6K17A 24V A1 135 mm narrow through-foot Heavy-Duty A/C Compressor for SANY 75 mini excavator

Fleet Replacement 6K17A A/C Compressor for SANY 75 mini excavator

Jobsite repairs leave little room for a second freight cycle, which makes the physical identity of this SANY 75 mini excavator compressor important at quotation stage. Supplied as a complete aftermarket compressor, this 6K17A unit combines narrow through-foot single-A 135 mm 24V rear-flare 6K17A configuration. The fitment record retains 24V, A1 and 135 mm with the application so purchasing and receiving are working from the same build.

For SANY 75 mini excavator, a recognizable housing does not settle the order. Elecdura therefore quotes the 24V, A1 and 135 mm assembly with an image-based check of the head, connector and feet, which is especially useful for planned fleet repairs.

Wholesale A/C Compressor Specifications for SANY 75 mini excavator

For stock control, retain 24V, A1 and 135 mm with the SANY 75 mini excavator application and the complete-assembly description. Shortening the line to 6K17A alone removes the details most likely to separate two look-alike units. Vehicle-system values not shown in the table are confirmed from the specific service documentation for SANY 75 mini excavator with 24V, A1 and 135 mm.

Fleet Fitment Evidence for the SANY 75 mini excavator A/C Compressor

The fitment review should follow the path a technician will use: belt side, electrical side, hose connection and mounting points during the SANY 75 mini excavator 24V, A1 and 135 mm review. Applied to SANY 75 mini excavator, that photo sequence makes a wrong but similar compressor easier to reject before shipping.

Check the 135 mm A-belt clutch and straight rear flare outlets. The same review needs to agree with 24V, A1 and 135 mm. A conflict at either point calls for clarification before the fleet parts team approves a substitute.

Importer Comparison Notes for the SANY 75 mini excavator A/C Compressor

Do not collapse it into the 133 mm left-angle SANY 65C/75 line. Keep that distinction in the fitment record instead of depending on memory. A nearby 6K17A assembly can share the housing outline while changing the belt, voltage or hose position.

Repeat SANY 75 mini excavator orders should carry the same product image and configuration used for the original approval. That record is more dependable than choosing from a shelf of compressors by housing shape alone for SANY 75 mini excavator with 24V, A1 and 135 mm.

Distributor Receiving and Service Notes for This A/C Compressor

Incoming inspection for this 6K17A line can be short and specific: confirm the SANY 75 mini excavator application, 24V, A1 and 135 mm and the visible mounting layout. Those observations protect the SANY 75 mini excavator distributor's stock record and any later fleet claim; receiving should use the 24V, A1 and 135 mm reference.

The old-unit failure provides useful service evidence. Before fitting the 24V, A1 and 135 mm replacement to SANY 75 mini excavator, inspect the belt path, hoses, airflow and circuit condition and correct the fault that could damage the new compressor.

Bulk SANY 75 mini excavator A/C Compressor Supply for Distributors

Elecdura can quote this 6K17A compressor for sample evaluation, distributor restocking and mixed heavy-duty A/C shipments. After the SANY 75 mini excavator application and physical build are approved, qualified volumes can include neutral cartons, buyer-brand labels or agreed packaging artwork.

For pricing, send the required volume and shipping country with the SANY 75 mini excavator application and old-unit image set. If the fleet uses more than one 6K17A build, list each separately so quotation and packing keep the variants apart.

Wholesale 6K17A A/C Compressor Questions from Buyers

Before quantity is committed, these answers help the buyer connect 24V, A1 and 135 mm with fitment evidence and ordering requirements during the SANY 75 mini excavator 24V, A1 and 135 mm review.

Why must the A1 135 mm clutch stay on the RFQ?

Belt section, groove count and diameter affect alignment on SANY 75 mini excavator. A nearby pulley cannot be accepted simply because the 6K17A housing looks familiar.

What identifies this SANY 75 mini excavator A/C compressor?

Describe the unit as the 24V, A1 and 135 mm 6K17A assembly for SANY 75 mini excavator, then attach the reference photos. That is more specific than a model-family number by itself for SANY 75 mini excavator with 24V, A1 and 135 mm.

What should a wholesale RFQ include for this 6K17A compressor?

State the 6K17A application, required volume, shipping country and delivery target. Attach the reference photos and note any neutral or buyer-brand packing request.

What wrong-stock risk applies to this A1 6K17A compressor?

Do not collapse it into the 133 mm left-angle SANY 65C/75 line. The alternative should retain its own image and item code until a separate SANY 75 mini excavator approval is complete.

Can this SANY 75 mini excavator compressor use private-label packing?

The fleet parts team can request neutral or branded packing after fitment approval. Artwork, label content and quantity are handled as commercial requirements for SANY 75 mini excavator with 24V, A1 and 135 mm.

Why does port direction matter on this 6K17A compressor?

A different head can change outlet angle, fitting style or service access during the SANY 75 mini excavator 24V, A1 and 135 mm review. Compare the offered 6K17A port block directly with the removed compressor before shipment.

Which photos help confirm this SANY 75 mini excavator compressor?

Photograph the old 6K17A unit before and after removal. Those images should reveal belt alignment, port direction, connector position and the way it mounts to SANY 75 mini excavator.

How should a buyer confirm the 24V clutch?

Do not infer clutch voltage from housing shape. The reference photos and SANY 75 mini excavator circuit information should both support the 24V unit on the RFQ.

Request a Wholesale 6K17A A/C Compressor Quote

Send the product and program details in one RFQ: SANY 75 mini excavator, 6K17A, 24V, A1 and 135 mm, quantity, destination and packing. Elecdura will use the visible fitment evidence to review the requested complete assembly during the SANY 75 mini excavator 24V, A1 and 135 mm review. Once the physical match is accepted, the same fitment record can support purchasing, receiving and future distributor replenishment.