36100-4A010 Hyundai Starex H200 12V 2.2kW Starter Motor Bulk Supply

36100-4A010 Hyundai Starex H200 Starter Motor Wholesale Overview

Distributors supporting Hyundai Starex H200 can source 36100-4A010 in the Mando-type replacement configuration. The stated 12V, 2.2kW rating and 10T pinion are kept visible because this product provides Hyundai Starex H200 buyers with a controlled 10T replacement line for sample-to-volume purchasing; they should remain on the purchase order and receiving record.

Service network teams handling engine-overhaul planning should send 36100-4A010, the Hyundai Starex H200 record, required quantity, destination and delivery timing together. Add straight drive-end and terminal-side photographs of the removed starter. Elecdura can then address a controlled first sample, planned warehouse release and the correct physical configuration in one useful commercial offer.

36100-4A010 Starter Motor B2B Specification

The fastest useful fit check combines a square drive-end view with a side profile. Use both images to compare 10T pinion, mounting face, drive reach, solenoid position and terminal orientation, then check the locating shoulder and pinion position with the old starter and proposed sample in the same orientation. This creates a reusable reference for later branch orders.

Confirm the machine system as 12V and retain the 2.2kW, 10T specification on the RFQ. Check that the main cable and control lead can reach their studs without tight bends or interference, especially where the starter sits close to engine or frame components.

36100-4A010 Starter Motor Cross-References for Wholesale Supply

For repeat supply, store 36100-4A010, Hyundai Starex H200, the received lot and the confirmed old-unit photographs together. That record allows a distributor to reorder the same configuration without rebuilding the decision from a loose list of aftermarket numbers.

For engine-overhaul planning, keep 36100-4A010, Hyundai Starex H200, 12V, 2.2kW and 10T on one purchasing record. At goods-in, review label and reference traceability before releasing the lot. This gives the service network a documented basis for a controlled first sample when the next order is raised.

36100-4A010 Starter Motor B2B Supply for Hyundai Starex H200

Distributor quotations can separate sample validation, regular replenishment and urgent service demand. Once the exact product and quantity are confirmed, Elecdura provides packing, lead-time and shipping terms; standard supply is 20 pieces minimum with an 18-month warranty under agreed conditions.

Demand from a commercial-vehicle dealer should keep 36100-4A010 tied to Hyundai Starex H200. For engine-overhaul planning, the service network can use a project-site reserve, capture the terminal-side view and review label and reference traceability at goods-in. This supports a controlled first sample while keeping planned warehouse release visible.

Watch the Elecdura factory video for an overview of starter-motor manufacturing and electrical testing. For purchasing, keep 36100-4A010, Hyundai Starex H200 and the confirmed physical configuration on the quotation.

36100-4A010 Hyundai Starex H200 Starter Motor FAQs

How can a service network source 36100-4A010 for engine-overhaul planning?

Service network teams should tie 36100-4A010 to Hyundai Starex H200, 12V, 2.2kW, 10T and the removed-unit photographs before requesting price. For engine-overhaul planning, state quantity, destination and delivery timing, then review label and reference traceability. Ask Elecdura to address planned warehouse release and a controlled first sample in the same quotation.

Service network receiving review: Is a matching 10T pinion enough to approve 36100-4A010?

No. Tooth count is only one control. The locating face, mounting pattern, pinion reach, solenoid position, terminals and 12V system must also agree with the removed starter. Review the full set before a sample or bulk order is accepted. Carry the 36100-4A010 result into planned warehouse release.

Planned warehouse release question: What lead-time details should be stated for the 36100-4A010 order?

Tell Elecdura the quantity, destination, required arrival date and whether the demand supports an urgent repair, normal replenishment or a planned project. Normal preparation is 7–15 days after confirmation, but freight and packing choices depend on the actual schedule and shipment size. Retain the 36100-4A010 result for engine-overhaul planning.

Label and reference traceability check: When is a sample order useful for 36100-4A010?

A sample is useful when the old label is incomplete, the application record is uncertain or several similar housings are in local stock. Confirm the sample against mounting, drive and electrical details before scaling the order. Keep the accepted photographs and measurements for later purchasing and receiving checks. Keep 36100-4A010 traceable through engine-overhaul planning.

Service network receiving review: Can 36100-4A010 be supplied with private-label packaging?

Neutral packaging is available, and private-label requirements can be reviewed for qualified orders. Send the expected quantity, artwork, label fields, carton preference and destination early. Elecdura will confirm what can be supported, any additional preparation and the effect on lead time before the order is finalized. Link 36100-4A010 photographs to the label and reference traceability record.

To support a controlled first sample, how should alternate references for 36100-4A010 be handled?

List every complete alternate on a separate RFQ line and state whether it came from a label, invoice or parts record. Compare voltage, output, pinion, mounting and terminals before treating it as interchangeable. If one point remains uncertain, request a separate offer instead of combining the numbers. Retain the 36100-4A010 result for engine-overhaul planning.

For planned warehouse release, what should receiving staff inspect on the 36100-4A010 shipment?

Confirm carton count, labels and visible condition before sampling. On selected units, compare the pinion, mounting face, solenoid and terminals with the confirmed record. Isolate any damaged or different unit with carton and lot photographs before the remainder is released to normal Hyundai Starex H200 inventory. Retain the 36100-4A010 result for engine-overhaul planning.

Planned warehouse release question: Which physical details matter most when comparing 36100-4A010?

Compare 10T pinion, mounting face, drive reach, solenoid position and terminal orientation with the removed starter, using a straight flange view and a side view parallel to the shaft. Also inspect the locating surface and drive projection. Matching only paint, motor diameter or one mounting ear can hide a difference that affects installation or pinion engagement. File 36100-4A010 with the label and reference traceability check.

Contact Elecdura for 36100-4A010 Starter Motor Pricing

Email info@elecdurauto.com with 36100-4A010, Hyundai Starex H200 details, old-unit photographs, quantity, delivery country and required date. Elecdura will reply with the matching 12V 2.2kW 10T offer, availability, packing, lead time and freight options.