0001 108 054 BMW E46 12V 1.4kW Starter Motor Distributor Supply

0001 108 054 BMW E46 Starter Motor Distributor Sourcing

0001 108 054 for BMW E46 is presented for wholesale enquiries with the listed 12V, 1.4kW and 9T specification. That precise identity gives commercial buyers a practical starting point for checking fit, availability, packing and delivery without relying on a broad starter-family description.

Export wholesaler teams handling sample validation should send 0001 108 054, the BMW E46 record, required quantity, destination and delivery timing together. Add straight drive-end and terminal-side photographs of the removed starter. Elecdura can then address faster quotation review, project delivery timing and the correct physical configuration in one useful commercial offer.

0001 108 054 Starter Motor Specifications for B2B Orders

The key fit controls are 9T pinion and 29mm reference, mounting face, drive reach, solenoid position and terminal orientation. Compare them as one geometry set, then check the locating face and drive projection against the removed starter. This is more reliable than matching one bolt hole or using an angled marketplace photograph.

The purchase record should state 12V, 1.4kW and 9T. Also compare solenoid position, battery-stud access and the control terminal with the removed unit. Cable reach or nearby components can make a different terminal orientation unsuitable even when the flange appears correct.

0001 108 054 BMW E46 Starter Motor Reference Control for Distributors

0001 108 054 should remain the lead reference for this BMW E46 line. Cross-references are useful for discovery, but the buyer should accept them only after the 12V, 1.4kW, 9T, mounting and terminal details agree with the removed starter.

For sample validation, keep 0001 108 054, BMW E46, 12V, 1.4kW and 9T on one purchasing record. At goods-in, review carton and item segregation before releasing the lot. This gives the export wholesaler a documented basis for faster quotation review when the next order is raised.

0001 108 054 Starter Motor Wholesale Terms and Supply Support

Elecdura supports qualified wholesale orders from 20 pieces, with normal preparation of 7–15 days after order confirmation and an 18-month warranty under agreed sales terms. Neutral packaging is available, and private-label requirements can be reviewed against order quantity, artwork and delivery schedule.

Demand from an export engine-parts stockroom should keep 0001 108 054 tied to BMW E46. For sample validation, the export wholesaler can use a sample-controlled new line, mark the confirmed voltage and output and review carton and item segregation at goods-in. This supports faster quotation review while keeping project delivery timing visible.

Watch the Elecdura factory video for an overview of starter-motor manufacturing and electrical testing. For purchasing, keep 0001 108 054, BMW E46 and the confirmed physical configuration on the quotation.

0001 108 054 BMW E46 Starter Motor FAQs

How can an export wholesaler source 0001 108 054 for sample validation?

Export wholesaler teams should tie 0001 108 054 to BMW E46, 12V, 1.4kW, 9T and the removed-unit photographs before requesting price. For sample validation, state quantity, destination and delivery timing, then review carton and item segregation. Ask Elecdura to address project delivery timing and faster quotation review in the same quotation.

To support faster quotation review, which physical details matter most when comparing 0001 108 054?

Compare 9T pinion and 29mm reference, mounting face, drive reach, solenoid position and terminal orientation with the removed starter, using a straight flange view and a side view parallel to the shaft. Also inspect the locating surface and drive projection. Matching only paint, motor diameter or one mounting ear can hide a difference that affects installation or pinion engagement. Retain 0001 108 054 for faster quotation review and receiving review.

For project delivery timing, how can workshops photograph 0001 108 054 for fitment review?

Clean the old unit enough to expose the label, mounting face and terminals, then photograph it square to the flange, from the side and from the terminal end. Include a ruler for key dimensions where practical. Avoid wide-angle close-ups that distort ear spacing or pinion position. Retain the 0001 108 054 result for sample validation.

For sample validation handled by an export wholesaler, how should alternate references for 0001 108 054 be handled?

List every complete alternate on a separate RFQ line and state whether it came from a label, invoice or parts record. Compare voltage, output, pinion, mounting and terminals before treating it as interchangeable. If one point remains uncertain, request a separate offer instead of combining the numbers. File 0001 108 054 with the carton and item segregation check.

During sample validation, can 0001 108 054 be supplied with private-label packaging?

Neutral packaging is available, and private-label requirements can be reviewed for qualified orders. Send the expected quantity, artwork, label fields, carton preference and destination early. Elecdura will confirm what can be supported, any additional preparation and the effect on lead time before the order is finalized. Use 0001 108 054 when arranging project delivery timing.

During sample validation, what lead-time details should be stated for the 0001 108 054 order?

Tell Elecdura the quantity, destination, required arrival date and whether the demand supports an urgent repair, normal replenishment or a planned project. Normal preparation is 7–15 days after confirmation, but freight and packing choices depend on the actual schedule and shipment size. This supports faster quotation review for 0001 108 054.

Carton and item segregation check: How should 12V be confirmed for 0001 108 054?

Check the machine electrical system, old-starter label and service record before ordering. Keep 1.4kW, 9T and the terminal arrangement in the same comparison. A starter can have a similar flange but the wrong voltage, output or cable layout, so these facts should be confirmed together. Keep 0001 108 054 traceable through sample validation.

Carton and item segregation check: What information helps review the 0001 108 054 warranty enquiry?

Provide the invoice or lot reference, installation date, BMW E46 details, service time and a clear description of the symptom. Include photographs of the flange, drive and terminals plus battery and voltage-drop results. Keep the unit assembled until Elecdura confirms the next step under the agreed terms. Link 0001 108 054 photographs to the carton and item segregation record.

Ask for 0001 108 054 B2B Starter Motor Supply Terms

Email info@elecdurauto.com with 0001 108 054, BMW E46 details, old-unit photographs, quantity, delivery country and required date. Elecdura will reply with the matching 12V 1.4kW 9T offer, availability, packing, lead time and freight options.