full stock description and the approved image provide that control.
The receiving team does not need to dismantle the compressor. It only needs to confirm the visible configuration for Doosan 90-9C excavator, check the protective caps and clutch area, and hold any unit that could create workshop delays.
The old-unit failure provides useful service evidence. Before fitting the 12V, A and 130 mm replacement to Doosan 90-9C excavator, inspect the belt path, hoses, airflow and circuit condition and correct the fault that could damage the new compressor.
Importers can request bulk pricing, neutral packing or private-label presentation for this Doosan 90-9C excavator compressor. Product identity is settled through 12V, A and 130 mm and the fitment evidence before packaging and marking become commercial choices.
A complete enquiry states quantity, destination, target delivery window and packaging plan; add Doosan 90-9C excavator, 12V, A and 130 mm and the compressor angle shots, especially the views needed to check the A-section belt, 12V connector and compact excavator mounting.
These buyer questions connect the 10PA15C product identity with quotation, receiving and workshop use for Doosan 90-9C excavator.
For the 12V, A and 130 mm 10PA15C build used on Doosan 90-9C excavator, list this 10PA15C build separately from any neighboring variant and specify how many units are required; add destination, timing and carton or label expectations.
Qualified programs may use buyer-brand labels or agreed cartons. The Doosan 90-9C excavator product record remains fixed so packaging cannot blur a variant difference.
For the 12V, A and 130 mm 10PA15C build used on Doosan 90-9C excavator, use uncropped angle shots rather than a collage: clutch, ports, connector, front mount, rear mount and installed position; keep them with the receiving note for repeat purchasing.
The PV4 130 mm 12V catalog product is physically distinct despite sharing model and voltage; the distinction should remain visible from RFQ through receiving, even when both compressors share familiar castings.
Receiving should reconcile the carton description, 12V, A and 130 mm and visible fitment points for Doosan 90-9C excavator. Photograph discrepancies before the unit enters saleable inventory.
Use one item code per approved configuration and avoid combining quantities under the 10PA15C family. The packing list should preserve the same separation.
The hose head must suit the routing and connection style on Doosan 90-9C excavator. A mirrored or rotated outlet can prevent installation even when 12V, A and 130 mm is correct.
Use Doosan 90-9C excavator, 10PA15C and 12V, A and 130 mm together; add the approved image and the mounting or port detail used to accept this physical build.
Importers and fleet buyers can submit an RFQ for this 10PA15C assembly with expected demand, delivery location and packing needs. Include the approved Doosan 90-9C excavator reference views to keep the physical build clear. This information allows the quotation to separate the 12V, A and 130 mm build from nearby 10PA15C variants and state the requested packing clearly.
