M93R3005ASE Yuchai 6A Starter Motor Wholesale

M93R3005ASE Starter Motor Distributor Application Guide for Yuchai 6A, 6G, 6J, 4E or 4G and Cummins ISBE

For a fleet parts team, M93R3005ASE identifies one Yuchai 6A, 6G, 6J, 4E or 4G and Cummins ISBE requirement. The 24V 6.0kW 11T module-4 configuration with the cataloged Ø88 mm locating face provides a clear fitment boundary for sample, stock and replacement reviews.

A useful enquiry pairs M93R3005ASE with the equipment record, old-starter label and clear front, side and terminal images. Add the order quantity, destination and required date so technical selection, sample planning, carton marking and freight options can be addressed in one response.

M93R3005ASE Starter Motor Mounting Dimensions for Distributor Approval

Use the M93R3005ASE technical drawing to check Ø88 mm locating diameter, 32 mm drive-end distance and Ø127 mm mounting-hole circle. Add the 3 mounting holes shown as 13.5, 13.5, 13.5 mm to the receiving sheet. These are practical controls for an approved sample because they can be measured before the starter is installed or released to branch stock.

Complete the M93R3005ASE comparison with 24V, 6.0kW, the 11T drive, module 4 and CW rotation. Review pinion condition, terminal location and available cable clearance together. These controls prevent a valid OE search result from being treated as automatic physical interchangeability.

M93R3005ASE Starter Motor Reference Group for Wholesale Sourcing

• Use the full number: Start with STP3913LC, STP3913MH, STP3913UW, STP3918MA, STP3918MH, STP3918UW, retaining prefixes, suffixes and separators in the RFQ.
• Confirm the hardware: The final match requires the stated electrical rating, drive, mounting interface and terminal side; unmatched versions should remain separate.

M93R3005ASE Starter Motor Distributor Stock and Delivery Support

MOQ begins at 20 pieces, with normal lead time of 7–15 days after order confirmation and an 18-month warranty under agreed terms. For M93R3005ASE, the offer can distinguish samples, available stock and production quantities while confirming carton protection and the shipment plan for the destination.

Identify the exact Yuchai or Cummins engine and verify the 11T module-4 drive before quotation. Once that boundary is fixed, purchasing can separate urgent units from routine replenishment and define branch quantities, stock labels and freight timing without encouraging an unverified substitute.

Elecdura’s video shows starter-motor production and electrical testing used to support wholesale orders. It provides supplier-capability context for M93R3005ASE; the product decision itself still depends on the complete reference, 24V 6.0kW rating, drive end, mounting face and terminal layout.

M93R3005ASE Starter Motor Questions from Commercial Buyers

What traceability details should accompany a warranty enquiry for M93R3005ASE in a Yuchai 6A branch review for Yuchai module-4 stock control?

Keep the carton or product traceability code and note when and where M93R3005ASE was installed. A review should include symptoms, operating time, old and replacement-unit photographs, cable and battery readings and any ring-gear observations. Complete evidence allows technical support to respond without repeated requests for basic information.

Which old-unit checks matter most when sourcing M93R3005ASE during branch sourcing for Yuchai module-4 stock control?

Confirm M93R3005ASE with the complete OE number, Yuchai 6A, 6G, 6J, 4E or 4G and Cummins ISBE record and clear front, side and terminal photographs. Check 11T, 3 mounting holes shown as 13.5, 13.5, 13.5 mm and 32 mm drive-end distance so visually related starters stay on separate order lines.

How should buyers use the M93R3005ASE cross-reference group in a Yuchai 6A branch sourcing program for Yuchai module-4 stock control?

A number match narrows the search but does not finish it. For M93R3005ASE, compare the stated application, electrical output, 11T drive, mounting geometry and terminal side. Buyers handling several references should list each complete number separately, allowing any genuinely different unit to receive its own offer and sample check.

What workshop readings are useful when diagnosing a starting complaint involving M93R3005ASE in a Yuchai 6A branch workshop for Yuchai module-4 stock control?

Load-test the battery set and measure voltage drop on the positive and ground circuits while cranking. Inspect cable lugs, chassis grounds, the start-control signal and ring-gear condition before replacing M93R3005ASE. These checks distinguish a starter fault from low battery capacity, resistance or a control-circuit problem.

Why is a straight mounting-face photo useful for confirming M93R3005ASE during a Yuchai 6A branch inspection for Yuchai module-4 stock control?

Align the removed starter and M93R3005ASE at the mounting face. Compare Ø88 mm locating diameter, Ø127 mm mounting-hole circle, 3 mounting holes shown as 13.5, 13.5, 13.5 mm and 32 mm drive-end distance. Use the drawing for dimensions, measure with suitable tools and check terminals separately.

Can urgent service demand and routine M93R3005ASE replenishment share one enquiry in a Yuchai 6A branch program for Yuchai module-4 stock control?

Separate planned maintenance demand from breakdown coverage and new-account stock. Share the number of supported machines, recent M93R3005ASE usage, transfer time between branches and the desired reserve. The resulting order can combine immediate units and scheduled replenishment while keeping the application and physical specification clearly identified.

How can a buyer quarantine a mismatched M93R3005ASE unit quickly during a Yuchai 6A branch receiving check for Yuchai module-4 stock control?

For M93R3005ASE, count the cartons, compare labels and inspect selected units for flange, pinion and terminal damage. The sample should match 3 mounting holes shown as 13.5, 13.5, 13.5 mm, Ø88 mm locating diameter and the specified 11T drive. Hold any exception outside normal inventory until purchasing and the supplier agree on the correct disposition.

What should be included in a wholesale enquiry for M93R3005ASE in a Yuchai 6A branch sourcing program for Yuchai module-4 stock control?

Send the complete OE number, exact Yuchai 6A, 6G, 6J, 4E or 4G and Cummins ISBE details, removed-unit photographs, quantity and destination. Add the required arrival date, carton marking, payment preference and any sample request. Elecdura can then quote the specified 24V 6.0kW 11T CW starter with packing, lead time, warranty and freight options.

M93R3005ASE Send a Starter Motor Distributor Enquiry

For a focused M93R3005ASE quotation, share the machine or engine record, old-starter number, mounting and terminal images, order volume, delivery country and timing. You can email the RFQ directly to info@elecdurauto.com; Elecdura will reply with the matching specification, availability, packing and commercial terms.