228000-5000 Komatsu Starter Motor 24V 5.5kW 10T

228000-5000 Construction Equipment Starter Motor for KOMATSU 6D107 (PC200-7 PC200-8)

For regional parts suppliers planning a repeat order, 228000-5000 gives construction-equipment parts distributors, importers and fleet suppliers a defined aftermarket starter motor for KOMATSU 6D107 (PC200-7 PC200-8). The supplied version combines 24V, 5.5kW and 10T for OE-reference matching, wholesale quotation and repeat purchasing.

For aftermarket wholesalers setting packaging requirements, the product is positioned for professional aftermarket supply, with product identification, fitment boundaries, inspection options and commercial terms visible before the buyer requests pricing.

228000-5000 Starter Motor Specifications and Technical Drawing

For product managers reviewing drive-end geometry, this reference group can cover nearby starter versions. Keep 228000-5000, 24V, 5.5kW and 10T together on the RFQ, then compare the flange, drive end and terminal layout before treating another number as a direct replacement.

For maintenance suppliers comparing nearby starter versions, the source-faithful technical drawing records the available mounting information for 228000-5000, including 3×Ø12, 47±1 mm, 90°; use the printed values together with the product views because the drawing supports comparison and should not be scaled from the screen.

228000-5000 Aftermarket Replacement and Application

For fitment reviewers confirming the stated application, this aftermarket starter motor is organized around 228000-5000 for KOMATSU 6D107 (PC200-7 PC200-8). Related numbers remain useful search and purchasing references, but Elecdura treats a changed rating, pinion, flange or terminal layout as a separate version for quotation.

For application specialists checking application evidence, product photos and the stated specifications should be reviewed together. If the old starter uses another pinion, mounting face or rear connection, keep that configuration on a separate RFQ until it is identified.

228000-5000 Wholesale Supply for Distributors and Importers

For sales teams building a new starter range, 228000-5000 is available for professional aftermarket supply to construction-equipment parts distributors, importers and fleet suppliers. Ask for wholesale pricing with quantity, destination and packaging requirements; standard terms are 20 pcs MOQ, 7–15 days after confirmation and 18 months warranty.

For warehouse planners requesting production pricing, the order can specify testing scope, sampling level, label content and packing details. Reference-label, drive-end and terminal-protection photos may also be requested before shipment for the agreed product version.

228000-5000 Starter Motor Buyer FAQ

What must be matched before quoting 5.5kW output on KOMATSU 6D107 (PC200-7 PC200-8) during an application review?

For technical buyers checking application evidence, the 5.5kW rating belongs to the 228000-5000 configuration used for KOMATSU 6D107 (PC200-7 PC200-8). Verify the old-unit rating and investigate battery voltage, cable drop and engine turning resistance before choosing another output. A higher or lower kW figure is not an automatic upgrade; it can indicate a separate starter design with different electrical and mechanical requirements.

How can an importer validate 3×Ø12, 47±1 mm and 90° during an application review?

For engine-parts specialists preparing an OE-based quote, use the supplied technical drawing to compare 3×Ø12, 47±1 mm and 90°. Take each measurement from the same face shown or described, then compare the locating shoulder, bolt pattern and drive-end projection as one set. A single matching diameter is not enough if the hole pattern or axial reach places the pinion differently.

Which detail separates 228000-5000 drive-end photograph during fitment review?

For fleet-parts buyers separating similar housings, the drive-end image for 228000-5000 should be used to count 10 teeth and compare the flange, locating shoulder and pinion rest position. Ask for the replaced starter to be photographed from the corresponding angle. An uneven camera angle can mask the pinion and bolt positions; clear frontal framing supports a better replacement decision.

How can an importer validate 10T and module 3.175 for repeatable sourcing?

For technical sales teams evaluating a direct replacement, the supplied drive uses 10 teeth with module 3.175. Count the old pinion teeth and compare outside diameter, rest position and engagement depth before the PO is released. The 3.175 module is part of the gear definition, so another pitch must not be combined on the combined buying line. This check protects the ring gear from an incorrect mesh.

What must be matched before quoting 24V and 5.5kW during an application review?

For fitment reviewers reviewing drive-end geometry, 228000-5000 is defined as 24V and 5.5kW. Confirm the machine electrical system and the old starter rating together, because the voltage must agree with the machine system while rated output helps meet the engine load. Battery condition, cable size and ground integrity should also suit this rating; a different voltage or output is a separate product, even when the housings appear similar.

What should receiving teams compare on 228000-5000 cartons and units for warehouse identification?

For wholesale program managers opening a first trade order, sample cartons from different positions in the shipment and compare the 228000-5000 labels, 24V marking, 10-tooth pinion, flange shape and terminal protection with the PO specification. Photograph any mixed marking, damaged terminal or different drive end before installation, and isolate those pieces so the rest of the lot can be assessed consistently.

Which specification deserves priority for 228000-5000 inside a mixed starter shipment before an installation slot is booked?

For sales teams confirming an incoming batch, give each carton line its own reference, 24V, 5.5kW and 10T marking. The packing list should preserve those same fields. Receiving can then compare labels and drive-end appearance without opening every carton, while any mixed or unclear unit is isolated for review.

Which specification deserves priority for 228000-5000 among Komatsu versions before an installation slot is booked?

For service-parts networks checking version-defining data, 228000-5000 should remain separate from another Komatsu starter whenever voltage, output, tooth count, module, flange geometry or terminal position changes. For this line, retain 24V, 5.5kW and 10T together in the purchasing description. That specification bundle gives sales, warehouse and technical teams one consistent basis for reviewing alternatives.

Request a Wholesale Quote for 228000-5000 Construction Equipment Starter Motor

For importers defining label requirements, request pricing for 228000-5000 by sharing the application, quantity, delivery country and any neutral or private-label packaging needs. Clear label, drive-end, flange and terminal photos help confirm the exact starter before the offer is issued.