0-23000-2542-24V-5.5KW-9T-3M Isuzu Starter Motor

0-23000-2542-24V-5.5KW-9T-3M Construction Equipment Starter Motor for ISUZU 4BB1, 4BD1 Komatsu 4D95

For engine-parts specialists preparing distributor pricing, Elecdura offers 0-23000-2542-24V-5.5KW-9T-3M as an aftermarket construction equipment starter motor for ISUZU 4BB1, 4BD1 Komatsu 4D95. The 24V, 5.5kW and 9T configuration is intended for professional replacement sourcing by construction-equipment parts distributors, importers and fleet suppliers.

For regional parts suppliers opening a first distributor purchase, distributors can quote the exact application and starter configuration without turning the page into a generic component guide. Elecdura can also review customer labels, carton requirements and inspection documents for planned orders.

0-23000-2542-24V-5.5KW-9T-3M Starter Motor Specifications and Technical Drawing

For importers checking application evidence, this reference group can cover nearby starter versions. Keep 0-23000-2542-24V-5.5KW-9T-3M, 24V, 5.5kW and 9T together on the RFQ, then compare the flange, drive end and terminal layout before treating another number as a direct replacement.

For product managers confirming electrical ratings, the source-faithful technical drawing records the available mounting information for 0-23000-2542-24V-5.5KW-9T-3M, including 2×Ø13, Ø120; use the printed values together with the product views because the drawing supports comparison and should not be scaled from the screen.

0-23000-2542-24V-5.5KW-9T-3M Aftermarket Replacement and Application

For technical sales teams preparing a technical RFQ, use 0-23000-2542-24V-5.5KW-9T-3M as the primary product identity for ISUZU 4BB1, 4BD1 Komatsu 4D95. The cross-reference group 0-23000-2542-24V-5.5KW-9T-3M, 0-23000-2542, 0-23000-0470 supports aftermarket matching, while the electrical rating and drive-end configuration distinguish the exact version supplied here.

For fitment reviewers evaluating a direct replacement, before a purchase order is released, compare the removed starter's mounting face, 9T drive and terminal direction with the approved gallery. Module 3 is part of the pinion definition. Any conflicting physical feature should remain on a separate RFQ line until the correct replacement is confirmed.

0-23000-2542-24V-5.5KW-9T-3M Wholesale Supply for Distributors and Importers

For wholesale program managers confirming commercial terms, 0-23000-2542-24V-5.5KW-9T-3M is available for professional aftermarket supply to construction-equipment parts distributors, importers and fleet suppliers. Ask for wholesale pricing with quantity, destination and packaging requirements; standard terms are 20 pcs MOQ, 7–15 days after confirmation and 18 months warranty.

For sales teams planning mixed-model inventory, the order specification may include armature, solenoid, no-load or load testing together with label and packaging requirements. This gives receiving teams practical points for sampling a batch without treating appearance alone as proof of fitment.

0-23000-2542-24V-5.5KW-9T-3M Starter Motor Buyer FAQ

Which check should lead 0-23000-2542-24V-5.5KW-9T-3M solenoid and cable routing when several versions look alike?

For distributors checking version-defining data, use the side and rear photographs of 0-23000-2542-24V-5.5KW-9T-3M to check solenoid position, battery-stud direction and start-terminal access in ISUZU 4BB1, 4BD1 Komatsu 4D95. Cables should reach without stretching, sharp bends or contact with hot and moving parts. If the customer's old unit is clocked differently, request an installed photo before the order is assigned.

What evidence best identifies 2×Ø13 and Ø120 when preparing a fitment request?

For technical buyers comparing the flange and terminals, use the supplied technical drawing to compare 2×Ø13 and Ø120. Take each measurement from the same face shown or described, then compare the locating shoulder, bolt pattern and drive-end projection as one set. A single matching diameter is not enough if the hole pattern or axial reach places the pinion differently.

How should a distributor confirm 0-23000-2542-24V-5.5KW-9T-3M carton identification during fitment review?

For engine-parts specialists planning mixed-model inventory, ask that unit and carton labels repeat the agreed reference, 24V, 5.5kW and 9T where the packaging format permits. Add the customer's barcode and destination marks before production. Clear identification allows distributors to receive, bin and pick this version without opening packaging or relying on a generic starter description.

How should a workshop distinguish 0-23000-2542-24V-5.5KW-9T-3M technical claim evidence before an installation slot is booked?

For regional parts suppliers updating a customer item master, retain the unit label, affected quantity, carton condition, installation photos and cranking-voltage results. Add close images of the drive and terminals and note the ISUZU 4BB1, 4BD1 Komatsu 4D95 equipment. This evidence helps separate transport damage, an electrical-system problem, incorrect fitment and a starter fault without relying on a general description of failure.

What evidence best identifies 0-23000-2542-24V-5.5KW-9T-3M stock identification before an installation slot is booked?

For aftermarket wholesalers reviewing customer demand, label the storage location with 0-23000-2542-24V-5.5KW-9T-3M, 24V, 5.5kW and 9T, and keep a verified drive-end and rear-view image with the item master. Do not combine nearly identical-looking Isuzu units when a module, mounting reference or terminal orientation differs. Clear version separation supports faster picking and reduces returns caused by near-match stock.

Which check should lead 5.5kW output on ISUZU 4BB1, 4BD1 Komatsu 4D95 when preparing a service question?

For fitment reviewers confirming electrical ratings, the 5.5kW rating belongs to the 0-23000-2542-24V-5.5KW-9T-3M configuration used for ISUZU 4BB1, 4BD1 Komatsu 4D95. Verify the old-unit rating and investigate battery voltage, cable drop and engine turning resistance before choosing another output. A higher or lower kW figure is not an automatic upgrade; it can indicate a separate starter design with different electrical and mechanical requirements.

How should a workshop distinguish 0-23000-2542-24V-5.5KW-9T-3M, 0-23000-2542, 0-23000-0470 for a documented fitment decision?

For application specialists checking repeat-order specifications, 0-23000-2542-24V-5.5KW-9T-3M, 0-23000-2542, 0-23000-0470 should be treated as one inquiry group only after the real component is compared. Ask the customer for the complete label and clear views of the drive end, flange and terminals. If a suffix, housing shape or terminal clocking differs, keep it as a separate commercial line instead of assuming that the shared number guarantees interchangeability.

How can an importer validate Ø120 when confirming the quoted item?

For replacement-parts sellers matching the starter removed from the machine, 0-23000-2542-24V-5.5KW-9T-3M shows Ø120. Measure each diameter at the same shoulder or circle indicated in the drawing, rather than taking an unrelated outside-housing dimension. The locating feature centers the starter at the ring gear, so a diameter mismatch can matter even when the bolt holes appear to align.

Request a Wholesale Quote for 0-23000-2542-24V-5.5KW-9T-3M Construction Equipment Starter Motor

For warehouse planners updating a customer item master, send 0-23000-2542-24V-5.5KW-9T-3M, 0-23000-2542, 0-23000-0470, the ISUZU 4BB1, 4BD1 Komatsu 4D95 application, required quantity, destination and packaging preference. Add old-unit photos when available. Elecdura will review the 24V, 5.5kW, 9T version and prepare a product-specific wholesale quotation.