10875 Mitsubishi S6K Caterpillar Starter Motor Wholesale

10875 Mitsubishi S6K Starter Motor Supply for Caterpillar Distributors

Caterpillar equipment-parts distributors may receive this requirement as 10875, 0R1091, 1146864 or a Mitsubishi M3T number. Linking those searches to the Mitsubishi S6K engine and the complete 24V 5.5kW 10T configuration gives sales and purchasing teams one usable product identity.

The reference family appears in agricultural, industrial and construction-equipment channels, so a broad Caterpillar description is not enough for dispatch. The machine model, S6K engine record, two-ear drive end, pinion and external lead arrangement should agree with the removed starter.

10875 24V 5.5kW 10T Starter Drawing for Equipment Parts Buyers

This product combines 24V, 5.5kW, ten teeth, module 3 and clockwise rotation. Keeping the electrical rating and drive data together on the quotation and stock label helps a distributor avoid substituting a similar Mitsubishi unit with another pinion or output definition.

10875 Mitsubishi S6K Starter Drawing for Caterpillar Buyers — compare the drawing with the removed starter before placing a volume order.

Start with the two diameter-11 mounting holes and the diameter-105 mounting reference, then compare the 38-degree ear angle, diameter-93.5 locating reference, and the 23 mm and 41 mm axial values. A square drive-end image makes these checks more dependable for remote orders.

10875 Caterpillar 0R1091 Starter Cross Reference for Procurement

Use 10875 as the primary commercial reference and retain 0R1091 or 1146864 when the enquiry originates from a Caterpillar record. Mitsubishi numbers M003T56172, M003T56174, M003T56181, M003T56182, M003T56183 and M008T60471 provide additional search routes for the same purchasing discussion.

For Caterpillar agricultural, industrial or excavator demand, record the exact machine model and serial beside the Mitsubishi S6K engine information. Separating quantities by host equipment lets branches replenish the approved starter without turning one cross-reference group into an unrestricted fitment claim.

10875 S6K Starter Stocking for Agricultural and Industrial Channels

On the first incoming lot, sample units from different cartons for the 10T pinion, two mounting ears, locating face, solenoid position, insulated signal leads and protected power studs. Saving the accepted front, side and terminal views gives warehouse teams a clear reference for later releases.

The Elecdura video presents starter-motor assembly and electrical testing for export programs. Caterpillar and Mitsubishi engine-parts buyers can use it to review production capability while the 10875 order remains defined by the S6K application, 24V 5.5kW rating and measured drive end.

10875 Starter Motor FAQs for Caterpillar Equipment Buyers

What machine information should accompany a 10875 enquiry?

Send the Caterpillar machine model and serial, the Mitsubishi S6K engine plate, and every readable number on the removed starter. Add straight photographs of the drive end, side profile and terminals. This combination gives the sales team enough information to review the stated application and physical interface before quoting.

How should 0R1091 or 1146864 appear on a purchase order?

Place the Caterpillar number found in the machine or old-unit record beside 10875, rather than replacing the complete product identity with a single cross-reference. Also record the S6K engine, 10T pinion and approved mounting image so purchasing, receiving and branch teams can trace the same configuration.

Which rating should a buyer use for this 10875 product?

Use the product definition shown here: 24V, 5.5kW, 10T, module 3 and clockwise rotation. Compare that full set with the removed unit and the customer's machine record. Recording only 10875 can hide differences within a broad replacement family, while the complete rating gives the quotation a clear technical basis.

Which mounting dimensions distinguish the 10875 drive end?

Check both diameter-11 mounting holes, the diameter-105 mounting reference and the 38-degree ear relationship. Then compare the diameter-93.5 locating area and the 23 mm and 41 mm axial values. A front photograph taken square to the flange helps prevent perspective from masking a geometry mismatch.

Should agricultural and construction demand share one stock record?

They can share an approved product line when the engine, electrical rating and drive end are identical, but quantities should remain tagged by machine application. Separate customer-use notes help the distributor see where demand originates, preserve the original fitment evidence and avoid treating every Caterpillar S6K enquiry as interchangeable.

What should receiving inspect on the first 10875 shipment?

Sample more than one carton and compare the 10T pinion, two mounting ears, locating surface, solenoid position, signal-lead insulation and power studs with the accepted photographs. Check the drive nose and exposed connections for impact or moisture damage, then record the approved lot before units are distributed.

What cranking checks should accompany a warranty enquiry?

Load-test the 24V battery bank and measure voltage drop on both positive and ground paths while cranking. Verify the relay output and start signal, then inspect the ring gear and cable terminals. Supplying these readings with the machine and starter images gives the distributor useful evidence for a technical review.

What does Elecdura need for a 10875 wholesale quotation?

Provide the Caterpillar application, Mitsubishi S6K engine details, removed-starter references and photographs, order quantity, annual forecast, packing requirement, destination and requested delivery date. State whether the purchase supports urgent repair stock, agricultural-season demand or scheduled branch replenishment so pricing and lead time can be planned accordingly.

Request 10875 Mitsubishi S6K Starter Motor Wholesale Terms

Email the Caterpillar machine model and serial, Mitsubishi S6K engine details, every readable starter number, drive-end and terminal photographs, required quantity, packing preference and destination to info@elecdurauto.com. Elecdura will review the 10875 configuration and reply with distributor pricing, lead time and shipping terms.