SAIC Hongyan Truck A/C Compressors

SAIC Hongyan C6 Compressor Sourcing

SAIC Hongyan truck parts buyers need a brand-specific path that still preserves the exact vehicle and compressor configuration. This page supports importers, commercial-vehicle distributors and fleet workshops sourcing an aftermarket SAIC Hongyan A/C compressor for verified truck applications.

For aftermarket procurement, a Hongyan Genlyon C6 application with a 10S15C family, 24V clutch and eight-rib pulley around 143 mm. This combination is more useful than the truck brand alone.

Use the C6 Vehicle Identity in Every Inquiry

Provide the complete SAIC Hongyan model, year, engine and chassis or VIN information when available. Photograph the vehicle data plate and original compressor label before removal.

If the truck has been repaired with another compressor or bracket, note that service history. The current installed drive must be compared with the requested replacement.

Confirm the PV8 143 mm 24V Drive

Count all eight ribs, measure pulley diameter and offset, and read the clutch marking. A 24V 10S15C with another pulley diameter can still produce belt misalignment.

Compare mounting-foot spacing, connector, rear-head orientation and hose ports. Include an installed belt-path photograph to show available clearance.

Wholesale and Fleet RFQ Requirements

Send vehicle identity, compressor family, public references if available, voltage, pulley, mount dimensions, ports, refrigerant and quantity. State destination and required delivery date.

Fleet buyers should separate Hongyan C6 configurations from Shacman, Sinotruk or other Chinese heavy-truck compressor lines. Similar 24V multi-rib units are not interchangeable without complete evidence.

SAIC Hongyan Truck Compressor FAQ

Which truck application is represented?

The available selection includes a SAIC Hongyan Genlyon C6 compressor configuration.

What compressor family is recorded?

The represented product uses a 10S15C family with a 24V clutch.

Why is the 143 mm pulley important?

Diameter and offset affect belt alignment even when the eight-rib profile matches.

Can another Chinese heavy-truck compressor be used?

No assumption should be made; vehicle, mount, drive, connector and ports must all agree.

What if there is no readable part number?

Provide VIN or chassis data, complete photographs and measured pulley and mounting details.

Can several fleet trucks share one quantity line?

Only after their original compressor configurations have been verified as identical.

Request a Hongyan C6 Compressor Quote

Submit the truck and original-unit evidence for cross-checking. Elecdurauto will review the aftermarket SAIC Hongyan A/C compressor requirement and prepare wholesale pricing for the verified PV8 24V configuration.

For fleet and dealer stock, identify the Genlyon C6 line by its complete PV8, 143 mm and 24V specification. Receiving staff should count the ribs, check the clutch marking and compare mount and port photographs before the product enters general Chinese-truck inventory. Keeping the chassis group with the approved compressor record also makes later repeat orders faster without weakening the fitment check.

International orders should use protected ports and a carton label showing Hongyan Genlyon C6, 10S15C, 24V and PV8 143 mm. This gives the destination warehouse a quick first check before matching mounting and port photographs for final allocation. Record any packaging damage before installation.