S1089 Doosan 350 Starter Motor Wholesale Supply

S1089 Starter Motor Distributor Application Guide for Doosan 350 excavator

For a fleet parts team, S1089 identifies one Doosan 350 excavator requirement. The 24V 6.0kW 11T module-3 configuration assigned to the Doosan 350 record provides a clear fitment boundary for sample, stock and replacement reviews.

A useful enquiry pairs S1089 with the equipment record, old-starter label and clear front, side and terminal images. Add the order quantity, destination and required date so technical selection, sample planning, carton marking and freight options can be addressed in one response.

S1089 Starter Motor Mounting Dimensions for Distributor Approval

Use the S1089 technical drawing to check Ø115 locating diameter, 49 mm distance to drive gear and Ø140 mounting-hole circle. Add the 3 × Ø13 mounting holes to the receiving sheet. These are practical controls for an approved sample because they can be measured before the starter is installed or released to branch stock.

Complete the S1089 comparison with 24V, 6.0kW, the 11T drive, module 3 and CW rotation. Review pinion condition, terminal location and available cable clearance together. These controls prevent a valid OE search result from being treated as automatic physical interchangeability.

S1089 Starter Motor Reference Group for Wholesale Sourcing

• Use the full number: Start with S1089, 65262017073C, 65262017077, 65262017077A, 19080026, DRS0286N, retaining prefixes, suffixes and separators in the RFQ.
• Confirm the hardware: The final match requires the stated electrical rating, drive, mounting interface and terminal side; unmatched versions should remain separate.

S1089 Starter Motor Distributor Stock and Delivery Support

MOQ begins at 20 pieces, with normal lead time of 7–15 days after order confirmation and an 18-month warranty under agreed terms. For S1089, the offer can distinguish samples, available stock and production quantities while confirming carton protection and the shipment plan for the destination.

Use the complete 19080026 or S1089 reference and Doosan machine information to control interchange. Once that boundary is fixed, purchasing can separate urgent units from routine replenishment and define branch quantities, stock labels and freight timing without encouraging an unverified substitute.

Elecdura’s video shows starter-motor production and electrical testing used to support wholesale orders. It provides supplier-capability context for S1089; the product decision itself still depends on the complete reference, 24V 6.0kW rating, drive end, mounting face and terminal layout.

S1089 Starter Motor Questions from Commercial Buyers

Which first-lot checks protect a distributor receiving S1089 during a Doosan 350 branch receiving check?

For S1089, count the cartons, compare labels and inspect selected units for flange, pinion and terminal damage. The sample should match 3 × Ø13 mounting holes, Ø115 locating diameter and the specified 11T drive. Hold any exception outside normal inventory until purchasing and the supplier agree on the correct disposition.

Can a purchasing team consolidate every S1089 reference into one stock line in a Doosan 350 branch sourcing program?

The references identify a related sourcing family, not automatic interchangeability. Use S1089, 65262017073C, 65262017077, 65262017077A, 19080026 to locate possible matches, then confirm 24V, 6.0kW, 11T, CW and the mounting face. Any difference in drive position, terminal layout or locating diameter requires a separate product decision.

How can an importer avoid mixing S1089 with a similar drive-end version during branch sourcing?

For S1089, begin with the machine, truck or engine identification, then read the full old-unit label. The physical check should cover 11T, Ø140 mounting-hole circle, Ø115 locating diameter and terminal orientation. Treat a different drive end or connector position as a separate item, even when an application description overlaps.

Before removing S1089, what should the workshop test under load in a Doosan 350 branch workshop?

Before fitting S1089, verify battery condition, cable size and voltage drop at cranking current. Clean the mounting ground and inspect the ring gear and control circuit. A slow-crank complaint can come from weak batteries, poor connections or mechanical drag, so those causes should be separated from the starter itself.

What physical controls belong on a first-lot check for S1089 during a Doosan 350 branch inspection?

For S1089, use a straight front view to compare the 3 × Ø13 mounting holes and Ø140 mounting-hole circle; use the side view for Ø115 locating diameter and 49 mm distance to drive gear. Complete the check with 11T, CW and terminal orientation. This combination is more reliable than an angled overall photograph alone.

How should Doosan distributors plan stock for S1089 in a Doosan 350 branch program?

Set reserve stock from quarry utilization and site-to-branch delivery time, with the approved flange image retained. Add recent usage, equipment population, transfer time and service level. Elecdura can then separate sample, emergency and replenishment quantities and plan packing or staged delivery around the buyer’s schedule.

What information should accompany a distributor RFQ for S1089 in a Doosan 350 branch sourcing program?

A useful RFQ states S1089, the machine or engine model, old-unit label, mounting and terminal photographs, requested quantity and delivery country. Include whether the demand is a sample, urgent service order or scheduled stock. Those details allow pricing to cover the correct unit and realistic shipping plan.

What evidence separates an electrical-system fault from a concern involving S1089 in a Doosan 350 branch review?

For a service review of S1089, identify the shipment and unit, describe the starting condition and record installation details. Add photographs of the drive, flange and terminals plus battery, ground and positive-cable test results. If the unit was removed, protect it from additional damage and retain it until the review is complete.

S1089 Send a Starter Motor Distributor Enquiry

For a focused S1089 quotation, share the machine or engine record, old-starter number, mounting and terminal images, order volume, delivery country and timing. You can email the RFQ directly to info@elecdurauto.com; Elecdura will reply with the matching specification, availability, packing and commercial terms.