Sunward A/C Compressors

Sunward Excavator Compressor Selection

Sunward machinery works in compact and demanding construction environments, where hose routing and bracket clearance can be as important as compressor family. This category helps distributors and importers source aftermarket Sunward A/C compressors from the exact excavator and removed unit.

The verified construction record uses a 10S15L family with a 24V clutch and single-A pulley around 142 mm. It must remain distinct from a same-family single-B configuration used in another equipment application.

Use Pulley Section to Prevent a Near-Match

Measure the A-section pulley and record its diameter and offset. Do not approve a 10S15L unit merely because the housing and voltage match. Belt profile is a separate mechanical requirement.

Check clutch connector, mounting ears, rear head and hose ports. A straight-on installed photograph helps show whether the pulley and bracket occupy the expected plane.

Capture the Sunward Machine Identity

Provide model, build information and serial number when available. Keep the excavator data plate and compressor label in the same evidence set so the quoted item can be traced to a specific machine group.

When a previous repair changed the bracket or hoses, note the modification. Current installation evidence is needed to avoid quoting only from an assumed original layout.

Prepare Distributor and Fleet Requests

List machine identity, family, voltage, A-section pulley, mount dimensions, ports, refrigerant, quantity and destination. State whether the requirement is for one repair or recurring stock.

For fleet demand, separate machines whose labels or pulley measurements differ. A disciplined RFQ protects field technicians from receiving a visually similar single-B unit.

Sunward A/C Compressor FAQ

Which compressor configuration supports this category?

A 10S15L, 24V, single-A compressor around 142 mm is associated with Sunward construction equipment.

Is a single-B 10S15L interchangeable?

No assumption should be made. The belt section and alignment are different procurement checkpoints.

What machine information is needed?

Send the full Sunward model, serial details and data-plate photograph.

Which compressor photos matter most?

Provide label, pulley, mounts, connector, rear head, both ports and an installed view.

Can an unreadable label still be reviewed?

Yes, when machine data, family clues, accurate measurements and complete images are available.

How should multiple excavators be quoted?

Group only identical verified configurations and state quantity separately for every version.

Send a Sunward Equipment RFQ

Provide the original-unit and excavator evidence for cross-checking. Elecdurauto will review the available aftermarket Sunward A/C compressor configuration before issuing wholesale pricing.

Sunward equipment may work far from a distributor warehouse, so a preventable mismatch can cost more than the compressor itself. Before dispatch, compare the supplied unit with the approved front, side and rear views, confirm the 24V clutch and single-A belt alignment, and protect the ports during transport. Fleet buyers can use the same checklist to standardize repeat purchases without assuming that every Sunward excavator shares one compressor.

For export orders, ask the supplier to protect the clutch face and cap both ports. The outer label should repeat the Sunward excavator, 10S15L, 24V and single-A identity so regional warehouses can keep it away from same-family single-B inventory.