K2305-3708100 Yuchai Starter Motor 24V 8.5kW 11T

K2305-3708100 Agricultural Machinery Starter Motor for YUCHAI 6K10

For engine-parts specialists requesting production pricing, K2305-3708100 is an aftermarket agricultural machinery starter motor for YUCHAI 6K10. Its 24V system, 8.5kW output and 11T pinion give agricultural-machinery distributors, importers and engine-parts wholesalers a clear product definition for OE-reference replacement and repeat-order sourcing.

For regional parts suppliers defining label requirements, this page is designed to support a distributor decision: identify the correct replacement, confirm the key specification, define packaging and inspection needs, and request one consistent quotation for the required quantity.

K2305-3708100 Starter Motor Specifications and Technical Drawing

For importers checking repeat-order specifications, the 11T pinion and module 3.5 are important replacement identifiers. Match them with the flange and drive projection to protect the ring gear from an incorrect tooth pitch or engagement depth.

For product managers confirming the stated application, the source-faithful technical drawing records the available mounting information for K2305-3708100, including 3×Ø13, Ø127, 33.5±1 mm; use the printed values together with the product views because the drawing supports comparison and should not be scaled from the screen.

K2305-3708100 Aftermarket Replacement and Application

For technical sales teams comparing the flange and terminals, the replacement search starts with K2305-3708100 and the YUCHAI 6K10 application. For mixed fleets or previously repaired machines, add clear old-unit photos so a substituted starter does not become the only fitment evidence.

For fitment reviewers comparing nearby starter versions, start with the complete reference and application, then compare the 11T drive, flange shape and terminal orientation. A physical difference should be resolved before volume pricing is accepted.

K2305-3708100 Wholesale Supply for Distributors and Importers

For wholesale program managers confirming an incoming batch, importers planning K2305-3708100 stock can request volume pricing, neutral or reviewed private-label packaging and agreed inspection records. Standard guidance is 20 pcs minimum, 7–15 days after confirmation and 18 months warranty under sales terms.

For sales teams preparing a volume quote, the order specification may include armature, solenoid, no-load or load testing together with label and packaging requirements. This gives receiving teams practical points for sampling a batch without treating appearance alone as proof of fitment.

K2305-3708100 Starter Motor Buyer FAQ

How should a distributor confirm K2305-3708100 order testing when confirming the commercial line?

For distributors planning mixed-model inventory, Elecdura can discuss armature, solenoid, no-load and load testing for K2305-3708100. State the required report format, sampling expectation and acceptance points in the RFQ. Testing should use the stated 24V and 8.5kW configuration, while identity and mounting checks remain separate because electrical results do not prove physical interchangeability.

Which check should lead 24V system compatibility before stock is assigned?

For technical buyers preparing a technical RFQ, K2305-3708100 is a 24V starter and must be connected only to the matching machine electrical system. Read the voltage marking on the old unit and verify the battery arrangement before the PO is released. A housing can look correct while the winding and solenoid are designed for another voltage, so appearance must not override the electrical label.

What should receiving teams compare on 8.5kW output on YUCHAI 6K10 for a first trade order?

For engine-parts specialists checking version-defining data, the 8.5kW rating belongs to the K2305-3708100 configuration used for YUCHAI 6K10. Verify the old-unit rating and investigate battery voltage, cable drop and engine turning resistance before choosing another output. A higher or lower kW figure is not an automatic upgrade; it can indicate a separate starter design with different electrical and mechanical requirements.

Which check should lead YUCHAI 6K10 previously replaced starter before a purchase order is released?

For fleet-parts buyers confirming electrical ratings, ask whether the starter removed from YUCHAI 6K10 is original or an earlier replacement. If it has been substituted before, the visible unit may not represent the equipment's initial build. Use its label and geometry together with K2305-3708100, 24V, 8.5kW and 11T before turning that history into a bulk stocking decision.

How can a buyer screen K2305-3708100 side-profile photograph during an application review?

For technical sales teams checking repeat-order specifications, the side profile of K2305-3708100 shows body length, solenoid placement and the relationship between flange and drive. Compare it with a square side view of the removed starter, then use 33.5±1 mm where available. This angle helps reveal a housing or projection difference that a front-only photograph can miss.

Which check should lead K2305-3708100 carton identification for warehouse identification?

For sourcing managers updating a customer item master, ask that unit and carton labels repeat the agreed reference, 24V, 8.5kW and 11T where the packaging format permits. Add the customer's barcode and destination marks before production. Clear identification allows distributors to receive, bin and pick this version without opening packaging or relying on a generic starter description.

How should a distributor confirm YUCHAI 6K10 cranking condition when confirming the quote position?

For application specialists checking application evidence, before replacing the starter on YUCHAI 6K10, test battery state, voltage drop across positive and ground paths, the start signal and ring-gear condition. Note cranking voltage and any abnormal noise. Those observations help distinguish a supply-circuit or engine-load problem from a fault in the 24V, 8.5kW starter and make a technical inquiry easier to resolve.

How should a workshop distinguish K2305-3708100 three-view gallery when checking a replacement proposal?

For replacement-parts sellers preparing an OE-based quote, use the drive-end view to compare the pinion and flange, the side profile to judge housing length and solenoid position, and the rear view to check terminals. All three images belong to K2305-3708100; they should be reviewed together with the 11T drive and YUCHAI 6K10 application. Request an additional close-up when the customer's unit hides a deciding feature.

Request a Wholesale Quote for K2305-3708100 Agricultural Machinery Starter Motor

For warehouse planners planning a repeat order, discuss a K2305-3708100 supply program with Elecdura by sending the OE reference, application, annual or initial quantity, destination and branding needs. The reply will identify the offered product version and agreed commercial options.