M008T75171-12V-2.2KW-13T-2.54M Caterpillar Starter Motor

M008T75171-12V-2.2KW-13T-2.54M Construction Equipment Starter Motor for C2.4 DI (Caterpillar 305.5E2)

For aftermarket wholesalers preparing a volume quote, this aftermarket construction equipment starter motor is specified for C2.4 DI (Caterpillar 305.5E2) with 12V, 2.2kW and 13T. The page keeps the replacement identity, technical definition and bulk order information in one place.

For sourcing managers confirming commercial terms, distributors can quote the exact application and starter configuration without turning the page into a generic component guide. Elecdura can also review customer labels, carton requirements and inspection documents for planned orders.

M008T75171-12V-2.2KW-13T-2.54M Starter Motor Specifications and Technical Drawing

For maintenance suppliers matching the starter removed from the machine, because no dimensional drawing is available for this version, the approved product views, full reference and 12V 2.2kW 13T specification should be compared with the starter being replaced. Customer measurements can then complete the fitment review without introducing unverified dimensions.

For equipment-parts dealers reviewing drive-end geometry, A dimensional drawing was not supplied for M008T75171-12V-2.2KW-13T-2.54M. For a fitment enquiry, provide straight-on images of the mounting face and drive end plus the locating diameter, hole spacing, pinion projection and terminal direction measured from the starter being replaced.

M008T75171-12V-2.2KW-13T-2.54M Aftermarket Replacement and Application

For application specialists reviewing a replacement proposal, use M008T75171-12V-2.2KW-13T-2.54M as the primary product identity for C2.4 DI (Caterpillar 305.5E2). The cross-reference group M008T75171-12V-2.2KW-13T-2.54M, M008T75171, 32CC66-01200 supports aftermarket matching, while the electrical rating and drive-end configuration distinguish the exact version supplied here.

For replacement-parts sellers confirming the stated application, use the gallery to compare the flange, 13T pinion and rear connections before approving the order. Keep module 2.54 with the tooth count. A changed mounting or terminal feature should be quoted as another starter version.

M008T75171-12V-2.2KW-13T-2.54M Wholesale Supply for Distributors and Importers

For warehouse planners reviewing customer demand, importers planning M008T75171-12V-2.2KW-13T-2.54M stock can request volume pricing, neutral or reviewed private-label packaging and agreed inspection records. Standard guidance is 20 pcs minimum, 7–15 days after confirmation and 18 months warranty under sales terms.

For importers building a new starter range, define the reference group, accepted product version, inspection request and packaging standard before production. Those records help both sides manage replenishment and resolve any receiving question efficiently.

M008T75171-12V-2.2KW-13T-2.54M Starter Motor Buyer FAQ

What should purchasing verify first for C2.4 DI (Caterpillar 305.5E2) for a documented fitment decision?

For engine-parts specialists confirming the stated application, C2.4 DI (Caterpillar 305.5E2) identifies the intended construction machine family, but it should not be used by itself. Pair the application with M008T75171-12V-2.2KW-13T-2.54M, the 12V electrical system and the 13-tooth drive. That combination lets purchasing exclude nearby versions used on another engine build, chassis revision or equipment configuration before price and delivery are finalized.

How should a workshop distinguish 13-tooth pinion identification before accepting a substitute?

For fleet-parts buyers checking application evidence, count all 13 teeth on the M008T75171-12V-2.2KW-13T-2.54M pinion and compare the gear diameter with the removed starter. Tooth count is a fast screening point, but engagement depth, pitch and rest position still need agreement. If the old unit carries another count, treat it as a different drive version and review the ring gear before fitting.

What evidence best identifies M008T75171-12V-2.2KW-13T-2.54M carton identification for a first distributor purchase?

For aftermarket wholesalers building a new starter range, ask that unit and carton labels repeat the agreed reference, 12V, 2.2kW and 13T where the packaging format permits. Add the customer's barcode and destination marks before production. Clear identification allows distributors to receive, bin and pick this version without opening packaging or relying on a generic starter description.

Which comparison prevents a mismatch for M008T75171-12V-2.2KW-13T-2.54M order testing for warehouse identification?

For sourcing managers setting packaging requirements, Elecdura can discuss armature, solenoid, no-load and load testing for M008T75171-12V-2.2KW-13T-2.54M. State the required report format, sampling expectation and acceptance points in the RFQ. Testing should use the stated 12V and 2.2kW configuration, while identity and mounting checks remain separate because electrical results do not prove physical interchangeability.

What should receiving teams compare on M008T75171-12V-2.2KW-13T-2.54M drive-end photograph before a purchase order is released?

For application specialists matching the original unit in hand, the drive-end image for M008T75171-12V-2.2KW-13T-2.54M should be used to count 13 teeth and compare the flange, locating shoulder and pinion rest position. Use the same viewing angle when recording the unit taken from service. An oblique view can make the pinion and hole pattern difficult to judge, so obtain a square-on drive-end photo.

Which check should lead M008T75171-12V-2.2KW-13T-2.54M replenishment when confirming the quoted item?

For sales teams preparing distributor pricing, keep M008T75171-12V-2.2KW-13T-2.54M, 12V, 2.2kW, 13T, the application description and the agreed packaging on the same replenishment line. Add dated photos when the equipment fleet changes or a different old starter appears. This gives purchasing and warehouse teams enough detail to avoid silently merging a new version into established stock.

Which comparison prevents a mismatch for M008T75171-12V-2.2KW-13T-2.54M stock identification before stock is assigned?

For warehouse planners opening a first trade order, label the storage location with M008T75171-12V-2.2KW-13T-2.54M, 12V, 2.2kW and 13T, and keep a verified drive-end and rear-view image with the item master. Do not combine close-looking Caterpillar units when a module, mounting reference or terminal orientation differs. Clear version separation supports faster picking and reduces returns caused by near-match stock.

Which detail separates mounting-hole pattern during fitment review?

For importers preparing a technical RFQ, A complete mounting-hole callout is not stated for M008T75171-12V-2.2KW-13T-2.54M. Photograph the old flange straight on and provide hole count, bore diameter and center spacing from the same datum. Those measured points let purchasing separate close housings without transferring hole data from another starter or assuming that a similar silhouette will bolt in.

Request a Wholesale Quote for M008T75171-12V-2.2KW-13T-2.54M Construction Equipment Starter Motor

For inventory buyers setting packaging requirements, to source M008T75171-12V-2.2KW-13T-2.54M for a distributor or importer program, send the OE group, C2.4 DI (Caterpillar 305.5E2), planned volume and destination. Elecdura will confirm the quoted starter configuration, commercial terms and available inspection support.