YUNNEI 4100 24V 4.5kW 11T Starter Motor

YUNNEI 4100 24V 4.5kW 11T Heavy-Duty Starter Motor for YUNNEI 4100

For engine-parts specialists defining label requirements, this heavy-duty starter motor serves YUNNEI 4100 replacement demand under reference YUNNEI 4100 24V 4.5kW 11T. Its 24V system, 4.5kW rating and 11T drive help importers and distributors identify the required version before discussing volume supply.

For regional parts suppliers confirming commercial terms, the commercial value is a clearly identified starter rather than a generic visual match. Buyers can use the OE group, application, product images and technical data together, while neutral packaging and private-label review can be discussed for qualified bulk orders.

YUNNEI 4100 24V 4.5kW 11T Starter Motor Specifications and Technical Drawing

For importers matching the unit taken from service, this starter should be identified by the complete mounting set, including 2×Ø13, Ø120, 21±1 mm and 37±1 mm. A single matching dimension does not establish a direct replacement.

For product managers checking application evidence, the source-faithful technical drawing records the available mounting information for YUNNEI 4100 24V 4.5kW 11T, including 2×Ø13, Ø120, 21±1 mm, 37±1 mm; use the printed values together with the product views because the drawing supports comparison and should not be scaled from the screen.

YUNNEI 4100 24V 4.5kW 11T Aftermarket Replacement and Application

For technical sales teams reviewing a replacement proposal, send YUNNEI 4100 24V 4.5kW 11T, the full YUNNEI 4100 description and photos of the starter being removed. These details allow the quotation to stay product-specific when related numbers appear on more than one housing version.

For fitment reviewers preparing a technical RFQ, product photos and the stated specifications should be reviewed together. If the old starter uses another pinion, mounting face or rear connection, keep that configuration on a separate RFQ until it is identified.

YUNNEI 4100 24V 4.5kW 11T Wholesale Supply for Distributors and Importers

For wholesale program managers preparing a volume quote, importers planning YUNNEI 4100 24V 4.5kW 11T stock can request volume pricing, neutral or reviewed private-label packaging and agreed inspection records. Standard guidance is 20 pcs minimum, 7–15 days after confirmation and 18 months warranty under sales terms.

For sales teams planning a repeat order, the order specification may include armature, solenoid, no-load or load testing together with label and packaging requirements. This gives receiving teams practical points for sampling a batch without treating appearance alone as proof of fitment.

YUNNEI 4100 24V 4.5kW 11T Starter Motor Buyer FAQ

Which specification deserves priority for YUNNEI 4100 24V 4.5kW 11T cartons and units when confirming the quote position?

For distributors updating a customer item master, sample cartons from different positions in the shipment and compare the YUNNEI 4100 24V 4.5kW 11T labels, 24V marking, 11-tooth pinion, flange shape and terminal protection with the buying description. Photograph any mixed marking, damaged terminal or different drive end prior to fitting, and isolate those pieces so the rest of the lot can be assessed consistently.

How should a distributor confirm YUNNEI 4100 24V 4.5kW 11T when preparing a fitment check?

For technical buyers checking version-defining data, YUNNEI 4100 24V 4.5kW 11T should be treated as one inquiry group only after the real component is compared. Ask the customer for the complete label and clear views of the drive end, flange and terminals. If a suffix, housing shape or terminal clocking differs, keep it as a separate quoted item instead of assuming that the shared number guarantees interchangeability.

Which detail separates 21±1 mm and 37±1 mm before a purchase order is released?

For engine-parts specialists confirming electrical ratings, use 21±1 mm and 37±1 mm when comparing YUNNEI 4100 24V 4.5kW 11T. Measure from the drawing's indicated faces and keep pinion rest position separate from overall body length. These axial values influence how the drive sits and engages, so the set should agree with the removed starter before a fleet or distributor quantity is released.

What must be matched before quoting 2×Ø13 before stock is assigned?

For fleet-parts buyers checking repeat-order specifications, the drawing lists 2×Ø13 for YUNNEI 4100 24V 4.5kW 11T. Count the holes, measure their diameters and compare their positions from the locating face. A matching outer housing does not compensate for a hole pattern that will not seat squarely, so flange geometry should pass before the starter reaches the installation bay.

What should receiving teams compare on YUNNEI 4100 24V 4.5kW 11T ring-gear engagement for a documented fitment decision?

For technical sales teams matching the starter removed from the machine, review the 11T pinion, module 3, rest position and available axial dimensions as one engagement set. Inspect the ring gear for wear before fitting. A correct bolt pattern cannot protect the gear if pitch or projection differs, so drive geometry should be resolved before the starter is energized.

What should receiving teams compare on YUNNEI 4100 24V 4.5kW 11T stock identification when several versions look alike?

For sourcing managers reviewing customer demand, label the storage location with YUNNEI 4100 24V 4.5kW 11T, 24V, 4.5kW and 11T, and keep a verified drive-end and rear-view image with the item master. Do not combine nearly identical-looking Yunnei units when a module, mounting reference or terminal orientation differs. Clear version separation supports faster picking and reduces returns caused by near-match stock.

What should receiving teams compare on YUNNEI 4100 24V 4.5kW 11T rear-terminal photograph for a documented fitment decision?

For application specialists preparing an OE-based quote, use the rear view of YUNNEI 4100 24V 4.5kW 11T to identify battery and signal terminals, their direction and the clearance around each stud. Match the customer's photograph from the same orientation and consider cable routing in YUNNEI 4100. A correct drive end with an unusable terminal position is not a complete fitment match.

What should receiving teams compare on 11T and module 3 when several versions look alike?

For replacement-parts sellers separating similar housings, the supplied drive uses 11 teeth with module 3. Count the old pinion teeth and compare outside diameter, rest position and engagement depth before ordering. The 3 module is part of the gear definition, so another pitch must not be combined on the combined buying line. This check protects the ring gear from an incorrect mesh.

Request a Wholesale Quote for YUNNEI 4100 24V 4.5kW 11T Heavy-Duty Starter Motor

For warehouse planners setting packaging requirements, send YUNNEI 4100 24V 4.5kW 11T, the YUNNEI 4100 application, required quantity, destination and packaging preference. Add old-unit photos when available. Elecdura will review the 24V, 4.5kW, 11T version and prepare a product-specific wholesale quotation.