K6000-3708100 Yuchai Starter Motor 24V 8.5kW 11T

K6000-3708100 Agricultural Machinery Starter Motor for YUCHAI YC6K12

For fleet-parts buyers requesting production pricing, built for YUCHAI YC6K12, this agricultural machinery starter motor combines 24V operation, 8.5kW rated power and a 11T drive. Elecdura supplies K6000-3708100 for tractor, farm-equipment and industrial-engine replacement programs, including distributor stock and planned replenishment.

For private-label buyers defining label requirements, importers can use the same reference and specification bundle from enquiry through receiving. That continuity helps sales, purchasing and warehouse teams keep a repeat-order item separate from similar housings with another electrical or drive configuration.

K6000-3708100 Starter Motor Specifications and Technical Drawing

For technical sales teams checking repeat-order specifications, the 11T pinion and module 3.5 are important replacement identifiers. Match them with the flange and drive projection to protect the ring gear from an incorrect tooth pitch or engagement depth.

For fitment reviewers confirming the stated application, the source-faithful technical drawing records the available mounting information for K6000-3708100, including 3×Ø15, 126.4 mm; use the printed values together with the product views because the drawing supports comparison and should not be scaled from the screen.

K6000-3708100 Aftermarket Replacement and Application

For purchasing teams comparing the flange and terminals, use K6000-3708100 as the primary product identity for YUCHAI YC6K12. The cross-reference group K6000-3708100 supports aftermarket matching, while the electrical rating and drive-end configuration distinguish the exact version supplied here.

For distributors reviewing a replacement proposal, before a purchase order is released, compare the removed starter's mounting face, 11T drive and terminal direction with the approved gallery. Module 3.5 is part of the pinion definition. Any conflicting physical feature should remain on a separate RFQ line until the correct replacement is confirmed.

K6000-3708100 Wholesale Supply for Distributors and Importers

For aftermarket product managers confirming an incoming batch, Elecdura supports repeat-order and new-line sourcing for K6000-3708100. Commercial planning can cover a 20 pcs MOQ, 7–15 day lead time subject to confirmation, neutral packaging or private-label review, and an 18-month agreed warranty.

For engine-parts specialists preparing a volume quote, define the reference group, accepted product version, inspection request and packaging standard before production. Those records help both sides manage replenishment and resolve any receiving question efficiently.

K6000-3708100 Starter Motor Buyer FAQ

Which comparison prevents a mismatch for K6000-3708100 inquiry package before stock is assigned?

For importers planning mixed-model inventory, A useful inquiry for K6000-3708100 includes quantity, destination, required date, YUCHAI YC6K12, the full old-unit number and clear photos of the label, drive end, front housing and terminal arrangement. State neutral or private-label packaging needs at the same time. Elecdura can then quote the 24V, 8.5kW, 11T version against one complete technical description.

Which detail separates K6000-3708100 three-view gallery for repeatable sourcing?

For product managers preparing a technical RFQ, use the drive-end view to compare the pinion and flange, the side profile to judge housing length and solenoid position, and the rear view to check terminals. All three images belong to K6000-3708100; they should be reviewed together with the 11T drive and YUCHAI YC6K12 application. Request an additional close-up when the customer's unit hides a deciding feature.

What must be matched before quoting 24V system compatibility during fitment review?

For maintenance suppliers checking version-defining data, K6000-3708100 is a 24V starter and must be connected only to the matching machine electrical system. Read the voltage marking on the old unit and verify the battery arrangement before the PO is released. A housing can look correct while the winding and solenoid are designed for another voltage, so appearance must not override the electrical label.

How should a workshop distinguish K6000-3708100 terminal access before accepting a substitute?

For equipment-parts dealers confirming electrical ratings, compare the rear housing and terminal direction in the approved product views for K6000-3708100. The battery cable and start-signal lead must reach without sharp bends, rubbing or contact with hot and moving parts. If the body can be clocked differently within the same reference family, confirm the actual terminal position before stock is committed to the order.

How should a workshop distinguish K6000-3708100 cartons and units for a first bulk order?

For purchasing teams setting packaging requirements, sample cartons from different positions in the shipment and compare the K6000-3708100 labels, 24V marking, 11-tooth pinion, flange shape and terminal protection with the ordered item description. Photograph any mixed marking, damaged terminal or different drive end ahead of installation, and isolate those pieces so the rest of the lot can be assessed consistently.

Which comparison prevents a mismatch for 3×Ø15 before a purchase order is released?

For distributors matching the old starter, the drawing lists 3×Ø15 for K6000-3708100. Count the holes, measure their diameters and compare their positions from the locating face. A matching outer housing does not compensate for a hole pattern that will not seat squarely, so flange geometry should pass before the starter reaches the installation bay.

Which check should lead K6000-3708100 side-profile photograph before comparing delivery options?

For technical buyers checking application evidence, the side profile of K6000-3708100 shows body length, solenoid placement and the relationship between flange and drive. Compare it with a square side view of the removed starter, then use 126.4 mm where available. This angle helps reveal a housing or projection difference that a front-only photograph can miss.

Which specification deserves priority for 3×Ø15 and 126.4 mm when several versions look alike?

For engine-parts specialists preparing an OE-based quote, use the supplied technical drawing to compare 3×Ø15 and 126.4 mm. Take each measurement from the same face shown or described, then compare the locating shoulder, bolt pattern and drive-end projection as one set. A single matching diameter is not enough if the hole pattern or axial reach places the pinion differently.

Request a Wholesale Quote for K6000-3708100 Agricultural Machinery Starter Motor

For regional parts suppliers planning a repeat order, ask for a quote on K6000-3708100 with the full YUCHAI YC6K12 record, quantity and packaging plan. We will verify the requested 24V, 8.5kW and 11T configuration and return the relevant wholesale terms.