D1204-3708100 Yuchai YC4108 Starter Motor B2B Supply

D1204-3708100 Yuchai YC4108 Starter Motor Wholesale Procurement

The D1204-3708100 starter for Yuchai YC4108 is intended for replacement demand. It combines 24V, 5.0kW output with the 11T drive, allowing B2B buyers to keep the quotation tied to one application and physical configuration rather than a broad visual description.

Service network teams handling urgent replacement should send D1204-3708100, the Yuchai YC4108 record, required quantity, destination and delivery timing together. Add straight drive-end and terminal-side photographs of the removed starter. Elecdura can then address consistent rebuild-bench identification, branch-ready labels and the correct physical configuration in one useful commercial offer.

D1204-3708100 Starter Motor Wholesale Mounting and Electrical Checks

The key fit controls are 11T pinion and 40mm reference, mounting face, drive reach and terminal orientation. Compare them as one geometry set, then check the locating face and drive projection against the removed starter. This is more reliable than matching one bolt hole or using an angled marketplace photograph.

Electrical identity and mechanical fit must agree. Verify 24V, the 5.0kW rating and terminal layout, then count the 11 pinion teeth. A correct flange with the wrong system voltage, output or cable position is not an acceptable substitute.

D1204-3708100 Starter Motor Distributor Reorder Identification

D1204-3708100 should remain the lead reference for this Yuchai YC4108 line. Cross-references are useful for discovery, but the buyer should accept them only after the 24V, 5.0kW, 11T, mounting and terminal details agree with the removed starter.

For urgent replacement, keep D1204-3708100, Yuchai YC4108, 24V, 5.0kW and 11T on one purchasing record. At goods-in, review branch stock-location control before releasing the lot. This gives the service network a documented basis for consistent rebuild-bench identification when the next order is raised.

D1204-3708100 Starter Motor Wholesale Packaging and Replenishment

Elecdura supports qualified wholesale orders from 20 pieces, with normal preparation of 7–15 days after order confirmation and an 18-month warranty under agreed sales terms. Neutral packaging is available, and private-label requirements can be reviewed against order quantity, artwork and delivery schedule.

Demand from a mobile diesel service network should keep D1204-3708100 tied to Yuchai YC4108. For urgent replacement, the service network can use an engine-rebuild allocation, retain the accepted sample photographs and review branch stock-location control at goods-in. This supports consistent rebuild-bench identification while keeping branch-ready labels visible.

This video shows Elecdura production and electrical-testing capability for starter-motor supply. It supports supplier evaluation; the D1204-3708100 order should still be based on the listed application, electrical data and physical unit checks.

D1204-3708100 Yuchai YC4108 Starter Motor FAQs

How can a service network source D1204-3708100 for urgent replacement?

Service network teams should tie D1204-3708100 to Yuchai YC4108, 24V, 5.0kW, 11T and the removed-unit photographs before requesting price. For urgent replacement, state quantity, destination and delivery timing, then review branch stock-location control. Ask Elecdura to address branch-ready labels and consistent rebuild-bench identification in the same quotation.

Consistent rebuild-bench identification: Which physical details matter most when comparing D1204-3708100?

Compare 11T pinion and 40mm reference, mounting face, drive reach and terminal orientation with the removed starter, using a straight flange view and a side view parallel to the shaft. Also inspect the locating surface and drive projection. Matching only paint, motor diameter or one mounting ear can hide a difference that affects installation or pinion engagement. File D1204-3708100 with the branch stock-location control check.

During urgent replacement, what should be checked before installing the D1204-3708100 starter?

Load-test the battery, measure voltage drop on positive and ground circuits, inspect cable lugs and confirm the engine turns freely. Check the ring gear and mounting-ground contact as well. These steps help separate a starter concern from weak batteries, high resistance or mechanical drag that can produce similar symptoms. This supports consistent rebuild-bench identification for D1204-3708100.

To support consistent rebuild-bench identification, why should Yuchai YC4108 stay on the D1204-3708100 order line?

The application gives purchasing and receiving teams context that a reference alone may not provide. Keeping Yuchai YC4108, the electrical rating, pinion and confirmed photographs together makes repeat ordering clearer and reduces the chance that a visually related starter from another machine or engine family is substituted. Retain D1204-3708100 for consistent rebuild-bench identification and receiving review.

For urgent replacement handled by a service network, can D1204-3708100 be supplied with private-label packaging?

Neutral packaging is available, and private-label requirements can be reviewed for qualified orders. Send the expected quantity, artwork, label fields, carton preference and destination early. Elecdura will confirm what can be supported, any additional preparation and the effect on lead time before the order is finalized. File D1204-3708100 with the branch stock-location control check.

For urgent replacement handled by a service network, what should receiving staff inspect on the D1204-3708100 shipment?

Confirm carton count, labels and visible condition before sampling. On selected units, compare the pinion, mounting face, solenoid and terminals with the confirmed record. Isolate any damaged or different unit with carton and lot photographs before the remainder is released to normal Yuchai YC4108 inventory. Carry the D1204-3708100 result into branch-ready labels.

To support consistent rebuild-bench identification, how can a distributor plan stock for D1204-3708100?

Use active Yuchai YC4108 customers or machines, recent usage, replenishment time and the cost of an emergency shortage. Separate trial pieces from normal branch stock and project demand. A defined reorder point is more reliable than buying a mixed group only when one urgent workshop request appears. Carry the D1204-3708100 result into branch-ready labels.

To support consistent rebuild-bench identification, what can cause slow cranking besides a fault in D1204-3708100?

Low battery capacity, excessive voltage drop, corroded lugs, weak grounds, undersized cables and mechanical engine drag can all reduce cranking speed. Record loaded battery voltage and cable-drop readings before replacement. This protects the buyer from changing a starter while the original circuit problem remains. This supports consistent rebuild-bench identification for D1204-3708100.

Get D1204-3708100 Yuchai YC4108 Starter Motor Pricing

Email info@elecdurauto.com with D1204-3708100, Yuchai YC4108 details, old-unit photographs, quantity, delivery country and required date. Elecdura will reply with the matching 24V 5.0kW 11T offer, availability, packing, lead time and freight options.