3708010-KE300 Dongfeng Starter Motor 24V 7.0kW 10T

3708010-KE300 Heavy-Duty Truck Starter Motor for Dongfeng 4H

For distributors preparing a volume quote, 3708010-KE300 is an aftermarket heavy-duty truck starter motor for Dongfeng 4H. Its 24V system, 7.0kW output and 10T pinion give commercial-vehicle distributors, fleet-parts suppliers and importers a clear product definition for OE-reference replacement and repeat-order sourcing.

For aftermarket product managers confirming commercial terms, accurate version control reduces avoidable returns and mixed stock. The gallery, technical drawing where available, and order information below give commercial and technical teams a shared basis for the RFQ.

3708010-KE300 Starter Motor Specifications and Technical Drawing

For replacement-parts sellers matching the unit taken from service, the key version difference is the mounting and housing clocking. Compare 3.5° with the existing starter so the pinion alignment and cable access remain correct.

For service-parts networks reviewing drive-end geometry, the source-faithful technical drawing records the available mounting information for 3708010-KE300, including 3.5°; use the printed values together with the product views because the drawing supports comparison and should not be scaled from the screen.

3708010-KE300 Aftermarket Replacement and Application

For engine-parts specialists reviewing a replacement proposal, match 3708010-KE300 to Dongfeng 4H and keep the related numbers 3708010-KE300 on the same enquiry. If the old unit carries another suffix, flange, drive or terminal arrangement, quote it separately until the physical version is confirmed.

For fleet-parts buyers confirming the stated application, start with the complete reference and application, then compare the 10T drive, flange shape and terminal orientation. A physical difference should be resolved before volume pricing is accepted.

3708010-KE300 Wholesale Supply for Distributors and Importers

For aftermarket wholesalers reviewing customer demand, buyers can discuss 20 pcs MOQ, production planning around 7–15 days after confirmation, neutral cartons or private-label packaging, and an 18-month warranty under the agreed sales terms.

For sourcing managers planning a repeat order, technical and commercial requirements should be confirmed on the same RFQ. Buyers can request suitable electrical tests, product identification photos, customer labels and carton information before the shipment is released.

3708010-KE300 Starter Motor Buyer FAQ

How can an importer validate locating diameter when several versions look alike?

For equipment-parts dealers confirming the stated application, no locating diameter is published for 3708010-KE300. Measure the old starter at the flange shoulder with a caliper and photograph the measuring points. Combine that value with the hole pattern and pinion projection before quoting, because a visually close flange can still center the drive differently and should not inherit dimensions from another model.

How can an importer validate 3.5° when several versions look alike?

For purchasing teams checking application evidence, compare 3.5° with the old flange in the same orientation. Clocking affects body clearance, solenoid position and terminal access even when diameter and hole count match. Use the printed angle or spacing callout rather than estimating from a rotated product photograph, and keep the same datum visible in both images.

What evidence best identifies 3708010-KE300 order testing for warehouse identification?

For distributors building a new starter range, Elecdura can discuss armature, solenoid, no-load and load testing for 3708010-KE300. State the required report format, sampling expectation and acceptance points in the RFQ. Testing should use the stated 24V and 7.0kW configuration, while identity and mounting checks remain separate because electrical results do not prove physical interchangeability.

How should a workshop distinguish 3708010-KE300 drive-end photograph before a purchase order is released?

For technical buyers checking repeat-order specifications, the drive-end image for 3708010-KE300 should be used to count 10 teeth and compare the flange, locating shoulder and pinion rest position. Compare an equally framed drive-end photo of the old unit. An angled image may conceal the pinion count or flange holes, so ask for a direct view when those details decide the match.

How can an importer validate 3708010-KE300 locating face for a documented fitment decision?

For engine-parts specialists matching the old starter, the 3708010-KE300 flange should sit flat against the Dongfeng 4H mounting surface without being pulled into place by the bolts. Clean both faces and compare the locating shoulder, hole pattern and any stated diameters. Rocking, a visible gap or bolt misalignment indicates that the version check is incomplete and installation should stop.

Which comparison prevents a mismatch for 10-tooth pinion identification before accepting a substitute?

For fleet-parts buyers reviewing drive-end geometry, count all 10 teeth on the 3708010-KE300 pinion and compare the gear diameter with the removed starter. Tooth count is a fast screening point, but engagement depth, pitch and rest position still need agreement. If the old unit carries another count, treat it as a different drive version and review the ring gear before fitting.

How should a distributor confirm 3708010-KE300 among Dongfeng versions for a first commercial order?

For technical sales teams comparing nearby starter versions, 3708010-KE300 should remain separate from another Dongfeng starter whenever voltage, output, tooth count, module, flange geometry or terminal position changes. For this line, retain 24V, 7.0kW and 10T together in the purchasing description. That specification bundle gives sales, warehouse and technical teams one consistent basis for reviewing alternatives.

What should purchasing verify first for mounting-hole pattern during fitment review?

For fitment reviewers separating similar housings, A complete mounting-hole callout is not stated for 3708010-KE300. Photograph the old flange straight on and provide hole count, bore diameter and center spacing from the same datum. Those measured points let purchasing separate close housings without transferring hole data from another starter or assuming that a similar silhouette will bolt in.

Request a Wholesale Quote for 3708010-KE300 Heavy-Duty Truck Starter Motor

For wholesale program managers setting packaging requirements, send 3708010-KE300, the Dongfeng 4H application, required quantity, destination and packaging preference. Add old-unit photos when available. Elecdura will review the 24V, 7.0kW, 10T version and prepare a product-specific wholesale quotation.