Harvester A/C Compressors

Harvester A/C Compressors for Seasonal Aftermarket Supply

Harvester cab cooling must remain dependable during short, high-load operating seasons. This category helps agricultural-parts wholesalers, importers and service networks source complete aftermarket A/C compressor assemblies when the machine brand is not enough to identify the installed unit.

Current supply includes 7H15 twin-A 12V configurations with small and large pulley versions. The CB-style head is another required checkpoint, so the two assemblies stay on separate product lines.

Separate Small- and Large-Pulley Harvester Compressors

The represented small-pulley version is near 132 mm, while the large-pulley version is near 152 mm. Both use two A-section grooves and a 12V clutch, but diameter and offset can change belt alignment and bracket clearance.

Measure the removed pulley, photograph the belt path and keep the accepted diameter on the RFQ, carton label and warehouse record.

Confirm the CB Head, Ports and Mounting Geometry

Compare the rear head, suction and discharge connections, connector and mounting ears from individual angles. A matching 7H15 body with another head cannot be treated as an automatic replacement.

Provide the harvester make and model whenever available. If the machine identity is incomplete, accurate physical evidence becomes even more important before a bulk commitment.

Harvester Compressor Stocking for Distributors

Plan preseason inventory by exact compressor version, not by one generic harvester line. State the quantity for each pulley size, destination, delivery window and packaging request.

At receiving, count the grooves, verify 12V, measure the pulley and compare the CB head and mounts with the approved evidence before shelving.

Harvester A/C Compressor FAQ

What distinguishes the two current harvester versions?

They use different pulley diameters, approximately 132 mm and 152 mm, while sharing a twin-A 12V description.

Why should the CB head be recorded?

Head and port geometry control hose connection and clearance, even on the same compressor family.

Can a buyer order by 7H15 alone?

No. Include voltage, pulley, head, connector, mount, machine identity and photographs.

How should mixed harvester demand be quoted?

Use separate lines and quantities for every confirmed physical configuration.

Which photographs help receiving staff?

Provide the clutch face, rear head, both ports, connector, mounting sides and an installed belt view.

Are bulk and private-label orders available?

Wholesale, neutral-pack and suitable private-label programs can be discussed after configuration approval.

Where a distributor serves several harvester brands, record the machine and pulley version in both the purchase order and receiving notes. Keep separate shelf locations for the small- and large-pulley builds. This prevents a correct 152 mm unit from being picked for a 132 mm belt system during peak-season service.

Submit a Harvester A/C Compressor RFQ

Send the machine details, 7H15 family, 12V twin-A pulley size, CB head and mounting evidence, quantity and destination. Elecdura will separate each aftermarket harvester A/C compressor version for a clear wholesale quotation.