K6000-3708100 Yuchai 6K Starter Motor Wholesale

K6000-3708100 Starter Motor Distributor Application Guide for Yuchai 6K engine

For a fleet parts team, K6000-3708100 identifies one Yuchai 6K engine requirement. The 24V 8.0kW 11T module-3 catalog configuration provides a clear fitment boundary for sample, stock and replacement reviews.

For the first K6000-3708100 order, include the removed-unit label, application details and straight photographs of the drive end and terminals. Quantity, destination, delivery target and any private-label requirement complete the commercial brief and reduce the risk of pricing a related but physically different starter.

K6000-3708100 Starter Motor Specification Table for B2B Sourcing

K6000-3708100 Yuchai 6K engine 24V 8.0kW 11T starter mounting dimensions.

Check the K6000-3708100 drawing against the removed starter at the mounting face and drive end. The critical references are 3 mounting holes shown as 15, 15, 15 mm, Ø92 mm locating diameter, Ø146 mm mounting-hole circle and 48 mm drive-end distance. A physical mismatch should stop the unit from entering ordinary stock until the application is clarified.

After the K6000-3708100 mounting check, verify 24V, 8.0kW, 11T and CW with module 3.5. The final visual review covers the terminal studs, control connector and pinion. This prevents a physically related starter from being approved only because its reference appears in the same family.

K6000-3708100 Starter Motor OE Cross-References for Distributor Enquiries

• Use the full number: Start with K6000-3708100, M34003708100B002, STP3016MH, STP5019MH, M105R3016SE, M105R3019SE, retaining prefixes, suffixes and separators in the RFQ.

• Confirm the hardware: The final match requires the stated electrical rating, drive, mounting interface and terminal side; unmatched versions should remain separate.

K6000-3708100 Starter Motor Aftermarket Supply for Regional Distributors

Wholesale planning for K6000-3708100 can cover a sample stage, routine replenishment and urgent service demand. Elecdura normally works from 20 pieces, confirms a 7–15 day lead time after order approval and provides an 18-month warranty under the agreed commercial terms.

Buyers can state service urgency, supported equipment count and expected monthly use in the same RFQ. Elecdura can then discuss stock, production, packaging and staged delivery while maintaining the specified K6000-3708100 drive end and electrical rating throughout the order.

B2B buyers can use the video to review Elecdura’s starter-motor assembly and test process. The approved K6000-3708100 configuration remains defined by 24V, 8.0kW, 11T, CW, mounting geometry and terminals, which should be retained in the purchase record.

K6000-3708100 Starter Motor Questions from Commercial Buyers

Which checks should follow an OE-number match for K6000-3708100 in a Yuchai 6K branch sourcing program?

A number match narrows the search but does not finish it. For K6000-3708100, compare the stated application, electrical output, 11T drive, mounting geometry and terminal side. Buyers handling several references should list each complete number separately, allowing any genuinely different unit to receive its own offer and sample check.

How should Yuchai distributors plan stock for K6000-3708100 in a Yuchai 6K branch program?

Retain engine build and connector evidence for repeat Yuchai orders. Add recent usage, equipment population, transfer time and service level. Elecdura can then separate sample, emergency and replenishment quantities and plan packing or staged delivery around the buyer’s schedule.

How should a fleet workshop verify K6000-3708100 against the removed starter during branch sourcing?

For K6000-3708100 in Yuchai 6K engine, confirm the machine or engine identity and read the full old-unit label. Check 11T, Ø146 mm mounting-hole circle, Ø92 mm locating diameter and terminal orientation. Treat a different drive end or connector position as a separate item when the stated application overlaps.

Which electrical conditions can imitate a failed K6000-3708100 starter motor during a Yuchai 6K branch electrical check?

Before fitting K6000-3708100, verify battery condition, cable size and voltage drop at cranking current. Clean the mounting ground and inspect the ring gear and control circuit. A slow-crank complaint can come from weak batteries, poor connections or mechanical drag, so those causes should be separated from the starter itself.

How does the K6000-3708100 mounting drawing support product approval during a Yuchai 6K branch inspection?

For K6000-3708100, compare 3 mounting holes shown as 15, 15, 15 mm and Ø146 mm mounting-hole circle in a straight front view, then Ø92 mm locating diameter and 48 mm drive-end distance in the side view. Add 11T, CW and terminal orientation; this is more reliable than an angled overall photograph.

Which physical points should be checked before K6000-3708100 enters branch stock during a Yuchai 6K branch receiving check?

For K6000-3708100, match carton and product labels to the purchase order, then sample 24V, 11T, 3 mounting holes shown as 15, 15, 15 mm and terminal protection. Check the flange and pinion for shipping damage. Record lot numbers and arrival photographs, and isolate any different configuration before it is placed in saleable stock.

Which order conditions should be stated when asking about K6000-3708100 in a Yuchai 6K branch sourcing program?

A useful RFQ states K6000-3708100, the machine or engine model, old-unit label, mounting and terminal photographs, requested quantity and delivery country. Include whether the demand is a sample, urgent service order or scheduled stock. Those details allow pricing to cover the correct unit and realistic shipping plan.

Which test results help investigate a returned K6000-3708100 starter in a Yuchai 6K branch review?

For a service review of K6000-3708100, identify the shipment and unit, describe the starting condition and record installation details. Add photographs of the drive, flange and terminals plus battery, ground and positive-cable test results. If the unit was removed, protect it from additional damage and retain it until the review is complete.

K6000-3708100 Request a Starter Motor Fleet Supply Quote

A complete RFQ for K6000-3708100 should state the application, removed-unit number, physical photographs, quantity, destination and delivery target. Send these details to info@elecdurauto.com for a direct response on the correct 24V 8.0kW 11T CW starter, MOQ, packaging, warranty and shipping choices.