5S14 24V A1 132 mm Heavy-Duty A/C Compressor for Caterpillar 320B excavator

Wholesale 5S14 A/C Compressor for Caterpillar 320B excavator

Downtime on Caterpillar 320B excavator is expensive, so the compressor must arrive ready for the exact belt, hose and mounting layout. This complete 5S14 replacement uses single-A 132 mm 24V Sanden 5S14 configuration. For older Caterpillar excavator support where exact belt and head identity limits downtime, the 24V, A1 and 132 mm clutch, head and mounting arrangement define the physical build a buyer is ordering.

The intended customer is a distributor or fleet buyer who needs the same configuration again, not a one-off generic reference for Caterpillar 320B excavator with 24V, A1 and 132 mm. Linking the Caterpillar 320B excavator application to 24V, A1 and 132 mm gives that buyer a record suitable for purchasing and later replenishment.

Distributor Specification Check for the 5S14 A/C Compressor

A distributor can copy the table directly into its stock card, but the old unit still provides the final visual comparison. That matters because 5S14 compressors may share a body family while carrying a different clutch, voltage, connector or hose head for Caterpillar 320B excavator.

Importer Photo Review for This 5S14 A/C Compressor

For this 5S14 order, one front photograph is insufficient. The supplier needs separate angles showing the A1 clutch, hose head, electrical connection and feet, plus an installed Caterpillar 320B excavator view where space allows.

Confirm the A-belt clutch, 132 mm diameter, 24V lead and 320B mounting layout. Record the result beside 24V, A1 and 132 mm and the Caterpillar 320B excavator application so receiving can use the same evidence as purchasing.

Fleet Parts Boundaries for This 5S14 A/C Compressor

Twin-A 5S14 compressors and units with other socket layouts are different configurations. That is the practical boundary between this Caterpillar 320B excavator product and the nearest look-alike; this order is for the 24V, A1 and 132 mm version. Purchasing can preserve it by retaining the configuration on the stock card.

For mixed inventory, store the confirmed Caterpillar 320B excavator image beside the full application and drive description. Receiving then has a quick visual reference and is less likely to combine two physical variants under a shortened stock name for Caterpillar 320B excavator with 24V, A1 and 132 mm.

Importer Receiving Review for This 5S14 A/C Compressor

A practical goods-in check starts with the stock card and ends with the physical assembly for Caterpillar 320B excavator with 24V, A1 and 132 mm. Match Caterpillar 320B excavator and 24V, A1 and 132 mm, inspect the mounting points, and photograph any discrepancy before stock is released.

A fleet replacement is ready to install only after the surrounding circuit is ready for Caterpillar 320B excavator with 24V, A1 and 132 mm. For Caterpillar 320B excavator, inspect the belt, hoses, condenser airflow and contamination risk before putting the new 5S14 compressor into service.

Distributor RFQ Details for This 5S14 A/C Compressor

Importers can request bulk pricing, neutral packing or private-label presentation for this Caterpillar 320B excavator compressor. Product identity is settled through 24V, A1 and 132 mm and the fitment evidence before packaging and marking become commercial choices.

If purchasing is comparing suppliers, give each one the same Caterpillar 320B excavator application, 24V, A1 and 132 mm and photo evidence. Consistent input produces quotations that are easier to compare on scope, packing and delivery in the Caterpillar 320B excavator 24V, A1 and 132 mm order.

Wholesale 5S14 A/C Compressor Questions from Buyers

The answers focus on the decisions an aftermarket purchasing team faces before this Caterpillar 320B excavator assembly becomes repeat inventory.

Which photos help confirm this Caterpillar 320B excavator compressor?

Use uncropped angle shots rather than a collage: clutch, ports, connector, front mount, rear mount and installed position for Caterpillar 320B excavator. Keep them with the stock card for repeat purchasing.

Is the 5S14 family number enough to confirm fitment?

A matching 5S14 casting can still carry the wrong clutch or hose direction. Fitment is confirmed only when those physical details also match Caterpillar 320B excavator.

What wrong-stock risk applies to this A1 5S14 compressor?

Twin-A 5S14 compressors and units with other socket layouts are different configurations. The distinction should remain visible from RFQ through receiving, even when both compressors share familiar castings in the Caterpillar 320B excavator 24V, A1 and 132 mm order.

What identifies this Caterpillar 320B excavator A/C compressor?

Start with Caterpillar 320B excavator and 5S14; finish the identification with 24V, A1 and 132 mm and the visible head and mounting layout. For Caterpillar 320B excavator, this keeps a similar compressor from inheriting the order by name alone.

Can this Caterpillar 320B excavator compressor use private-label packing?

Yes, subject to volume and program review. Elecdura first confirms the 5S14 configuration, then quotes the requested carton, label and identification treatment.

Why does port direction matter on this 5S14 compressor?

A different head can change outlet angle, fitting style or service access during the Caterpillar 320B excavator 24V, A1 and 132 mm review. Compare the offered 5S14 port block directly with the removed compressor before shipment.

What should a wholesale RFQ include for this 5S14 compressor?

Send the confirmed stock card, expected order quantity and receiving country in the Caterpillar 320B excavator 24V, A1 and 132 mm order. First-time enquiries should also include clear clutch, port and mounting photographs during the Caterpillar 320B excavator 24V, A1 and 132 mm review.

Why must the A1 132 mm clutch stay on the RFQ?

Keeping the clutch on the RFQ lets the supplier compare the actual drive rather than only the 5S14 family. It also gives receiving a measurable feature to check.

Send an RFQ for This Caterpillar 320B excavator A/C Compressor

A first enquiry should include separate clutch, head, connector and mounting photographs plus the commercial requirements in the Caterpillar 320B excavator 24V, A1 and 132 mm order. Repeat buyers can reference the confirmed stock card when requesting the next 5S14 shipment. Once the physical match is accepted, the same stock card can support purchasing, receiving and future distributor replenishment. For Caterpillar 320B excavator, retain the reference image and full 24V, A1 and 132 mm description with the quotation so later replenishment follows the same physical build.