10S15C 24V PV6 110 mm Heavy-Duty A/C Compressor for Shifeng Fengshun truck

Distributor Photo Check for This 10S15C A/C Compressor

Before the old core is returned, record the clutch face, connector, head orientation and the spacing between mounting ears.

The removed compressor should prove PV6 110 mm 24V drive; in practical terms that means the buyer can confirm six ribs, 110 mm diameter and truck-side connector.

Shifeng Fengshun truck A/C Compressor Specifications for Wholesale Review

The 24V coil is the electrical boundary for this Shifeng Fengshun truck item; the removed-unit connector should support that reading before stock is released. The table describes the sale item; evacuation, charge and oil-balance procedures remain subject to the applicable Shifeng Fengshun truck workshop data.

Fleet Replacement 10S15C A/C Compressor for Shifeng Fengshun truck

This Shifeng Fengshun truck listing is written for buyers who must price a service-ready compressor assembly and keep close-looking variants apart.

Pricing can proceed cleanly when 10S15C, 24V, PV6 and 110 mm are recorded beside the Shifeng Fengshun truck application.

Distributor Variant Control for the Shifeng Fengshun truck A/C Compressor

A nearby 10S15C assembly may share a casting, yet the shared compressor family does not prove interchangeability with FAW three-pin applications. Distributor staff should treat the difference as a new SKU.

Warehouse staff can compare the clutch, connector, head and ears against the saved product image before placing this Shifeng Fengshun truck compressor in available inventory.

Fleet Workshop Preparation for This 10S15C A/C Compressor

Before binning this Shifeng Fengshun truck compressor, compare the carton line with the product image and inspect the clutch face, head and mounting ears for damage.

The workshop should diagnose the original failure, inspect belt tracking and check the A/C circuit for contamination before installing this Shifeng Fengshun truck replacement.

Importer Quotation Inputs for the Shifeng Fengshun truck A/C Compressor

This 10S15C assembly can be quoted for regional distribution, fleet supply or buyer-brand packaging rather than retail-only demand.

A quotation should state 10S15C, 24V, PV6, 110 mm and PV6 110 mm 24V drive, followed by the requested delivery destination.

10S15C A/C Compressor FAQ for Shifeng Fengshun truck Wholesale Buyers

Use this buyer checklist when the old 10S15C unit and nearby variants look deceptively similar.

On the Shifeng Fengshun truck fleet purchase line, which physical check matters most before quoting this compressor?

One wider image of the Shifeng Fengshun truck installation needs to preserve hose and head orientation. Photograph the clutch face, head, hose connections and every mounting side on the Shifeng Fengshun truck machine. The buyer must be able to confirm six ribs, 110 mm diameter and truck-side connector for this PV6 110 mm 24V drive request.

During incoming inspection for Shifeng Fengshun truck, which product facts must be fixed before private labeling?

First fix 10S15C, 24V, PV6, 110 mm and PV6 110 mm 24V drive. Elecdura can discuss neutral cartons, buyer-brand labels and packaging artwork for qualified bulk Shifeng Fengshun truck programmes. A clear identity prevents custom packing from concealing a mixed variant.

Before quoting Shifeng Fengshun truck, how does PV6 110 mm 24V drive affect compressor selection?

Retain PV6 and 110 mm together on the Shifeng Fengshun truck line because belt section, groove count and clutch diameter affect alignment. On the Shifeng Fengshun truck installation, a near-size pulley may move the belt path even when the 10S15C casting looks familiar. The old clutch face needs to support PV6 110 mm 24V drive.

While the old Shifeng Fengshun truck compressor is available, what should a wholesale RFQ include for this Shifeng Fengshun truck compressor?

State PV6 110 mm 24V drive and ask the supplier to confirm six ribs, 110 mm diameter and truck-side connector. Provide the Shifeng Fengshun truck application, 10S15C identity, quantity and destination with old-unit label and multi-angle photos. Retain packaging or buyer-brand requirements on a separate Shifeng Fengshun truck RFQ line so pricing stays attached to the right compressor.

For a repeat Shifeng Fengshun truck RFQ, what keeps this 10S15C unit out of similar stock bins?

Name the stock line with Shifeng Fengshun truck, 10S15C, 24V, PV6 and 110 mm. Save the exact product image beside the receiving record and retain the phrase PV6 110 mm 24V drive. The shared compressor family does not prove interchangeability with FAW three-pin applications.

While separating Shifeng Fengshun truck variants, what is the main wrong-variant risk for this Shifeng Fengshun truck compressor?

The shared compressor family does not prove interchangeability with FAW three-pin applications. Do not approve a substitution from 10S15C alone. Compare the PV6 110 mm clutch, 24V connector, head and ears as a single Shifeng Fengshun truck assembly.

Before quoting Shifeng Fengshun truck, how should a distributor confirm the named Shifeng Fengshun truck application?

Treat Shifeng Fengshun truck as the intended application, then check the machine plate and removed-unit photographs. Equipment revisions can alter brackets, connectors or ports, which is why the buyer still needs to confirm six ribs, 110 mm diameter and truck-side connector. The PV6 110 mm 24V drive description stays with the quoted unit.

During a workshop fitment check for Shifeng Fengshun truck, which facts identify the Shifeng Fengshun truck 10S15C A/C compressor?

Write Shifeng Fengshun truck, 10S15C, 24V, PV6 and 110 mm on the same ordering line. The physical confirmation is to confirm six ribs, 110 mm diameter and truck-side connector. For the Shifeng Fengshun truck order, that combination describes PV6 110 mm 24V drive without asking a family name to carry the whole decision.

Request a Wholesale 10S15C A/C Compressor Quote for Shifeng Fengshun truck

Send the required quantity, destination and packaging plan with the old-unit label and clear installation photographs. Include PV6 110 mm 24V drive and ask Elecdura to confirm six ribs, 110 mm diameter and truck-side connector before the Shifeng Fengshun truck compressor is priced.