129698-77010 Yanmar Starter Motor 12V 1.4kW 11T

129698-77010 Agricultural Machinery Starter Motor for YANMAR 3TNV84 (PC30 / PC40)

For importers confirming commercial terms, 129698-77010 is an aftermarket agricultural machinery starter motor for YANMAR 3TNV84 (PC30 / PC40). Its 12V system, 1.4kW output and 11T pinion give agricultural-machinery distributors, importers and engine-parts wholesalers a clear product definition for OE-reference replacement and repeat-order sourcing.

For inventory buyers opening a first wholesale order, importers can use the same reference and specification bundle from enquiry through receiving. That continuity helps sales, purchasing and warehouse teams keep a repeat-order item separate from similar housings with another electrical or drive configuration.

129698-77010 Starter Motor Specifications and Technical Drawing

For engine-parts specialists checking application evidence, the 11T pinion and module 2.54 are important replacement identifiers. Match them with the flange and drive projection to protect the ring gear from an incorrect tooth pitch or engagement depth.

For fleet-parts buyers preparing an OE-based quote, the source-faithful technical drawing records the available mounting information for 129698-77010, including 21±1 mm, 33±1 mm; use the printed values together with the product views because the drawing supports comparison and should not be scaled from the screen.

129698-77010 Aftermarket Replacement and Application

For maintenance suppliers preparing a technical RFQ, match 129698-77010 to YANMAR 3TNV84 (PC30 / PC40) and keep the related numbers 129698-77010, S114-815 on the same enquiry. If the old unit carries another suffix, flange, drive or terminal arrangement, quote it separately until the physical version is confirmed.

For equipment-parts dealers checking version-defining data, the old starter should agree with the approved drive-end, side and rear views. Confirm the 11T pinion and module 2.54, then keep any different flange or terminal layout outside the current commercial line.

129698-77010 Wholesale Supply for Distributors and Importers

For purchasing teams planning a repeat order, Elecdura supports repeat-order and new-line sourcing for 129698-77010. Commercial planning can cover a 20 pcs MOQ, 7–15 day lead time subject to confirmation, neutral packaging or private-label review, and an 18-month agreed warranty.

For distributors setting packaging requirements, the order specification may include armature, solenoid, no-load or load testing together with label and packaging requirements. This gives receiving teams practical points for sampling a batch without treating appearance alone as proof of fitment.

129698-77010 Starter Motor Buyer FAQ

Which specification deserves priority for 129698-77010, S114-815 for a documented fitment decision?

For replacement-parts sellers checking version-defining data, 129698-77010, S114-815 should be treated as one inquiry group only after the actual starter is compared. Ask the customer for the complete label and clear views of the drive end, flange and terminals. If a suffix, housing shape or terminal clocking differs, keep it as a separate priced item instead of assuming that the shared number guarantees interchangeability.

What must be matched before quoting module 2.54 during fitment review?

For service-parts networks confirming electrical ratings, module 2.54 is part of the gear geometry for 129698-77010. Confirm it together with the 11-tooth count and pinion diameter; another module changes tooth pitch even when the number of teeth is unchanged. The old starter or ring-gear specification should therefore support the module match before a substitute is accepted.

Which check should lead flange clocking when confirming the quote position?

For importers checking repeat-order specifications, no separate angular callout is stated for 129698-77010. Align the old and offered starters by the locating face, then photograph bolt positions and terminal clocking from matching viewpoints. This provides a usable orientation check for the purchasing team without assigning an angle taken from another model that only shares a similar flange outline.

Which specification deserves priority for 129698-77010 drive-end photograph when several versions look alike?

For product managers confirming the stated application, the drive-end image for 129698-77010 should be used to count 11 teeth and compare the flange, locating shoulder and pinion rest position. Use a matching frontal view of the starter being replaced. An angled image may conceal the pinion count or flange holes, so ask for a direct view when those details decide the match.

Which detail separates 129698-77010 among Yanmar versions during fitment review?

For maintenance suppliers checking application evidence, 129698-77010 should remain separate from another Yanmar starter whenever voltage, output, tooth count, module, flange geometry or terminal position changes. For this line, retain 12V, 1.4kW and 11T together in the purchasing description. That specification bundle gives sales, warehouse and technical teams one consistent basis for reviewing alternatives.

How can a buyer screen 129698-77010 order testing for a documented fitment decision?

For private-label buyers building a new starter range, Elecdura can discuss armature, solenoid, no-load and load testing for 129698-77010. State the required report format, sampling expectation and acceptance points in the RFQ. Testing should use the stated 12V and 1.4kW configuration, while identity and mounting checks remain separate because electrical results do not prove physical interchangeability.

Which detail separates 12V system compatibility during an application review?

For purchasing teams separating similar housings, 129698-77010 is a 12V starter and must be connected only to the matching machine electrical system. Read the voltage marking on the old unit and verify the battery arrangement before stock is committed. A housing can look correct while the winding and solenoid are designed for another voltage, so appearance must not override the electrical label.

How can a buyer screen 129698-77010 ring-gear engagement when several versions look alike?

For distributors evaluating a direct replacement, review the 11T pinion, module 2.54, rest position and available axial dimensions as one engagement set. Inspect the ring gear for wear before fitting. A correct bolt pattern cannot protect the gear if pitch or projection differs, so drive geometry should be resolved before the starter is energized.

Request a Wholesale Quote for 129698-77010 Agricultural Machinery Starter Motor

For aftermarket product managers updating a customer item master, request pricing for 129698-77010 by sharing the application, quantity, delivery country and any neutral or private-label packaging needs. Clear label, drive-end, flange and terminal photos help confirm the exact starter before the offer is issued.