Your Whole New Supply Chain For Heavy-Duty Parts
Whatsapp：
+86 18915027366
Phone：
+86 18915027366
10PA15C
SDLG
IATF 16949, ISO 9001, and other major OEM certification systems
OEM label and ODM customization accepted
50 - 100 pcs
7–15 Days
18 months
10PA15C 12V A1 142 mm configuration
SDLG 660 / 665F excavator
SDLG 660 / 665F excavator; confirm 10PA15C, 12V, A1 142 mm, connector, ports and mounting; confirm the R12-style connection rather than relying on model and pulley
| Quantity: | |
|---|---|
The useful photo set follows the installation: drive side first, then ports, connector and each mounting face.
The fitment decision should end with a visible ability to confirm the R12-style connection rather than relying on model and pulley, supported by the A1 142 mm drive package.
A fleet parts desk asking for a 10PA15C unit still needs the complete SDLG 660 / 665F excavator build, not a bare compressor-family match.
The purchase line should carry 12V, A1, 142 mm and the instruction to confirm the R12-style connection rather than relying on model and pulley; together they describe the assembly being quoted.
| Application | SDLG 660 / 665F excavator |
|---|---|
| Compressor model | 10PA15C |
| Pulley / clutch | A1, 142 mm |
| Clutch voltage | 12V |
| OE / reference | Not specified |
| Replacement type | Complete aftermarket A/C compressor assembly |
| Mounting check | confirm the R12-style connection rather than relying on model and pulley |
The 12V coil is the electrical boundary for this SDLG 660 / 665F excavator item; the removed-unit connector should support that reading before stock is released. Unlisted SDLG 660 / 665F excavator service quantities are not borrowed from a similar 10PA15C application, because another installation may use a different system specification.
Keep this SDLG 660 / 665F excavator assembly out of mixed stock until its 12V lead and A1 142 mm clutch have been checked.
Before commissioning the R12-port single-A 142 mm 12V unit assembly, the technician should follow the SDLG 660 / 665F excavator service procedure for evacuation, refrigerant and oil balance.
For the SDLG 660 / 665F excavator line, the comparison rule is specific: Do not consolidate it with the R134a-port product in stock or quotation sheets. It should be visible to both sales and receiving teams.
A model-family match is only the opening clue; the final SDLG 660 / 665F excavator choice still depends on confirm the R12-style connection rather than relying on model and pulley.
Elecdura can discuss mixed compressor orders while keeping each SDLG 660 / 665F excavator configuration on its own pricing and packing line.
Bulk buyers should list R12-port single-A 142 mm 12V unit beside the required quantity and keep private-label artwork separate from the technical confirmation.
Use this buyer checklist when the old 10PA15C unit and nearby variants look deceptively similar.
Elecdura can discuss neutral cartons, buyer-brand labels and packaging artwork for qualified bulk SDLG 660 / 665F excavator programmes. First fix 10PA15C, 12V, A1, 142 mm and R12-port single-A 142 mm 12V unit. A clear identity prevents custom packing from concealing a mixed variant.
The physical confirmation is to confirm the R12-style connection rather than relying on model and pulley. Write SDLG 660 / 665F excavator, 10PA15C, 12V, A1 and 142 mm on the same ordering line. For the SDLG 660 / 665F excavator order, that combination describes R12-port single-A 142 mm 12V unit without asking a family name to carry the whole decision.
State R12-port single-A 142 mm 12V unit and ask the supplier to confirm the R12-style connection rather than relying on model and pulley. Provide the SDLG 660 / 665F excavator application, 10PA15C identity, quantity and destination with old-unit label and multi-angle photos. Retain packaging or buyer-brand requirements on a separate SDLG 660 / 665F excavator RFQ line so pricing stays attached to the right compressor.
Photograph the clutch face, head, hose connections and every mounting side on the SDLG 660 / 665F excavator machine. One wider image of the SDLG 660 / 665F excavator installation needs to preserve hose and head orientation. The buyer must be able to confirm the R12-style connection rather than relying on model and pulley for this R12-port single-A 142 mm 12V unit request.
Do not approve a substitution from 10PA15C alone. Do not consolidate it with the R134a-port product in stock or quotation sheets. Compare the A1 142 mm clutch, 12V connector, head and ears as a single SDLG 660 / 665F excavator assembly.
For the SDLG 660 / 665F excavator workshop, inspect belt tracking, condenser airflow, hoses and circuit cleanliness, then use its machine data for evacuation, refrigerant and oil balance. Find the reason the old SDLG 660 / 665F excavator compressor failed before fitting the replacement. Those checks protect the R12-port single-A 142 mm 12V unit assembly from an unresolved system fault.
Add one wider image before removal so orientation remains visible. Provide a straight clutch view, a head-and-port view, both mounting sides and a readable old-unit label from the SDLG 660 / 665F excavator installation. Those angles let the supplier confirm the R12-style connection rather than relying on model and pulley and recognize R12-port single-A 142 mm 12V unit.
Match the carton line to R12-port single-A 142 mm 12V unit, then inspect the A1 142 mm clutch and 12V connection. Retain the ports capped while staff check whether they can confirm the R12-style connection rather than relying on model and pulley. A conflicting SDLG 660 / 665F excavator unit needs to remain outside available stock.
Send the required quantity, destination and packaging plan with the old-unit label and clear installation photographs. Include R12-port single-A 142 mm 12V unit and ask Elecdura to confirm the R12-style connection rather than relying on model and pulley before the SDLG 660 / 665F excavator compressor is priced.
