0001 368 085 Perkins 24V 4.0kW Starter Motor Bulk Supply

0001 368 085 Perkins Starter Motor Distributor Sourcing

The 0001 368 085 starter for Perkins is intended for replacement demand. It combines 24V, 4.0kW output with the 10T drive, allowing B2B buyers to keep the quotation tied to one application and physical configuration rather than a broad visual description.

Export wholesaler teams handling urgent replacement should send 0001 368 085, the Perkins record, required quantity, destination and delivery timing together. Add straight drive-end and terminal-side photographs of the removed starter. Elecdura can then address shorter machine downtime, sample-to-bulk scheduling and the correct physical configuration in one useful commercial offer.

0001 368 085 Starter Motor Wholesale Fitment Checks

Do not approve 0001 368 085 from the label alone. Match 10T pinion, mounting face, drive reach, solenoid position and terminal orientation, followed by the locating surface and drive projection. If one point differs, keep the unit on hold until the engine or machine record explains the difference.

Electrical identity and mechanical fit must agree. Verify 24V, the 4.0kW rating and terminal layout, then count the 10 pinion teeth. A correct flange with the wrong system voltage, output or cable position is not an acceptable substitute.

0001 368 085 Starter Motor Cross-References for Wholesale Supply

Keep the reference group 0001 368 085 attached to the Perkins details and confirmed photographs. This gives branch staff a practical reorder record and prevents a number from being separated from the exact configuration previously received.

For urgent replacement, keep 0001 368 085, Perkins, 24V, 4.0kW and 10T on one purchasing record. At goods-in, review flange and locating-register fit before releasing the lot. This gives the export wholesaler a documented basis for shorter machine downtime when the next order is raised.

0001 368 085 Starter Motor Export Supply and Inventory Planning

Elecdura supports qualified wholesale orders from 20 pieces, with normal preparation of 7–15 days after order confirmation and an 18-month warranty under agreed sales terms. Neutral packaging is available, and private-label requirements can be reviewed against order quantity, artwork and delivery schedule.

Demand from a diesel rebuild bench should keep 0001 368 085 tied to Perkins. For urgent replacement, the export wholesaler can use a fast-moving counter stock, record the removed-unit dimensions and review flange and locating-register fit at goods-in. This supports shorter machine downtime while keeping sample-to-bulk scheduling visible.

Watch the Elecdura factory video for an overview of starter-motor manufacturing and electrical testing. For purchasing, keep 0001 368 085, Perkins and the confirmed physical configuration on the quotation.

0001 368 085 Perkins Starter Motor FAQs

How can an export wholesaler source 0001 368 085 for urgent replacement?

Export wholesaler teams should tie 0001 368 085 to Perkins, 24V, 4.0kW, 10T and the removed-unit photographs before requesting price. For urgent replacement, state quantity, destination and delivery timing, then review flange and locating-register fit. Ask Elecdura to address sample-to-bulk scheduling and shorter machine downtime in the same quotation.

To support shorter machine downtime, why should Perkins stay on the 0001 368 085 order line?

The application gives purchasing and receiving teams context that a reference alone may not provide. Keeping Perkins, the electrical rating, pinion and confirmed photographs together makes repeat ordering clearer and reduces the chance that a visually related starter from another machine or engine family is substituted. Link 0001 368 085 photographs to the flange and locating-register fit record.

For urgent replacement handled by an export wholesaler, what can cause slow cranking besides a fault in 0001 368 085?

Low battery capacity, excessive voltage drop, corroded lugs, weak grounds, undersized cables and mechanical engine drag can all reduce cranking speed. Record loaded battery voltage and cable-drop readings before replacement. This protects the buyer from changing a starter while the original circuit problem remains. Carry the 0001 368 085 result into sample-to-bulk scheduling.

To support shorter machine downtime, which physical details matter most when comparing 0001 368 085?

Compare 10T pinion, mounting face, drive reach, solenoid position and terminal orientation with the removed starter, using a straight flange view and a side view parallel to the shaft. Also inspect the locating surface and drive projection. Matching only paint, motor diameter or one mounting ear can hide a difference that affects installation or pinion engagement. Retain 0001 368 085 for shorter machine downtime and receiving review.

Shorter machine downtime: When is a sample order useful for 0001 368 085?

A sample is useful when the old label is incomplete, the application record is uncertain or several similar housings are in local stock. Confirm the sample against mounting, drive and electrical details before scaling the order. Keep the accepted photographs and measurements for later purchasing and receiving checks. Retain the 0001 368 085 result for urgent replacement.

Shorter machine downtime: How can workshops photograph 0001 368 085 for fitment review?

Clean the old unit enough to expose the label, mounting face and terminals, then photograph it square to the flange, from the side and from the terminal end. Include a ruler for key dimensions where practical. Avoid wide-angle close-ups that distort ear spacing or pinion position. File 0001 368 085 with the flange and locating-register fit check.

To support shorter machine downtime, what lead-time details should be stated for the 0001 368 085 order?

Tell Elecdura the quantity, destination, required arrival date and whether the demand supports an urgent repair, normal replenishment or a planned project. Normal preparation is 7–15 days after confirmation, but freight and packing choices depend on the actual schedule and shipment size. Use 0001 368 085 when arranging sample-to-bulk scheduling.

Shorter machine downtime: What information helps review the 0001 368 085 warranty enquiry?

Provide the invoice or lot reference, installation date, Perkins details, service time and a clear description of the symptom. Include photographs of the flange, drive and terminals plus battery and voltage-drop results. Keep the unit assembled until Elecdura confirms the next step under the agreed terms. This supports shorter machine downtime for 0001 368 085.

Get 0001 368 085 Perkins Starter Motor Pricing

Email info@elecdurauto.com with 0001 368 085, Perkins details, old-unit photographs, quantity, delivery country and required date. Elecdura will reply with the matching 24V 4.0kW 10T offer, availability, packing, lead time and freight options.