438000-2851 Caterpillar Starter Motor 24V 5.0kW 10T

438000-2851 Construction Equipment Starter Motor for CAT C4.4

For distributors building a new starter range, Elecdura offers 438000-2851 as an aftermarket construction equipment starter motor for CAT C4.4. The 24V, 5.0kW and 10T configuration is intended for professional replacement sourcing by construction-equipment parts distributors, importers and fleet suppliers.

For aftermarket product managers setting packaging requirements, accurate version control reduces avoidable returns and mixed stock. The gallery, technical drawing where available, and order information below give commercial and technical teams a shared basis for the RFQ.

438000-2851 Starter Motor Specifications and Technical Drawing

For replacement-parts sellers comparing the flange and terminals, because no dimensional drawing is available for this version, the approved product views, full reference and 24V 5.0kW 10T specification should be compared with the starter being replaced. Customer measurements can then complete the fitment review without introducing unverified dimensions.

For service-parts networks reviewing a replacement proposal, A dimensional drawing was not supplied for 438000-2851. For a fitment enquiry, provide straight-on images of the mounting face and drive end plus the locating diameter, hole spacing, pinion projection and terminal direction measured from the starter being replaced.

438000-2851 Aftermarket Replacement and Application

For engine-parts specialists matching the starter removed from the machine, this aftermarket starter motor is organized around 438000-2851 for CAT C4.4. Related numbers remain useful search and purchasing references, but Elecdura treats a changed rating, pinion, flange or terminal layout as a separate version for quotation.

For fleet-parts buyers reviewing drive-end geometry, the existing starter should agree with the approved drive-end, side and rear views. Confirm the 10T pinion and module 3.175, then keep any different flange or terminal layout outside the current quote position.

438000-2851 Wholesale Supply for Distributors and Importers

For aftermarket wholesalers opening a first B2B purchase, wholesale enquiries for 438000-2851 can combine product matching with packaging and inspection planning. Elecdura offers neutral packaging and private-label review for qualified orders, with 20 pcs MOQ, 7–15 days subject to confirmation and an 18-month warranty under agreed terms.

For sourcing managers requesting production pricing, technical and commercial requirements should be confirmed on the same RFQ. Buyers can request suitable electrical tests, product identification photos, customer labels and carton information before the shipment is released.

438000-2851 Starter Motor Buyer FAQ

How should a workshop distinguish 438000-2851 replenishment when preparing a product query?

For private-label buyers preparing distributor pricing, keep 438000-2851, 24V, 5.0kW, 10T, the application description and the agreed packaging on the same replenishment line. Add dated photos when the equipment fleet changes or a different starter being replaced appears. This gives purchasing and warehouse teams enough detail to avoid silently merging a new version into established stock.

What evidence best identifies module 3.175 before an installation slot is booked?

For purchasing teams comparing nearby starter versions, module 3.175 is part of the gear geometry for 438000-2851. Confirm it together with the 10-tooth count and pinion diameter; another module changes tooth pitch even when the number of teeth is unchanged. The old starter or ring-gear specification should therefore support the module match before a substitute is accepted.

Which check should lead 438000-2851 inside a mixed starter shipment before an installation slot is booked?

For distributors confirming an incoming batch, give each carton line its own reference, 24V, 5.0kW and 10T marking. The packing list should preserve those same fields. Receiving can then compare labels and drive-end appearance without opening every carton, while any mixed or unclear unit is isolated for review.

What should purchasing verify first for 438000-2851 cartons and units for warehouse identification?

For aftermarket product managers defining label requirements, sample cartons from different positions in the shipment and compare the 438000-2851 labels, 24V marking, 10-tooth pinion, flange shape and terminal protection with the PO specification. Photograph any mixed marking, damaged terminal or different drive end ahead of installation, and isolate those pieces so the rest of the lot can be assessed consistently.

Which comparison prevents a mismatch for 438000-2851 label and suffix during fitment review?

For engine-parts specialists comparing the flange and terminals, photograph the complete old-unit label for 438000-2851, including every prefix, suffix and separator. Shortened numbers can group starters that differ in voltage, output, drive or housing. Pair the label with a front and rear view, then retain the full marking in the RFQ and purchase order so later receiving checks use the same identity.

Which specification deserves priority for CAT C4.4 before stock is assigned?

For fleet-parts buyers reviewing a replacement proposal, CAT C4.4 identifies the intended construction machine family, but it should not be used by itself. Pair the application with 438000-2851, the 24V electrical system and the 10-tooth drive. That combination lets purchasing exclude nearby versions used on another engine build, chassis revision or equipment configuration before price and delivery are finalized.

What evidence best identifies 10-tooth pinion identification for a documented fitment decision?

For technical sales teams confirming the stated application, count all 10 teeth on the 438000-2851 pinion and compare the gear diameter with the removed starter. Tooth count is a fast screening point, but engagement depth, pitch and rest position still need agreement. If the old unit carries another count, treat it as a different drive version and review the ring gear before fitting.

How should a distributor confirm 438000-2851 rear-terminal photograph during fitment review?

For fitment reviewers checking version-defining data, use the rear view of 438000-2851 to identify battery and signal terminals, their direction and the clearance around each stud. Match the customer's photograph from the same orientation and consider cable routing in CAT C4.4. A correct drive end with an unusable terminal position is not a complete fitment match.

Request a Wholesale Quote for 438000-2851 Construction Equipment Starter Motor

For wholesale program managers defining label requirements, provide 438000-2851, CAT C4.4, expected order quantity and destination. Include photos or measurements when the existing starter differs in suffix or mounting appearance, and Elecdura will review the correct version before pricing.