0-24000-3060 Komatsu Starter Motor 24V 4.5kW 10T

0-24000-3060 Construction Equipment Starter Motor for KOMATSU S6D102

For warehouse planners planning a repeat order, this construction equipment starter motor serves KOMATSU S6D102 replacement demand under reference 0-24000-3060. Its 24V system, 4.5kW rating and 10T drive help importers and distributors identify the required version before discussing volume supply.

For importers setting packaging requirements, accurate version control reduces avoidable returns and mixed stock. The gallery, technical drawing where available, and order information below give commercial and technical teams a shared basis for the RFQ.

0-24000-3060 Starter Motor Specifications and Technical Drawing

For technical buyers reviewing drive-end geometry, the product identity combines 0-24000-3060, KOMATSU S6D102, 24V, 4.5kW and 10T. Keeping those facts together helps buyers separate this starter from adjacent versions.

For engine-parts specialists comparing nearby starter versions, the source-faithful technical drawing records the available mounting information for 0-24000-3060, including Ø127, 47±1 mm; use the printed values together with the product views because the drawing supports comparison and should not be scaled from the screen.

0-24000-3060 Aftermarket Replacement and Application

For product managers confirming the stated application, KOMATSU S6D102 is the stated application for 0-24000-3060. Buyers comparing 0-24000-3060 should confirm that the old starter shares the same 24V system, 4.5kW output and 10T drive before adding the item to a distributor order.

For maintenance suppliers checking application evidence, do not merge a nearly identical-looking unit into this order only because the main number is related. The 10T drive, module 3.175, flange and terminals should agree with the version shown here.

0-24000-3060 Wholesale Supply for Distributors and Importers

For private-label buyers building a new starter range, Elecdura supports repeat-order and new-line sourcing for 0-24000-3060. Commercial planning can cover a 20 pcs MOQ, 7–15 day lead time subject to confirmation, neutral packaging or private-label review, and an 18-month agreed warranty.

For purchasing teams requesting production pricing, available quality support includes armature, solenoid, no-load and load testing. Buyers may define sampling, report format, reference labels, terminal protection and carton marks before production so the shipment can be checked against the approved order specification.

0-24000-3060 Starter Motor Buyer FAQ

How can an importer validate KOMATSU S6D102 before stock is assigned?

For application specialists checking application evidence, KOMATSU S6D102 identifies the intended construction machine family, but it should not be used by itself. Pair the application with 0-24000-3060, the 24V electrical system and the 10-tooth drive. That combination lets purchasing exclude nearby versions used on another engine build, chassis revision or equipment configuration during quotation and schedule review.

How can an importer validate 0-24000-3060 locating face before stock is assigned?

For replacement-parts sellers preparing an OE-based quote, the 0-24000-3060 flange should sit flat against the KOMATSU S6D102 mounting surface without being pulled into place by the bolts. Clean both faces and compare the locating shoulder, hole pattern and any stated diameters. Rocking, a visible gap or bolt misalignment indicates that the version check is incomplete and installation should stop.

What evidence best identifies 0-24000-3060 ring-gear engagement during fitment review?

For service-parts networks separating similar housings, review the 10T pinion, module 3.175, rest position and available axial dimensions as one engagement set. Inspect the ring gear for wear before fitting. A correct bolt pattern cannot protect the gear if pitch or projection differs, so drive geometry should be resolved before the starter is energized.

How can an importer validate Ø127 when checking a replacement proposal?

For importers evaluating a direct replacement, 0-24000-3060 shows Ø127. Measure each diameter at the same shoulder or circle indicated in the drawing, rather than taking an unrelated outside-housing dimension. The locating feature centers the starter at the ring gear, so a diameter mismatch can matter even when the bolt holes appear to align.

How should a distributor confirm 0-24000-3060 carton identification before an installation slot is booked?

For inventory buyers preparing distributor pricing, ask that unit and carton labels repeat the agreed reference, 24V, 4.5kW and 10T where the packaging format permits. Add the customer's barcode and destination marks before production. Clear identification allows distributors to receive, bin and pick this version without opening packaging or relying on a generic starter description.

How should a workshop distinguish 0-24000-3060 drive-end photograph during fitment review?

For maintenance suppliers comparing nearby starter versions, the drive-end image for 0-24000-3060 should be used to count 10 teeth and compare the flange, locating shoulder and pinion rest position. Compare an equally framed drive-end photo of the old unit. A side view alone may hide the deciding tooth and mounting information, so keep the direct drive-end view with the RFQ.

What evidence best identifies 0-24000-3060 rear-terminal photograph during fitment review?

For equipment-parts dealers preparing a technical RFQ, use the rear view of 0-24000-3060 to identify battery and signal terminals, their direction and the clearance around each stud. Match the customer's photograph from the same orientation and consider cable routing in KOMATSU S6D102. A correct drive end with an unusable terminal position is not a complete fitment match.

What evidence best identifies KOMATSU S6D102 cranking condition when the removed unit is available?

For purchasing teams checking version-defining data, before replacing the starter on KOMATSU S6D102, test battery state, voltage drop across positive and ground paths, the start signal and ring-gear condition. Note cranking voltage and any abnormal noise. Those observations help distinguish a supply-circuit or engine-load problem from a fault in the 24V, 4.5kW starter and make a fitment check easier to resolve.

Request a Wholesale Quote for 0-24000-3060 Construction Equipment Starter Motor

For distributors defining label requirements, send 0-24000-3060, the KOMATSU S6D102 application, required quantity, destination and packaging preference. Add old-unit photos when available. Elecdura will review the 24V, 4.5kW, 10T version and prepare a product-specific wholesale quotation.