SANY A/C Compressors

SANY Excavator Compressor Procurement

SANY equipment buyers often search by brand, but the compressor must be verified from the excavator and original unit. This page serves importers, heavy-equipment distributors and fleet workshops sourcing aftermarket SANY excavator A/C compressors without extending one configuration to unrelated SANY trucks or machines.

The construction record in the current range is a 10S15C unit with a 24V clutch, single-A pulley and recorded diameter around 142 mm. Those attributes form the working comparison for this excavator application.

Keep Excavator and Heavy-Truck Demand Separate

SANY manufactures more than one equipment type. A compressor listed for an excavator should not be ordered from a heavy-truck reference, even when voltage or compressor family appears similar. Record the equipment type prominently on every RFQ line.

Provide the excavator model, serial information and installed-unit photographs. If the machine has a replacement bracket or altered hoses, show the current arrangement.

Inspect the Single-A 24V Drive

Confirm the clutch marking, A-section belt, pulley diameter and offset. Measure mounting-ear spacing and compare connector location, rear head and hose ports. A 10S15C family name alone cannot establish mechanical fit.

For incoming inspection, retain a straight-on pulley photo and a rear-head photo with the product record. These views help distinguish variants before they reach a field service team.

Information for a SANY Equipment RFQ

Send machine identity, original label, family, voltage, pulley, mounting dimensions, ports, refrigerant and quantity. State destination and whether demand is for an urgent repair, branch stock or planned fleet maintenance.

When the label is unreadable, measurements and complete images are required. Uncertain items should not be merged into a confirmed 10S15C order simply to meet a purchasing deadline.

SANY Excavator Compressor FAQ

Which construction configuration appears in this range?

A 10S15C, 24V, single-A configuration around 142 mm is associated with a SANY excavator.

Can SANY truck compressor data be used here?

No. Keep truck and excavator applications separate unless product-level evidence proves the same installation.

Is 24V enough to identify the compressor?

No. Family, pulley, mounting, connector and hose-port orientation must also match.

What if the bracket has been changed?

Provide installed photographs and current dimensions so the modified position can be reviewed.

Can fleet quantities be combined?

Yes, but only after every machine in the quantity group is tied to the same verified configuration.

What belongs on the receiving checklist?

Verify label, clutch voltage, pulley, mount, connector, rear head and ports against the approved RFQ line.

Submit a SANY Excavator Inquiry

Send the excavator and original-compressor evidence for technical cross-checking. Elecdurauto will quote the aftermarket SANY A/C compressor configuration that matches the supplied machine and installation details.

For a distributor stocking SANY excavator cooling parts, the commercial risk is not limited to a wrong clutch voltage. A near-match can also create bracket interference, belt noise or hose strain after installation. Ask the workshop to confirm pulley alignment and port access before approving a repeat order, then keep the verified machine group and compressor photographs with the purchasing reference.

Ask for packing that protects the clutch face and capped ports, and require the carton label to repeat the approved machine and drive description. This gives warehouse staff a practical check before dispatching a compressor to a remote jobsite.