1993918 Caterpillar 325 8.5kW Starter Motor B2B Supply

1993918 Caterpillar 325 Starter Motor Procurement Overview

This 1993918 for Caterpillar 325 product line is aimed at B2B buyers handling starter demand. The 24V, 8.5kW, 12T specification helps separate this configuration from related units when several similar starters pass through the same parts counter.

When asking for price, identify the Caterpillar 325 model or engine as precisely as possible and keep 1993918 unshortened. State order quantity, destination and timing, then attach front, side and terminal views of the removed unit so commercial terms can be connected to the correct physical starter.

1993918 Starter Motor Specifications for B2B Orders

The key fit controls are 12T drive, mounting type, drive-end reach and terminal arrangement. Compare them as one geometry set, then check the locating face and drive projection against the removed starter. This is more reliable than matching one bolt hole or using an angled marketplace photograph.

The 8.5kW output and 12T drive belong together with 24V. Record all three rather than quoting power alone, and include a terminal-side photograph so the B+ cable, control wire and nearby clearances can be reviewed before shipment.

1993918 Cross-Reference Handling for Wholesale Supply

On cartons, purchase orders and customer quotations, retain the complete 1993918 string. Where 1993918 is also supplied, show each number in full rather than compressing them into one broad interchange statement; the application and unit still require a complete match.

For this excavator requirement, purchasing teams should state the required output and physical checks on the RFQ so the shared number does not collapse two variants. Keep the confirmed Caterpillar 325 details, product photographs and received lot beside the item record so a later order can be compared with the same physical and commercial reference.

1993918 B2B Starter Motor Supply for Caterpillar 325

Buyers can request neutral packing or discuss private-label presentation for suitable volumes. The usual minimum is 20 pieces and lead time is normally 7–15 days after confirmation, while freight options are selected from the destination, carton quantity and required arrival date.

Branch coverage, supported machine count and normal lead time are more useful than a broad annual estimate. Share those figures for Caterpillar 325 so inventory can reflect both routine consumption and the consequences of an unexpected no-start event.

The video below introduces Elecdura starter-motor production and electrical testing for B2B supply. Buyers can review factory capability while using the 1993918 application and specification shown above for their own product comparison.

1993918 Caterpillar 325 Starter Motor FAQs

When the removed starter is available, how should branches keep 1993918 8.5kW separate from similar starters?

Use the full reference, Caterpillar 325 application and core specification on the internal item label. Store the confirmed product photographs with the ERP record and avoid abbreviating the number. Receiving staff can then compare each new lot with the same documented configuration before distributing it to branches. The 1993918 8.5kW result should remain traceable to the 24V 8.5kW 12T configuration.

For a planned Caterpillar 325 order, why should Caterpillar 325 stay on the 1993918 8.5kW order line?

The application gives purchasing and receiving teams context that a reference alone may not provide. Keeping Caterpillar 325, the electrical rating, pinion and confirmed photographs together makes repeat ordering clearer and reduces the chance that a visually related starter from another machine or engine family is substituted. Record the 1993918 8.5kW outcome beside the Caterpillar 325 application and received lot.

For a planned Caterpillar 325 order, how should 24V be confirmed for 1993918 8.5kW?

Check the machine electrical system, old-starter label and service record before ordering. Keep 8.5kW, 12T and the terminal arrangement in the same comparison. A starter can have a similar flange but the wrong voltage, output or cable layout, so these facts should be confirmed together. Record the 1993918 8.5kW outcome beside the Caterpillar 325 application and received lot.

For Caterpillar 325 buyers, what should receiving staff inspect on a 1993918 8.5kW shipment?

Confirm carton count, labels and visible condition before sampling. On selected units, compare the pinion, mounting face, solenoid and terminals with the confirmed record. Isolate any damaged or different unit with carton and lot photographs before the remainder is released to normal Caterpillar 325 inventory. Retain the 8.5kW 12T specification with the 1993918 8.5kW decision.

When the removed starter is available, which physical details matter most when comparing 1993918 8.5kW?

Compare 12T drive, mounting type, drive-end reach and terminal arrangement with the removed starter, using a straight flange view and a side view parallel to the shaft. Also inspect the locating surface and drive projection. Matching only paint, motor diameter or one mounting ear can hide a difference that affects installation or pinion engagement. The 1993918 8.5kW result should remain traceable to the 24V 8.5kW 12T configuration.

For Caterpillar 325 buyers, how should alternate references for 1993918 8.5kW be handled?

List every complete alternate on a separate RFQ line and state whether it came from a label, invoice or parts record. Compare voltage, output, pinion, mounting and terminals before treating it as interchangeable. If one point remains uncertain, request a separate offer instead of combining the numbers. Retain the 8.5kW 12T specification with the 1993918 8.5kW decision.

For a planned Caterpillar 325 order, what lead-time details should be stated for a 1993918 8.5kW order?

Tell Elecdura the quantity, destination, required arrival date and whether the demand supports an urgent repair, normal replenishment or a planned project. Normal preparation is 7–15 days after confirmation, but freight and packing choices depend on the actual schedule and shipment size. Record the 1993918 8.5kW outcome beside the Caterpillar 325 application and received lot.

What information helps review a 1993918 8.5kW warranty enquiry?

Provide the invoice or lot reference, installation date, Caterpillar 325 details, service time and a clear description of the symptom. Include photographs of the flange, drive and terminals plus battery and voltage-drop results. Keep the unit assembled until Elecdura confirms the next step under the agreed terms. Keep the result under the complete 1993918 8.5kW item record.

Ask for 1993918 B2B Starter Motor Supply Terms

Email info@elecdurauto.com with 1993918, Caterpillar 325 details, old-unit photographs, quantity, delivery country and required date. Elecdura will reply with the matching 24V 8.5kW 12T offer, availability, packing, lead time and freight options.