JMC Truck A/C Compressors

JMC Truck Compressor Sourcing by Vehicle Series

JMC commercial-vehicle buyers need more than a brand match when purchasing an A/C compressor. Shunda N600, N720 and N900 trucks use a twin-A 10SP13 layout in this product range, while Kaiyun and Kairui demand moves to a compact four-rib 10S15G configuration. Importers and distributors should identify the truck series before comparing the removed unit.

Keeping these two drive groups separate helps purchasing teams avoid a familiar-looking compressor that cannot align with the installed belt, bracket or electrical system.

Separate Shunda N600, N720 and N900 Electrical Demand

The Shunda group uses a two-groove A-section pulley around 122 mm. N600 and N720 applications are represented with 12V clutches, while the N900 configuration is 24V. The shared 10SP13 family and pulley size do not make the voltage variants interchangeable.

Read the clutch marking and inspect the connector before ordering. Record the precise Shunda model, chassis information and any previous compressor replacement so the quotation remains tied to the installed electrical system.

Protect the Kaiyun and Kairui Compact Drive

Kaiyun and Kairui requirements use a 10S15G configuration with a four-rib pulley around 113 mm and a 12V clutch. This is a different purchasing identity from the twin-A Shunda units. Count the ribs, measure pulley diameter and offset, and compare mounting-ear spacing.

Photograph the label, pulley, connector, rear head, hose ports and installed belt path. These views are especially useful when a fleet contains both JMC light trucks and replacement compressors from earlier repairs.

Build a Clear JMC Wholesale RFQ

Send vehicle series, model year, engine, chassis or VIN information, original label, compressor family, voltage, pulley specification, mount dimensions, port orientation, refrigerant, quantity and destination. State whether demand is for an urgent vehicle repair, branch stock or scheduled fleet maintenance.

Put N600, N720, N900 and Kaiyun/Kairui requirements on separate lines. Receiving staff can then compare each delivered compressor with its approved electrical and belt-drive specification before shelving.

JMC Truck A/C Compressor FAQ

Do JMC Shunda N600 and N900 use the same voltage?

No. The represented N600 configuration is 12V, while the N900 configuration is 24V.

Why keep N600 and N720 on separate RFQ lines?

They share useful specifications, but vehicle identity, connector, mount and original-unit evidence should still be confirmed independently.

Can a twin-A 10SP13 replace the Kaiyun or Kairui unit?

No automatic substitution should be made; the Kaiyun/Kairui configuration uses a compact four-rib 10S15G drive.

Which photographs are most useful?

Provide the original label, pulley, mounting ears, connector, rear head, hose ports and installed belt path.

Is a JMC model name enough for ordering?

No. Include chassis or VIN details and compare the complete removed compressor specification.

How should a mixed JMC fleet be stocked?

Separate inventory by vehicle series, compressor family, voltage, pulley and verified mounting and port configuration.

Request a JMC Truck Compressor Review

Send the vehicle and original-compressor details for technical cross-checking. Elecdurauto will organize the aftermarket JMC truck A/C compressor quotation around the verified Shunda or Kaiyun/Kairui configuration and the required wholesale quantity.