438000-4441 Caterpillar Starter Motor 24V 6.0kW 10T

438000-4441 Construction Equipment Starter Motor for CAT C7.1 (electronic-injection reversed-head version)

For warehouse planners building a new starter range, 438000-4441 gives construction-equipment parts distributors, importers and fleet suppliers a defined aftermarket starter motor for CAT C7.1 (electronic-injection reversed-head version). The supplied version combines 24V, 6.0kW and 10T for OE-reference matching, wholesale quotation and repeat purchasing.

For importers requesting production pricing, the goal is a repeatable supply line: one agreed product identity, one packaging definition and one set of incoming checks. This is useful for importers building category coverage as well as fleet suppliers replenishing an existing starter reference.

438000-4441 Starter Motor Specifications and Technical Drawing

For technical buyers comparing the flange and terminals, because no dimensional drawing is available for this version, the approved product views, full reference and 24V 6.0kW 10T specification should be compared with the starter being replaced. Customer measurements can then complete the fitment review without introducing unverified dimensions.

For engine-parts specialists reviewing a replacement proposal, A dimensional drawing was not supplied for 438000-4441. For a fitment enquiry, provide straight-on images of the mounting face and drive end plus the locating diameter, hole spacing, pinion projection and terminal direction measured from the starter being replaced.

438000-4441 Aftermarket Replacement and Application

For product managers matching the original unit in hand, CAT C7.1 (electronic-injection reversed-head version) is the stated application for 438000-4441. Buyers comparing 438000-4441, 488-2807 should confirm that the starter being replaced shares the same 24V system, 6.0kW output and 10T drive before adding the item to a distributor order.

For maintenance suppliers reviewing drive-end geometry, product photos and the stated specifications should be reviewed together. If the old starter uses another pinion, mounting face or rear connection, keep that configuration on a separate RFQ until it is identified.

438000-4441 Wholesale Supply for Distributors and Importers

For private-label buyers opening a first wholesale order, importers planning 438000-4441 stock can request volume pricing, neutral or reviewed private-label packaging and agreed inspection records. Standard guidance is 20 pcs minimum, 7–15 days after confirmation and 18 months warranty under sales terms.

For purchasing teams confirming an incoming batch, available quality support includes armature, solenoid, no-load and load testing. Buyers may define sampling, report format, reference labels, terminal protection and carton marks before production so the shipment can be checked against the approved order specification.

438000-4441 Starter Motor Buyer FAQ

Which detail separates mounting-hole pattern when preparing a service question?

For application specialists reviewing drive-end geometry, A complete mounting-hole callout is not stated for 438000-4441. Photograph the old flange straight on and provide hole count, bore diameter and center spacing from the same datum. Those measured points let purchasing separate close housings without transferring hole data from another starter or assuming that a similar silhouette will bolt in.

How should a distributor confirm 438000-4441 without a supplied drawing before accepting a substitute?

For replacement-parts sellers comparing nearby starter versions, because this item has no supplier dimensional drawing, send straight-on photographs of the mounting face and drive end with a ruler or caliper reference. Include bolt-hole spacing, locating diameter, pinion projection and terminal orientation. Elecdura can then review the same physical points before quoting, without inventing dimensions that are not stated for 438000-4441.

What evidence best identifies 438000-4441 inside a mixed starter shipment when checking a replacement proposal?

For warehouse planners confirming an incoming batch, give each carton line its own reference, 24V, 6.0kW and 10T marking. The packing list should preserve those same fields. Receiving can then compare labels and drive-end appearance without opening every carton, while any mixed or unclear unit is isolated for review.

Which comparison prevents a mismatch for 438000-4441 stock identification before accepting a substitute?

For importers preparing a volume quote, label the storage location with 438000-4441, 24V, 6.0kW and 10T, and keep a verified drive-end and rear-view image with the item master. Do not combine close-looking Caterpillar units when a module, mounting reference or terminal orientation differs. Clear version separation supports faster picking and reduces returns caused by near-match stock.

How should a distributor confirm 438000-4441 solenoid and cable routing when confirming the RFQ entry?

For product managers comparing the flange and terminals, use the side and rear photographs of 438000-4441 to check solenoid position, battery-stud direction and start-terminal access in CAT C7.1 (electronic-injection reversed-head version). Cables should reach without stretching, sharp bends or contact with hot and moving parts. If the customer's old unit is clocked differently, request an installed photo before the order is assigned.

What should receiving teams compare on CAT C7.1 (electronic-injection reversed-head version) production changes when confirming the quoted item?

For maintenance suppliers reviewing a replacement proposal, CAT C7.1 (electronic-injection reversed-head version) may appear across equipment years or engine revisions, so the application name is an entry point rather than the sole proof of fitment. Match 438000-4441, 24V, 6.0kW and 10T to the old starter. A changed suffix, flange or terminal layout should open a separate review for that machine.

Which comparison prevents a mismatch for 438000-4441 order testing for a first stocking order?

For private-label buyers updating a customer item master, Elecdura can discuss armature, solenoid, no-load and load testing for 438000-4441. State the required report format, sampling expectation and acceptance points in the RFQ. Testing should use the stated 24V and 6.0kW configuration, while identity and mounting checks remain separate because electrical results do not prove physical interchangeability.

What should receiving teams compare on 438000-4441 label and suffix when confirming the offer line?

For purchasing teams checking application evidence, photograph the complete old-unit label for 438000-4441, including every prefix, suffix and separator. Shortened numbers can group starters that differ in voltage, output, drive or housing. Pair the label with a front and rear view, then retain the full marking in the RFQ and purchase order so later receiving checks use the same identity.

Request a Wholesale Quote for 438000-4441 Construction Equipment Starter Motor

For distributors preparing a volume quote, prepare the RFQ with 438000-4441, 488-2807, the complete application, quantity, target delivery and packaging requirements. We will respond with the defined 24V 6.0kW 10T starter motor line rather than a generic substitute.